 |
02-19-2012, 07:54 PM
|
|
|
|
Join Date: Feb 2012
Location: Red deer AB
Posts: 356
|
|
Your opinion on electric powder scales
Ive heard theyre really sensitive to heat so im hesitant to get one
|
02-19-2012, 08:06 PM
|
|
|
|
Join Date: Mar 2008
Location: grew up in Alberta moved to SK, sure miss Alberta
Posts: 2,332
|
|
Quote:
Originally Posted by Submoa_hunter
Ive heard they're really sensitive to heat so i'm hesitant to get one
|
what kind of heat are you referring to??? I don't understand yer statement
normal temperatures where you reload should not present a problem, i,d more concerned about powder ignition and heat before i,d be concerned about the electronic scale going weird around heat
|
02-19-2012, 08:06 PM
|
|
|
|
Join Date: Aug 2008
Posts: 57
|
|
Lyman
Quote:
Originally Posted by Submoa_hunter
Ive heard theyre really sensitive to heat so im hesitant to get one
|
I just picked up a Lyman electronic powder measure/scale. I am completely impressed with it. It is very accurate and speeds up the process significantly. This is a precision instrument and if you treat it as such, it should perform for you. I made a separate shelf for mine so that it is not subject to any vibrations or movement from my reloading bench. I also levelled the shelf. Let it warm up as suggested for a half hour prior to use. I randomly checked loads it put out with my balance beam and they were all very consistent and accurate. I've been reloading for years and am kicking my butt for waiting so long to pick one of these babies up. The Lyman has an auto repeat function that starts each progressive load as soon as you return the powder tray onto the scale. If you are concerned about heat, don't set it up where it will be subject to any excessive heat.
|
02-19-2012, 08:23 PM
|
|
|
|
Join Date: May 2007
Location: Edmonton
Posts: 1,157
|
|
been using a lyman electric scale/dump since september and i won't ever use anything else
|
02-19-2012, 09:04 PM
|
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,535
|
|
My RCBS is the first electronic scale sold by RCBS, and it has been very consistent over the years. I find it much quicker than a beam scale, and just as accurate.
__________________
Only accurate guns are interesting.
|
02-19-2012, 11:22 PM
|
|
|
|
Join Date: Jun 2008
Location: Calgary Area
Posts: 2,489
|
|
X2
Quote:
Originally Posted by Rayzor
I just picked up a Lyman electronic powder measure/scale. I am completely impressed with it. It is very accurate and speeds up the process significantly. This is a precision instrument and if you treat it as such, it should perform for you. I made a separate shelf for mine so that it is not subject to any vibrations or movement from my reloading bench. I also levelled the shelf. Let it warm up as suggested for a half hour prior to use. I randomly checked loads it put out with my balance beam and they were all very consistent and accurate. I've been reloading for years and am kicking my butt for waiting so long to pick one of these babies up. The Lyman has an auto repeat function that starts each progressive load as soon as you return the powder tray onto the scale. If you are concerned about heat, don't set it up where it will be subject to any excessive heat.
|
X2
Couldnt agree more, my only regret is that I didnt buy one as soon as i started loading. RCBS Chargemaster is supposed to be excellent as well
|
02-20-2012, 10:02 AM
|
|
|
|
Join Date: Feb 2012
Location: Red deer AB
Posts: 356
|
|
Sorry tempature was a better word to use than heat. And i definetely am wanting to get one its so tedious doing it the traditional way
|
02-20-2012, 09:15 PM
|
|
|
|
Join Date: Dec 2010
Location: Spruce grove
Posts: 26
|
|
had troubles
I have the lyman 1000xp and it's terrible. just breathing near it sets it off.
I can't even repeat 5 loads consistently. it makes it pointless to even work up a magic batch for my rifle as I have no way of knowing that it will be the same if i make another batch in a different part of the year.
Could be a bad scale. Talked to lyman and they said to send it in and they would see if its the scale or not.
I hate it. I've been wanting to load for months now, but it's a complete waste of time until this gets sorted out. At least with a beam scale it will always be consistent cause as ambient pressure changes, the scale will change with it because it's mechanical not digital.
But I would love a digital scale that works.....
|
02-20-2012, 10:28 PM
|
|
|
|
Join Date: May 2007
Location: Edmonton
Posts: 1,157
|
|
how often do you test and calibrate your beam scales? they can go out of calibration just as easily as any other scale out there
|
02-20-2012, 10:31 PM
|
 |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,997
|
|
Quote:
Originally Posted by 7 REM MAG
how often do you test and calibrate your beam scales? they can go out of calibration just as easily as any other scale out there
|
That is why they come with test weights.
Mine have never gone out unless they got moved to a different spot that was not level, then it was a simple matter of turning the screw.....
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't! 
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:40 PM.
|
Linear Mode
