tikka 270 barnes triple shock recipes

bighornram · #1 06-19-2019, 07:09 AM

was wondering if anyone is hand loading barnes triple shock 130 grain for the 270.Any help be appreciated.

Pathfinder76 · #2 06-19-2019, 07:42 AM

57-60 gr of H4831. The end.

Salavee · #3 06-19-2019, 09:45 AM

Quote:

Originally Posted by chuck

57-60 gr of H4831. The end.

Suggest you try a more efficient powder .. like Ramshot Hunter or H-100 V

MooseRiverTrapper · #4 06-19-2019, 10:00 AM

Use the 110 with R17.

Curly Bill · #5 06-21-2019, 10:08 AM

Quote:

Originally Posted by MooseRiverTrapper

Use the 110 with R17.

270 load data.

Sell 270, buy 28 Nosler, buy better BC bullets, load better BC bullets, shoot better BC bullets.

Dick284 · #6 06-21-2019, 10:26 AM

Load with a powder that has a burn rate between 4350 and 7828, and find a good load in your rifle.

FWIW, the old H450 was the bestest powder I ever tried in a .270Win.

Pathfinder76 · #7 06-19-2019, 10:06 AM

Quote:

Originally Posted by Salavee

Suggest you try a more efficient powder .. like Ramshot Hunter or H-100 V

Oh, I have. You couldn’t give me any more 100v and good luck finding Ramshot Hunter.

But, the OP can experiment to his hearts content. But I know where I would start.

Deer Hunter · #8 06-19-2019, 10:14 AM

One of the 4350's is what I'd load with a 130 gr bullet.

Salavee · #9 06-19-2019, 10:33 AM

Quote:

Originally Posted by chuck

Oh, I have. You couldn’t give me any more 100v and good luck finding Ramshot Hunter.

But, the OP can experiment to his hearts content. But I know where I would start.

Those were only suggestions for the OP Chuck. Not intended to upset you. RL 17 would would also be a good choice with that bullet. Just about anything but H4831 unless you like compressed loads and unburnt powder. IMHO

Pathfinder76 · #10 06-19-2019, 10:49 AM

Unburned powder?