|
|
11-10-2020, 10:41 AM
|
|
|
Join Date: May 2007
Posts: 16,287
|
|
What did you do in your reloading room today?
So far nothing. But, I saw this type of thread on another forum. It was full of pictures, gear reviews, process etc. It looked like a great idea. Maybe it will work here.
So what did you do in your reloading room today? :-)
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-10-2020, 12:16 PM
|
|
|
Join Date: Oct 2007
Posts: 718
|
|
I would love to show you! But im a clueless twit when it comes to posting pics on here....lol
|
11-10-2020, 04:39 PM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,791
|
|
I was down to the reloading room about 6:15 this morning.
I took 2 rifles out of there storage spaces, and went hunting with them(not both at the same time)
__________________
There are no absolutes
|
11-10-2020, 05:25 PM
|
|
|
Join Date: May 2007
Posts: 16,287
|
|
Getting ready to butcher tonight.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-10-2020, 06:43 PM
|
|
|
|
Join Date: Apr 2015
Location: Lloydminster
Posts: 4,844
|
|
Not a darn thing, it's hunting season the loading room hibernates now till December
Did all my loading during lock down
__________________
The problem we have today is that the people who work for a living are outnumbered by the people who vote for a living.
We were all born ignorant but one must work very hard to remain that way.
|
11-10-2020, 07:25 PM
|
|
|
Join Date: May 2007
Posts: 16,287
|
|
I also melted some brass for science. :-)
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-15-2020, 01:16 PM
|
|
|
|
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
|
|
7mm-08 120 NBT 44.4gr RL15 2.780”
|
11-16-2020, 12:08 AM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
I love this thread. I bought my reloading gear and love the ideas this thread gives me.
I have a question. Does reloading room temps play a role in performance? Im thinking about using my garage as my current house doesn’t have the room to dedicate a room or space to reloading. So if I did reloading in the garage in the spring, temps being 10-13 degrees, would I see a variable if I went to reload in said garage in the early summer with temps in the 18-22 degree range?
Im thinking yes since the explosion is fuelled by oxygen after initial spark. So if I reloaded in colder temps, oxygen is denser, so I would see a slightly faster load in this circumstance?
And if I my thinking right, does it even matter? I know in engines it matters. I just haven’t noticed this topic come up much. Humidity comes up for sure. Also issues with max loads and pressure (loading in cold and then firing in the summer). That last part suggests there may be some truth to the air ratio idea...
Sent from my iPhone using Tapatalk
|
11-16-2020, 05:26 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,900
|
|
Quote:
Originally Posted by KazIce
I love this thread. I bought my reloading gear and love the ideas this thread gives me.
I have a question. Does reloading room temps play a role in performance? Im thinking about using my garage as my current house doesn’t have the room to dedicate a room or space to reloading. So if I did reloading in the garage in the spring, temps being 10-13 degrees, would I see a variable if I went to reload in said garage in the early summer with temps in the 18-22 degree range?
Im thinking yes since the explosion is fuelled by oxygen after initial spark. So if I reloaded in colder temps, oxygen is denser, so I would see a slightly faster load in this circumstance?
And if I my thinking right, does it even matter? I know in engines it matters. I just haven’t noticed this topic come up much. Humidity comes up for sure. Also issues with max loads and pressure (loading in cold and then firing in the summer). That last part suggests there may be some truth to the air ratio idea...
Sent from my iPhone using Tapatalk
|
In the big picture of things , no temperature of your loading room does not affect the performance of your ammo.
The temperature of your ammo at the time of firing has an effect on performance however, but for hunting it is not an issue, for long range match shooting , yes, but even then some disagree with this statement
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
11-16-2020, 07:11 PM
|
|
|
|
Join Date: Dec 2013
Location: In your personal space.
Posts: 4,789
|
|
Quote:
Originally Posted by KazIce
I love this thread. I bought my reloading gear and love the ideas this thread gives me.
I have a question. Does reloading room temps play a role in performance? Im thinking about using my garage as my current house doesn’t have the room to dedicate a room or space to reloading. So if I did reloading in the garage in the spring, temps being 10-13 degrees, would I see a variable if I went to reload in said garage in the early summer with temps in the 18-22 degree range?
Im thinking yes since the explosion is fuelled by oxygen after initial spark. So if I reloaded in colder temps, oxygen is denser, so I would see a slightly faster load in this circumstance?
And if I my thinking right, does it even matter? I know in engines it matters. I just haven’t noticed this topic come up much. Humidity comes up for sure. Also issues with max loads and pressure (loading in cold and then firing in the summer). That last part suggests there may be some truth to the air ratio idea...
Sent from my iPhone using Tapatalk
|
From what I have read unlike black powder, smokeless powder created its own oxygen during combustion. The ambient air that is present while reloading should not make a bunch of difference.
