|
09-04-2011, 09:17 AM
|
|
|
Join Date: Aug 2011
Location: Edmonton
Posts: 28
|
|
Can I add weight to small spinners?
I went fishing on the NSR and tried using a couple of small spinners and spoons (one was #3 red-and-gold Mepps). My problem is that I can't cast them as far as I would want because it has very little weight. Most of the time I can only get them as far as 25-30 ft or so, but I've seen people casting their lure almost a third of the NSR width. As the NSR is pretty shallow at 25-30 ft from the shore (I was fishing downstream of the Devon bridge), I don't think I can have much luck unless I cast farther.
Here comes the question: can I add a few splitshots close to small spinners, plugs and spoons so I cast them farther from the shore? Is it going to affect their action? Or are they even meant to be cast farther than 25-30 ft?
Thanks!
|
09-04-2011, 09:54 AM
|
|
|
|
Join Date: Apr 2011
Location: Edmonton, AB
Posts: 175
|
|
I think your best bet would be to rig the mepps with a walking sinker and a bead attached to a swivel, than add 1-2' of fluorocarbon to tie this directly to your mepps. This has worked great for me in the past in adding weight to nearly any bait without compromising the action.
WalkingSinker2.gif
The only thing missing from this picture is the bead. Put a small bead between to sinker and the swivel, it helps prevent the weight from damaging the knot. Also keep in mind the longer the leader from the swivel to the bait the harder it will be to cast.
|
09-04-2011, 12:49 PM
|
|
|
Join Date: Aug 2011
Location: Edmonton
Posts: 28
|
|
Thanks, JohnnyD, I''ll definitely try this. What sinker weight do you use? Would 3/4 oz be enough?
|
09-04-2011, 12:55 PM
|
|
|
Join Date: Mar 2010
Location: Central Alberta
Posts: 4,306
|
|
Quote:
Originally Posted by Big_Russky
Thanks, JohnnyD, I''ll definitely try this. What sinker weight do you use? Would 3/4 oz be enough?
|
3/4 oz is pretty heavey
|
09-04-2011, 01:22 PM
|
|
|
|
Join Date: Mar 2009
Location: Medicine Hat
Posts: 3,216
|
|
Quote:
Originally Posted by JohnnyD
I think your best bet would be to rig the mepps with a walking sinker and a bead attached to a swivel, than add 1-2' of fluorocarbon to tie this directly to your mepps. This has worked great for me in the past in adding weight to nearly any bait without compromising the action.
Attachment 39275
The only thing missing from this picture is the bead. Put a small bead between to sinker and the swivel, it helps prevent the weight from damaging the knot. Also keep in mind the longer the leader from the swivel to the bait the harder it will be to cast.
|
Any small egg sinker will accomplish the same thing as well. You will get distance without compromising the action of the lure.
__________________
Participating in a gun buy back program because you think that criminals have too many guns is like having yourself castrated because you think your neighbors have too many kids...
|
09-04-2011, 01:22 PM
|
|
|
|
Join Date: Apr 2011
Location: Edmonton, AB
Posts: 175
|
|
Quote:
Originally Posted by Big_Russky
Thanks, JohnnyD, I''ll definitely try this. What sinker weight do you use? Would 3/4 oz be enough?
|
I'd start with 1/8 or 1/4 ounce, just enough to give you some extra casting distance.
|
09-04-2011, 01:33 PM
|
|
|
|
Join Date: Sep 2010
Location: Camrose
Posts: 2,359
|
|
One of my favorites for rivers is a 3/8 oz brown trout panther martin. Not really much bigger than the smaller versions, but that weight really helps get the extra casting distance. I've tried the split shot and just don't like it.
|
09-04-2011, 01:35 PM
|
|
|
Join Date: Jul 2007
Posts: 465
|
|
Lighter line may also help. If you are trying to cast spinners with line heavier than 10 Lb. test it can be tough to get distance. 8Lb test or lighter for spinner casting IMO. also be sure to have a full spool of line, this helps too.
M
|
09-04-2011, 01:55 PM
|
Banned
|
|
Join Date: Jan 2011
Posts: 4,090
|
|
Quote:
Originally Posted by clarki
Lighter line may also help. If you are trying to cast spinners with line heavier than 10 Lb. test it can be tough to get distance. 8Lb test or lighter for spinner casting IMO. also be sure to have a full spool of line, this helps too.
M
|
Times Ten...
Also, I find fighting fish on lighter line/tackle is much more exciting, because you can feel the fish better, and he has fairer chance of getting away. (too much excitement for some people!)
Last edited by drhu22; 09-04-2011 at 02:15 PM.
|
09-04-2011, 02:21 PM
|
|
|
Join Date: Aug 2011
Location: Edmonton
Posts: 28
|
|
Quote:
Originally Posted by clarki
Lighter line may also help. If you are trying to cast spinners with line heavier than 10 Lb. test it can be tough to get distance. 8Lb test or lighter for spinner casting IMO. also be sure to have a full spool of line, this helps too.
M
|
I use 10 lb test line for fishing in the NSR. I switched to it from the 6 lb line I had used for lake trout fishing. Just thought 6 lb might not do it if a pike hits my lure or if I hit a snag in the river.
|
09-04-2011, 04:28 PM
|
Banned
|
|
Join Date: Oct 2010
Location: Edmonton
Posts: 4,018
|
|
Just add a couple splits 18" to 2 ft up the line putting them close will interfere with the action
|
09-04-2011, 05:24 PM
|
|
|
Join Date: Jul 2007
Posts: 465
|
|
I think 6Lb is much stronger than most people give it credit for. Fluorocarbon tippet material may help you with the toothy critters if you decide to go with lighter line.
M
|
09-04-2011, 05:56 PM
|
|
|
Join Date: Feb 2011
Location: Provost, Ab
Posts: 145
|
|
i was just using a big split shot about 16" up. works great for me....
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:00 AM.
|