300wsm info please

ling man · #1 08-09-2009, 01:26 PM

i shoot a 300wsm i want to try 168tsx with rl19,any body know how much powder i should use,i can not find load datta anywhere thanks.

Donny Bear · #2 08-09-2009, 05:01 PM

The Rifle Section @ www.reloadersnest.com

Keep in mind this is not the gospel watch the loads as recomended

I do a lot of 300wsm and won't say the RL 19 or RL 22 wont work but I have better success with H 4831SC or 4350 than the RLs

vic1 · #3 08-09-2009, 05:27 PM

My T3 300WSM shoots 1" group @ 200 yards with molly coated 168TSX -R19 - 70gr. The same with 180TSX- R19-68gr. The loads are max according to Lee manual although with molly coating; the pressure is slightly reduced.
Vic

Donny Bear · #4 08-09-2009, 06:09 PM

Like I said doesn't work for me but if this is a factual load it is well under the .5 so worth a try

LoadID 10477
Bullet Hornady InterBond
BulletWeight 165 grs
Powder Alliant Reloader 19
PowderWeight 70.5 grs
Primer Federal 210 Match
Brass Make Winchester
Barrel Length 28 (inches)
C.O.L 2.869 (inches)
Velocity 3107 fps
Group 0.203 (inches by 3 shot at 100 yds)

Note this is a sample from the Reloaders bench and is not confirmed consult a manual and always start with lower charges to be safe