Go Back   Alberta Outdoorsmen Forum > Main Category > Trapping Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 01-30-2023, 03:56 PM
NapperJD NapperJD is offline
 
Join Date: Mar 2017
Posts: 7
Default Faulty Power Rams?

Curious if anyone else has seen this happening and if share shop was decent about getting replacements?

4 brand new Rams out of a batch of 16 I bought this year have snapped in the coil without anything touching them other than cold weather.






Reply With Quote
  #2  
Old 01-31-2023, 01:26 PM
kingrat kingrat is offline
 
Join Date: May 2014
Location: prince albert
Posts: 1,682
Default

Seems to be fairly common now. Not sure about the snare shop but I know dam beaver here in sask was replacing all broken ones.
Reply With Quote
  #3  
Old 01-31-2023, 10:26 PM
TrapperMike TrapperMike is offline
 
Join Date: Feb 2013
Location: Alix
Posts: 870
Default

I still have a couple hundred of the original Rams made by Bruce and have had no problems. Iíve also gone through a number of the newer ones and have experienced some bad results, such as snapped off arms and uncoiled springs. I believe that is do to the use of inferred metal. Another problem with the new snares is the lap link used to attach the snare. In the beginning Bruce used a coil made of stiff wire that fit smoothly in place when setting the ram. These new lap links are bulky and have burrs that get hung up when setting the ram. Because of the the link will jump in or out of place when setting the ram causing it to misfire causing some close calls and the odd injury. Both of these problems can be fixed but probably wonít because it would cost a few pennies more. Until then we will have to deal with broken rams and hurt trappers.

When I look at my old reliable ram a saying comes to mind.
If itís not broken donít fix it.
Reply With Quote
  #4  
Old 02-01-2023, 09:08 AM
Big Grey Wolf Big Grey Wolf is offline
 
Join Date: Sep 2012
Posts: 5,807
Default

Mentioned it before. I did some technology work with Alta Steel. We found that recycle steel made from old car bodies ended up with steel billets with mixture of contaminate metals other than iron in the core. Very poor quality products like truck springs, imagine other products would suffer same failure rate.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:32 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.