Spring setting tool

[Lights Out]

I’ve had some trouble with the machine screws bending on the red handled spring setters. Our new Signature Series springs from lights Out Snaring are a little more powerful then the screws can handle. I have had to replace the original machine screws with#12 x 1 1/2” long self tapping screws. Just remove original machine screws and replace with these, no drilling necessary. Makes them nicer to use for other springs too.

[spoiledsaskhunter]

i drilled out the holes in mine and put in bigger bolts......don't know if it will work better 'cause haven't used them since the alteration.

[Marty S]

I kinda do prefer to drill the holes a little larger prior to installing larger drill screws into the tool for the Supermagnum.

[HunterDave]

Are you guys serious? The bolts actually bend on those big springs?

The force on the Signature ones is 75 lbs. What is it for the Supermagnums?

[Marty S]

The bolts are capable of bending, but if youre reasonably careful the tool can do the job as is, i went all winter with a couple standard tools without trouble, but tgen demo-ing in our store i bent two in short order. Funny thing was i caught about half my coyotes in supermagnums last winter without bending a bolt.

But, using standard tool as is, you have to ensure the arms are aligned when compressing so the one arm had to be tight against the tool, like arm literally on the nut instead of the threaded portion.

Poundage.... dependant upon whos measuring poundage. Trappers do it a few different ways, science people have their own ways, and then spring manufacturers measure their way.

Poundages of both springs will be similar. One has very long arms compared to other.

[Lights Out]

That’s right Marty my Signature Series spring has longer arms and the wire size is bigger as well which increases the springs power.