|
03-17-2019, 09:39 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Tikka T3 Magazine Problem
I have a Tikka 223 varmint and the mag does not feed reliably. It takes 5 rounds but often the 2nd or 3rd round become slightly pushed forward by the round above it being chambered. Then when the bolt comes all the way back and you go to chamber the next round it slides over top the slightly forward round. Has anyone else experienced this or something similar?
Also while we are on the topic of tikka mags, are there options in Canada for mag upgrades? Something that would allow longer COAL? Perhaps somehow modify the factory mag?
Thanks for any insight on these issues.
|
03-17-2019, 10:05 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
The Waters magazines are aluminum, and feed much more reliably, but they are expensive.
__________________
Only accurate guns are interesting.
|
03-17-2019, 10:26 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Waters
Quote:
Originally Posted by elkhunter11
The Waters magazines are aluminum, and feed much more reliably, but they are expensive.
|
Im interested. Where would these be available?
|
03-17-2019, 10:46 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
The Waters magazines are available online. They are made in Australia.
__________________
Only accurate guns are interesting.
|
03-18-2019, 06:12 AM
|
|
|
|
Join Date: Nov 2008
Posts: 11,357
|
|
Quote:
Originally Posted by bpk1982
I have a Tikka 223 varmint and the mag does not feed reliably. It takes 5 rounds but often the 2nd or 3rd round become slightly pushed forward by the round above it being chambered. Then when the bolt comes all the way back and you go to chamber the next round it slides over top the slightly forward round. Has anyone else experienced this or something similar?
Also while we are on the topic of tikka mags, are there options in Canada for mag upgrades? Something that would allow longer COAL? Perhaps somehow modify the factory mag?
Thanks for any insight on these issues.
|
https://www.24hourcampfire.com/ubbth...Magazine_Modif
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Thomas Sowell
|
03-18-2019, 06:28 AM
|
|
|
|
Join Date: Dec 2012
Posts: 1,651
|
|
I had the same problem with an aftermarket magazine from Mountain Tactical. I took a little tension out of the spring and it worked fine.
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|
03-18-2019, 07:36 AM
|
|
|
Join Date: May 2007
Posts: 15,836
|
|
I have all three above mentioned 223 magazines and the new generation Mountain Tactical are my favourite (the first generation sucked). Modifying the existing one will create a headache and if you are not shooting the heavies I’d call stoeger for a factory replacement.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
03-18-2019, 12:27 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Stoeger
Quote:
Originally Posted by chuck
I have all three above mentioned 223 magazines and the new generation Mountain Tactical are my favourite (the first generation sucked). Modifying the existing one will create a headache and if you are not shooting the heavies I’d call stoeger for a factory replacement.
|
I was in contact with stoeger and because the rifle is out of warranty they were noncommittal on what they would be willing to do. He did say I could sent it to them. Perhaps I will and see if they will do anything. I saw the mountain tactical mag online but they are out of stock and unsure when they will make more.
Thanks for the info so far guys.
|
03-18-2019, 02:19 PM
|
|
|
Join Date: Jun 2013
Posts: 1,423
|
|
Worse in cold weather
|
03-18-2019, 03:36 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
There are also multiple generations of the Waters magazines, the recent versions, are improved, and work flawlessly.
__________________
Only accurate guns are interesting.
|
03-18-2019, 07:59 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Waters mag
Quote:
Originally Posted by elkhunter11
There are also multiple generations of the Waters magazines, the recent versions, are improved, and work flawlessly.
|
Did you order directly from http://www.watersrifleman.com?
How long did it take to recieve from Australia? Ok to go through canada customs? Thx
|
03-18-2019, 08:06 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
Quote:
Originally Posted by bpk1982
|
I ordered direct, and it took a couple of weeks. No issues with customs.
__________________
Only accurate guns are interesting.
|
03-19-2019, 02:04 PM
|
|
|
Join Date: Aug 2008
Location: Leslieville
Posts: 2,500
|
|
Mountain Tactical are $70 usd, Waters are $170 Aus dollars.
