|
02-18-2020, 01:01 PM
|
|
|
|
Join Date: Dec 2009
Posts: 232
|
|
270 hand-loads
Hey guys don't know much about re-loading,but I picked up a beauty of an older Husqvarna 270 from a work buddy.
He included a bunch of hand-loads,problem is that when using this ammo the bolt is tough to close down.Store bought ammo works just fine.
Question is do you think its safe to fire them ? Not planning to use them in field just at the range.
|
02-18-2020, 01:12 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,263
|
|
I don't use any handloads that I didn't load myself, but it sounds like his sizing die wasn't adjusted properly. If he can't even adjust a sizing die properly, who knows what else he messed up.
__________________
Only accurate guns are interesting.
|
02-18-2020, 01:14 PM
|
|
|
|
Join Date: Dec 2012
Location: AB
Posts: 818
|
|
Could be a number of things causing resistance closing the bolt with the hand loads. He may have been neck sizing and the shoulders need a bump. Web expansion. Primers sitting proud. The list goes on.
Myself, I still make some mistakes when loading that require correction. Chances are the same happens to others at times. I can address my own but I don’t have a clue where their error may have been should they have had one. I just pull bullets, dump powder and start fresh on my own. That’d be my recommendation to anyone but ultimately, it’s your call.
|
02-18-2020, 01:17 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,153
|
|
Quote:
Originally Posted by elkhunter11
I don't use any handloads that I didn't load myself, but it sounds like his sizing die wasn't adjusted properly. If he can't even adjust a sizing die properly, who knows what else he messed up.
|
Spot on. Never shoot hand loads made by someone you don't know. Like Elk said, badly adjusted sizing die, what else did he get wrong. Either toss them or pull them apart and rebuild them yourself so you are darn sure you know they were put together right.
|
02-18-2020, 02:39 PM
|
|
|
|
Join Date: Dec 2012
Location: At the end of the Thirsty Beaver Trail, Pinsky lake, Alberta.
Posts: 24,664
|
|
I wouldn't use them....ya never know what will happen...save yourself a catastrophic incident.
__________________
Be careful when you follow the masses, sometimes the "M" is silent...
|
02-18-2020, 02:59 PM
|
Shooting Xs
|
|
Join Date: Sep 2009
Location: Medicine Hat
Posts: 836
|
|
If the Range has a sealed can for disposal of loaded ammo I would deposit them there on your next Range trip.What you're describing sounds like incorrect sizing,not worth the risk IMO.
|
02-18-2020, 04:19 PM
|
|
|
|
Join Date: Dec 2009
Posts: 232
|
|
done deal
Thanx Guys ,will safely dispose of them
|
02-18-2020, 04:21 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,153
|
|
Quote:
Originally Posted by walleye guy
Thanx Guys ,will safely dispose of them
|
If there is anyone near u that reloads giveve them to him. He can pull them down and recover bullets and brass.
|
09-27-2020, 11:13 AM
|
|
|
|
Join Date: Dec 2009
Posts: 232
|
|
243 & 270 ammo
So as talked about in this thread earlier, I have some highly questionable ammo loaded by someone other than myself, that I feed is UNSAFE to use. At least 200 rounds of 270 & 243 combined.
I live N.E of Edmonton and if someone who lives nearby and reloads wants them to disassemble and use whatever pieces they can,
PM me. But you must ensure me that you will take them apart and not fire them as is.
We will work something out
|
09-27-2020, 11:38 AM
|
|
|
|
Join Date: Feb 2010
Location: Sturgeon County, Ab.
Posts: 3,132
|
|
If you have a press and can use the components, I’ll lend you a bullet puller?
__________________
Proper placement and Deep penetration are what’s important. Just like they taught in Sex Ed!
|
09-27-2020, 03:11 PM
|
|
|
|
Join Date: Dec 2009
Posts: 232
|
|
it's gone
thanks to all the members for their advise and offers to help.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:23 AM.
|