Go Back   Alberta Outdoorsmen Forum > Main Category > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-18-2018, 11:41 AM
coyotezh coyotezh is offline
 
Join Date: Sep 2011
Posts: 851
Default carry and transport outboard motor

I just bought a Tohatsu outboard motor from the boat & sportsmen show. It's a 6HP motor so will fit my inflatable perfectly I hope. My reason to buy a small motor is for the easiness for transportation.

I downloaded the manual from internet. To my surprise, the manual said I have to carry and transport the motor vertically. The manual also mentioned that I have to drain the gasoline and engine oil if I really want to laid down the motor into my car!! but still need to raise the motor head 2 to 4 inches in order to avoid leakage.

This is driving me crazy.... Hope someone can tell me this is a over shot

Thank you in advance! John
Reply With Quote
  #2  
Old 03-18-2018, 11:46 AM
oilngas oilngas is online now
 
Join Date: Dec 2008
Posts: 1,025
Default

I have no idea if I'm correct but I bet it's lawyer talk for if the fuel drains out n you start yourself on fire, well they told you so.
Reply With Quote
  #3  
Old 03-18-2018, 11:51 AM
javlin101 javlin101 is offline
 
Join Date: Aug 2009
Posts: 1,670
Default

If it is a 4 stroke it should be up right. The gas issue is self explanatory no!
Reply With Quote
  #4  
Old 03-18-2018, 12:03 PM
Ken07AOVette's Avatar
Ken07AOVette Ken07AOVette is offline
 
Join Date: Dec 2008
Location: Alberta
Posts: 24,071
Default

It shouldn't have oil in it new and you can transport them generally on the side tiller up depends on crankcase filler location
__________________
Only dead fish go with the flow. The rest use their brains in life.


Originally Posted by Twisted Canuck
I wasn't thinking far enough ahead for an outcome, I was ranting. By definition, a rant doesn't imply much forethought.....
Reply With Quote
  #5  
Old 03-18-2018, 12:14 PM
TimeOff's Avatar
TimeOff TimeOff is offline
 
Join Date: Jan 2014
Location: Yes
Posts: 721
Default

Usually can't lay down 4 strokes, the oil will migrate into the cylinders. They even recommend not leaving them tilted up on the boat when parked. Not an issue with 2 strokes.
Reply With Quote
  #6  
Old 03-18-2018, 12:23 PM
Tfng Tfng is offline
 
Join Date: Nov 2014
Posts: 2,046
Default

My 5hp Mercury can be laid down tiller down (shifter up). I carry it around for a spare and lay it down in the bow of the boat because I don't like how it clutters the back of the boat if I have it on the transom.

Isn't the Tohatsu a Mercury copy? Or is it a Yamaha copy?

Either way I was surprised to hear it can't be laid down. I'd look for more info on that.

Last edited by Tfng; 03-18-2018 at 12:33 PM.
Reply With Quote
  #7  
Old 03-18-2018, 12:37 PM
Dean2's Avatar
Dean2 Dean2 is online now
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,070
Default

Quote:
Originally Posted by TimeOff View Post
Usually can't lay down 4 strokes, the oil will migrate into the cylinders. They even recommend not leaving them tilted up on the boat when parked. Not an issue with 2 strokes.
Spot on!!

Perfect reason to stick to 2 strokes for smaller motors. Four strokes are heavy, and not nearly as convenient for back country packing, though they do run quiet and idle nice if they are in a permanent mount situation.
Reply With Quote
  #8  
Old 03-19-2018, 11:33 AM
Coiloil37's Avatar
Coiloil37 Coiloil37 is offline
 
Join Date: Aug 2009
Location: Oz
Posts: 2,124
Default

I’ve heard there’s an issue with the float in the carb if laid down on the wrong side but I haven’t chased up any real data on it. You haven’t got a sticker on your engine?

Reply With Quote
  #9  
Old 03-22-2018, 01:50 AM
hairycanary hairycanary is offline
 
Join Date: May 2007
Location: Okotoks
Posts: 177
Default

keep the carb on the up side
Reply With Quote
  #10  
Old 03-30-2018, 07:24 PM
coyotezh coyotezh is offline
 
Join Date: Sep 2011
Posts: 851
Default

Got my brand new Tohatsu 6HP....however, I realized today this new motor was sitting in the shop upside down for who knows how long when I went there to pick it up. I found it out by my name on the packing box today. Will I have any trouble with this motor? I know there is no engine oil but I guess the factory must tried the motor with engine oil before shipping out... what should I do? hopefully no harmful to my new motor...

A photo of my brand new motor:
Reply With Quote
  #11  
Old 03-30-2018, 09:37 PM
Battle Rat Battle Rat is offline
 
Join Date: Dec 2008
Posts: 2,617
Default

Had a Honda 4 stroke at one time.
I'm sure that it said right on it to lay it down only on one side.
Reply With Quote
  #12  
Old 03-30-2018, 09:50 PM
Daslogster's Avatar
Daslogster Daslogster is offline
 
Join Date: Jul 2008
Location: Airdrie
Posts: 251
Default 4 stroke

I have a honda 8 and there is a side you can kay it down on, case even has hard points for that purpose. This is my 3rd small outboard and there is always one side down, one up recommended.
Reply With Quote
  #13  
Old 03-30-2018, 10:02 PM
Dweb Dweb is offline
 
Join Date: Aug 2017
Location: Morinville
Posts: 699
Default

Quote:
Originally Posted by Battle Rat View Post
Had a Honda 4 stroke at one time.
I'm sure that it said right on it to lay it down only on one side.
Yes same with my 7.5 Honda twin
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:55 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.