__________________
We talk so much about leaving a better planet to our kids, that we forget to leave better kids to our planet.
Gerry Burnie
|
03-20-2019, 09:12 AM
|
|
|
Join Date: Sep 2018
Posts: 49
|
|
I have the exact same rifle with 3 factory mags. Never had an issue with any of them. If you want to try them out in your rifle to be certain its a mag issue let me know. I am in Calgary also.
|
03-20-2019, 04:47 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Tikka
Quote:
Originally Posted by yz295
I have the exact same rifle with 3 factory mags. Never had an issue with any of them. If you want to try them out in your rifle to be certain its a mag issue let me know. I am in Calgary also.
|
I appreciate the offer. I will PM you tonight.
|
03-22-2019, 11:18 PM
|
|
|
Join Date: May 2015
Location: Lacombe, AB
Posts: 484
|
|
I had 2 of the factory mags wear out on me. And that’s what they did when they were worn out is they wouldn’t feed reliably. What happens is the lips that hold the cartridge in the mag wear and the bullet end of the cartridge ends up tilting up a lot higher than it should. Which makes the other end tilt down so it won’t contact the bolt anymore.
I bought one from waters in Aus and it works flawlessly. About 2 weeks from when you send him the money it lands here, no border hassles either. I got the 9 shot version, and it’s got all kinds of room for you to play with your coal too. Mines a 204R which I believe is the same mag as your 223.
|
03-23-2019, 10:16 PM
|
|
|
Join Date: May 2007
Posts: 293
|
|
I bought an aluminum 10 round from Red Star or something like that in Calgary. The box is just labelled ‘T3 mag’. I guess that’s the company.
|
03-24-2019, 09:10 AM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Waters
Quote:
Originally Posted by aardvaark
I had 2 of the factory mags wear out on me. And that’s what they did when they were worn out is they wouldn’t feed reliably. What happens is the lips that hold the cartridge in the mag wear and the bullet end of the cartridge ends up tilting up a lot higher than it should. Which makes the other end tilt down so it won’t contact the bolt anymore.
I bought one from waters in Aus and it works flawlessly. About 2 weeks from when you send him the money it lands here, no border hassles either. I got the 9 shot version, and it’s got all kinds of room for you to play with your coal too. Mines a 204R which I believe is the same mag as your 223.
|
It sounds like this is the mag to get. Thanks for the review.
|
03-24-2019, 09:12 AM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Red star
Quote:
Originally Posted by Kev
I bought an aluminum 10 round from Red Star or something like that in Calgary. The box is just labelled ‘T3 mag’. I guess that’s the company.
|
More details please. I dont see it on their website. You went into a store or mail ordered? How does the mag perform? Seat bullets longer?
|
04-03-2019, 07:49 PM
|
|
|
Join Date: Aug 2008
Location: Leslieville
Posts: 2,500
|
|
I had .223 on the brain after reading this thread and ordered a .223 mag for my 22-250 from Mountain Tactical. I now have a .223 mag for sale at a good price if anyone still needs one.
__________________
We talk so much about leaving a better planet to our kids, that we forget to leave better kids to our planet.
Gerry Burnie
|
04-09-2019, 08:51 PM
|
|
|
Join Date: Mar 2016
Location: Calgary
Posts: 23
|
|
I've had my Tikka T3 magazine jam on me several times.
Once with a large black bear approaching.
Never again will I buy an aftermarket magazine.
__________________
Be kind to one another
|
04-09-2019, 10:02 PM
|
|
|
|
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
|
|
Oh no
Quote:
Originally Posted by KevDawg
I've had my Tikka T3 magazine jam on me several times.
Once with a large black bear approaching.
Never again will I buy an aftermarket magazine.
|
That's not good! Have you had the factory mag jam? Or just a aftermarket?
|
04-10-2019, 10:18 PM
|
|
|
|
Join Date: Feb 2013
Posts: 1,850
|
|
My tikka 5 round 223 mag doesn’t work well it jams up. The 3 round works ok. I looked at waters sight they have a magazine for 6br so you could have a t3 repeater in 6br that would be cool
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:58 AM.
|