__________________
When in doubt, use full throttle. It may not improve the situation, but it will end the suspense.
|
11-16-2020, 08:40 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
|
|
Ahh...time for some smallness. Reloading precision .223rem tonight. Beginning with some annealing.
Followed by sizing...then trimming....
More to follow...
|
12-06-2020, 10:18 PM
|
|
|
Join Date: May 2007
Location: SE, Saskatchewan
Posts: 671
|
|
Quote:
Originally Posted by KazIce
I love this thread. I bought my reloading gear and love the ideas this thread gives me.
I have a question. Does reloading room temps play a role in performance? Im thinking about using my garage as my current house doesn’t have the room to dedicate a room or space to reloading. So if I did reloading in the garage in the spring, temps being 10-13 degrees, would I see a variable if I went to reload in said garage in the early summer with temps in the 18-22 degree range?
Im thinking yes since the explosion is fuelled by oxygen after initial spark. So if I reloaded in colder temps, oxygen is denser, so I would see a slightly faster load in this circumstance?
And if I my thinking right, does it even matter? I know in engines it matters. I just haven’t noticed this topic come up much. Humidity comes up for sure. Also issues with max loads and pressure (loading in cold and then firing in the summer). That last part suggests there may be some truth to the air ratio idea...
Sent from my iPhone using Tapatalk
|
Id be more concerned with the humidity In a garage. If vehicles are not coming and going then it Be ok.
|
11-16-2020, 09:25 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
Thank you Cat & Berger!
Sent from my iPhone using Tapatalk
|
11-16-2020, 09:42 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,457
|
|
Mounted the scope I repaired onto a nice 6.5x55 Brno (my new coyote rig) ....... Now just need to find the range under the snow so I can sight in.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
11-17-2020, 06:38 AM
|
|
|
|
Join Date: Sep 2007
Location: Calgary Area
Posts: 277
|
|
7mm-08 and broadheads
I loaded 50 7mm-08, 140 gr TSX, 42 gr of 4064. Decapped, sized and trimmed the rest of my 7mm-08 brass.
Also re-sharpened all the broadheads I shot this fall.
__________________
Proud member of the Boom and Crockpot and Poke and Yum Clubs - Eating tomorrow's trophies today.
|
11-17-2020, 07:45 AM
|
|
|
Join Date: Nov 2018
Posts: 145
|
|
not much, took inventory of brass and supplies, looked at the mess and decided maybe tomorow I'll tidy it up, today I'll just cast some 44's and some 458's outside while it's still nice out.
|
11-17-2020, 09:50 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,457
|
|
Mounted a 10X J. Unertal, Vulture scope on a semi benchrest rifle in .222 Rem and an older Sako L46 action. That was an all day challenge to get it right. But was worth it.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
11-30-2020, 05:37 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
I built my reloading bench today! Went to setup my press... and the handle is missing from the box. I contacted Lyman, let’s see what they do!
The garage floor is not level, so I had to move the left leg inwards to achieve level on all angles. It’s anchored to the studs via stud screws so it’s going nowhere.
Sent from my iPhone using Tapatalk
|
11-30-2020, 06:13 PM
|
|
|
|
Join Date: May 2007
Location: WMU 303
Posts: 8,539
|
|
Quote:
Originally Posted by KazIce
I built my reloading bench today! Went to setup my press... and the handle is missing from the box. I contacted Lyman, let’s see what they do!
The garage floor is not level, so I had to move the left leg inwards to achieve level on all angles. It’s anchored to the studs via stud screws so it’s going nowhere.
Sent from my iPhone using Tapatalk
|
What is this that I circled in yellow?
|
11-30-2020, 07:26 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
Quote:
Originally Posted by CNP
What is this that I circled in yellow?
|
It’s a tube for the primer feeder. I don’t completely understand why it would need a secondary covering after the fact; but it’s definitely not the handle. It lacks the threads for the lock nut.
I thought it was it too for a while
Sent from my iPhone using Tapatalk
|
11-30-2020, 07:28 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
The tube on the right is what you have circled
Sent from my iPhone using Tapatalk
|
11-30-2020, 08:38 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
|
|
Played with my new toy. Rolled up some .223rem with BLC-2 and 69gr SMK’s.
it’s the white thingy in the middle. Pic is just for reference. That’s last night with some .357mag stuff.
|
11-30-2020, 10:42 PM
|
|
|
Join Date: May 2007
Posts: 16,287
|
|
Nice!
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
12-01-2020, 09:55 PM
|
|
|
|
Join Date: May 2007
Posts: 7,084
|
|
Added a couple more 8 lb. jugs of powder to the hoard. Annealed and full length resized, trimmed 50 old fired and reloaded I don't know how many times cases to use in a new rifle which I bought new cases for but am too cheap to use yet.
|
12-06-2020, 03:08 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
|
|
Sunday in the loading room...
