Best place in Edmonton to repair hydraulic cylinders?

[ken1989]

Need to redo a couple hydraulic cylinders on a front end loader. Who does it for reasonable cost and a fast turnaround in the Edmonton area? Thanks.

[Kim473]

If you just need new seals. It's not hard to replace them. Fluid seal can probably be your source for seal kits. Most cylinder heads either bolt on or screw on. A torque wrench for the piston nut.
May even find new cylinders at princess auto cheaper than resealing. Depending on how big cyl you need and how hard you need them to work. Princess auto ones are cheaply made but can be a replacement.

It's gonna be hard to find someone cheap and a fast turn around to rework the old ones.

[MartyM]

Cylinder Exchange on the west side of the city, 15919 - 121A Ave, phone: 780-452-5030. Wayne or Nick will be very helpful.

[ghfalls]

Control flow by mayfield is great.

[Moo Snukkle]

X2 on Cylinder Exchange

[HyperMOA]

Gir-Del

[pa_of_6]

2x on gir-del
but they aint cheap!!

Sometimes get what you pay for!

[retten]

Originally Posted by ken1989

Need to redo a couple hydraulic cylinders on a front end loader. Who does it for reasonable cost and a fast turnaround in the Edmonton area? Thanks.

Great work,

The bitterness of poor quality remains long after the sweetness of low price is forgotten