Quick load help

[obsessed1]

If someone who has quick load would be willing to run a powder/ charge load for me I would be very grateful. I'm looking specifically at Hodgdon leverlution in the 22-250 using 55 gr bullets. Just looking for a place to start. Looking at burn rates and load density it should work.
Feel free to PM me thanks

[huntingfamily]

...

[catnthehat]

I can do that for you, just give me 2 minutes
Cat

[catnthehat]

Originally Posted by catnthehat

I can do that for you, just give me 2 minutes
Cat

Hmmm, can't find it in my Quickload, nor on the Hodgon site for the 22/250
Cat

[obsessed1]

Originally Posted by catnthehat

Hmmm, can't find it in my Quickload, nor on the Hodgon site for the 22/250
Cat

Theres no load development for it but lots of guys use it successfully in the 308. Its burn rate is very close to varget. I was thinking I might try it in the 22-250 as I can get it locally for 44$/lb. And have 5 lbs on my shelf already. Was hoping quick load would give a starting point.....thanks for looking Cat!

[birdseye]

Burn rate chart it is # 113,Vihtavouri 540 is #116,Varget is #108.sites between H380/Allisnt Pro 2000 mr,hope this helps some

[marky_mark]

Side note?
Does quick load work on a Mac?

[Ariu]

My QL v.3.8 does not have Hdg LVR powder.
GRT produces following results:

Caliber 	.22-250 Rem. 	
Max allowed pressure 58740 psi
Projectile 	 Hornady, SXSP 2260, 0.224, 55.00 grain 	
Propellant 	 Hodgdon LeverEvolution (2021-01-28) 	
Load steps 	39.00, 38.00, 37.00, 36.00  	
Seating Depth 	4.77 mm 	
Bullet length 	16.00 mm 	
Case volume 	2.9613 g H2O 	
L3/CL 	        1.9079 in 	
L6/OAL 	        2.3500 in
 
PeakPressure	39.00 grain	56832	psi
MuzzleVelocity	39.00 grain	3746.1	ft/s

PeakPressure	38.00 grain	52174	psi
MuzzleVelocity	38.00 grain	3652.8	ft/s

PeakPressure	37.00 grain	47852	psi
MuzzleVelocity	37.00 grain	3556	ft/s

PeakPressure	36.00 grain	43838	psi
MuzzleVelocity	36.00 grain	3455.7	ft/s

PeakPressure	35.00 grain	40111	psi
MuzzleVelocity	35.00 grain	3357.6	ft/s

[Dubious]

Originally Posted by marky_mark

Side note?
Does quick load work on a Mac?

Yes but you need to run it on a windows emulator. It’s less headache to just buy a real cheap laptop.

[obsessed1]

Originally Posted by Ariu

My QL v.3.8 does not have Hdg LVR powder.
GRT produces following results:

Caliber 	.22-250 Rem. 	
Max allowed pressure 58740 psi
Projectile 	 Hornady, SXSP 2260, 0.224, 55.00 grain 	
Propellant 	 Hodgdon LeverEvolution (2021-01-28) 	
Load steps 	39.00, 38.00, 37.00, 36.00  	
Seating Depth 	4.77 mm 	
Bullet length 	16.00 mm 	
Case volume 	2.9613 g H2O 	
L3/CL 	        1.9079 in 	
L6/OAL 	        2.3500 in
 
PeakPressure	39.00 grain	56832	psi
MuzzleVelocity	39.00 grain	3746.1	ft/s

PeakPressure	38.00 grain	52174	psi
MuzzleVelocity	38.00 grain	3652.8	ft/s

PeakPressure	37.00 grain	47852	psi
MuzzleVelocity	37.00 grain	3556	ft/s

PeakPressure	36.00 grain	43838	psi
MuzzleVelocity	36.00 grain	3455.7	ft/s

PeakPressure	35.00 grain	40111	psi
MuzzleVelocity	35.00 grain	3357.6	ft/s

Thank you very much!

[marky_mark]

Originally Posted by Dubious

Yes but you need to run it on a windows emulator. It’s less headache to just buy a real cheap laptop.

Good to know
Thanks