I thought I would document what I did today. I shot a hundred and one .44mag cartridges yesterday. And today, I’ll reload them.
For time and space savings, I won’t show the first two steps. They were de-capping the cases (Kids...that’s when you remove the spent primers). And then into the wet tumbler for two hours. Then on the drying tray for another two hours.
Step 1. The cases need to be sized back to spec. After they fire, they expand. Here’s a picture of a fired case before full length sizing in a case gauge.
Full length sizing....
And the resulting resized case in the case guage for reference...
Step 2. Full length sizing stretches the case. So trimming to the proper length is next. In this instance, the case length should be approximately 1.2790”. It is very important to get all of your cases pretty close to the same length. This is because when you crimp the case, your crimping die can give a consistent crimp (without having to mess around adjusting the die for differing length cases).
Trimming step...
Step 3. Next the case neck needs to be flared open slightly to accept a bullet easily so you can seat it into the case. Here’s a picture after the neck on this case has been flared open.
|
12-07-2020, 09:17 AM
|
|
|
|
Join Date: Sep 2009
Location: The North
Posts: 1,326
|
|
Finally cleaned my bench.
Sent from my iPhone using Tapatalk
|
12-07-2020, 11:30 AM
|
|
|
Join Date: Sep 2014
Posts: 77
|
|
Well I've been picking away at getting my reloading area set up in my new place the past couple of weeks. In my last place I didn't have room for a proper setup and basically stored everything in 4 Rubbermaid totes and adapted my press and trimmer to clamp to whatever flat surface I could find to use as a temporary work bench. It worked, but was a pain in the arse at times! Now I have a 2ft deep x 5ft long bench with a galvanized sheet metal top where I'll permanently mount my press. Above this I have 3 Mastercraft cabinets which nicely hold all of my tools and components with some extra room for expansion down the road.
I'm looking for ideas on how and where to mount my RCBS case trimmer 2 so it's somewhat out of the way but still accessible. How have others addressed this?
|
12-10-2020, 11:12 AM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,457
|
|
Quote:
Originally Posted by psale63
Well I've been picking away at getting my reloading area set up in my new place the past couple of weeks. In my last place I didn't have room for a proper setup and basically stored everything in 4 Rubbermaid totes and adapted my press and trimmer to clamp to whatever flat surface I could find to use as a temporary work bench. It worked, but was a pain in the arse at times! Now I have a 2ft deep x 5ft long bench with a galvanized sheet metal top where I'll permanently mount my press. Above this I have 3 Mastercraft cabinets which nicely hold all of my tools and components with some extra room for expansion down the road.
I'm looking for ideas on how and where to mount my RCBS case trimmer 2 so it's somewhat out of the way but still accessible. How have others addressed this?
|
I mounted my trimmers, priming tools etc. onto a 12"x 6'x 1/2" pieces of scrap fencing lumber I had laying around. I store them in my roll away tool chest, when I need a tool I just C-clap them to the top of my work bench. Not fancy but it works and also doubles up the stiffness of the working surface by adding the extra layer of lumber to the reloading bench top.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
12-10-2020, 11:25 AM
|
|
|
|
Join Date: May 2007
Location: WMU 303
Posts: 8,539
|
|
I had 4 boxes of 12 ga steel BB shotshells that were hangin around that I had to disassemble into components. These shotshells would not cycle in my semi-auto shotgun because the diameter was too large for them to drop into the chamber. I did engage the manufacturer and they have since modified their process and sent me a case of shells for my trouble.
But it was time to dispose of these shells so I've been cutting off the tops, just below the crimp, with a box cutter, emptying out the shot, pulling out the wad and emptying the powder. So I've got a lot of steel BB shot and powder to find uses for.....told the wife I'll perform some firepit magic
|
12-11-2020, 09:11 AM
|
|
|
Join Date: Sep 2014
Posts: 77
|
|
Quote:
Originally Posted by 6.5 shooter
I mounted my trimmers, priming tools etc. onto a 12"x 6'x 1/2" pieces of scrap fencing lumber I had laying around. I store them in my roll away tool chest, when I need a tool I just C-clap them to the top of my work bench. Not fancy but it works and also doubles up the stiffness of the working surface by adding the extra layer of lumber to the reloading bench top.
|
Thanks 6.5 shooter, I'm thinking I'll stick with this same method. I currently have my trimmer mounted to a scrap section of 2x4 that I would c-clamp to a bench. I'll probably change that out for a fancy piece of scrap 3/4" hardboard or 1x4 I've got lying around to give a low profile look!
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:11 AM.
|