|
10-13-2020, 03:34 PM
|
|
|
Join Date: Jul 2017
Posts: 1,425
|
|
Processing waterfowl. Turning the corner
Daughter and I are avid waterfowlers, and faithfully practice ‘eat what you shoot’. But as many of you know, that can be a chore, chewing through goose breast for a year. We typically meet up with our group at the cabin in Saskatchewan, have a couple of weeks of sheer joy, spotting and shooting, often with substantial number of birds hitting the freezer. Then it’s a mad dash to get home with coolers of meat(with wing attached). Some of us travelling afar. We decided to investigate an alternate strategy, which I want to share, for your consideration.
In general, the plan was to can the meat every other day as the birds came in. Once canned, the meat no longer requires refrigeration. To serve legal transportation requirements, the cans are identified and a corresponding ledger documents the contents. It played out a bit differently for us, but the objective was met, and we are thrilled.
Months ago, the stores were filled with ‘mason jars’. As we hadn’t purchased a pressure cooker, I decided to wait until we had to determine jar size. We finally purchased an 8 quart pressure cooker on way to the cabin for $50. Upon measuring we determined a 500ml jar would work. To our dismay, we discovered a national shortage of mason jars. As the freezer was filling, our search expanded, but so was the shortage. After two weeks of hunting, the freezer filling, and no jars, we identified a source in Red Deer, and had a relative make an emergency purchase and delivery. Then for two days of continuous processing, we were able to can the lot.
Being our first time using this method, we wanted to keep it simple. No spicing or flavouring, until we could evaluate the results. We breasted all birds and used legs and thighs. As we had to freeze till we resolved the jar issue, we started off by filling the bath tub with bagged meat to thaw. We rinsed, pat dry, and seared each piece in hot oil (4 fry pans running together). We then deboned the larger legs, thighs( some big honks out there). After rinsing 12 doz jars, we added a sprinkle of steak spice to each and packed. Surprising how much meat fits. Bones take up a lot of room and are better removed. Initially we half filled with water, but discovered that was a mistake, and ended up filling with just 1/4 with water (after packing). Into the cooker for 1 hour. 1/2 hour cool down, then reload next batch, 6 jars at a time. We ran in shifts to get it all done. We tried hastening the cool down but that resulted in jars not sealing.
The resulting product is surprising, especially for those, like us, who find it a bit of a chore to eat waterfowl. The meat texture is that of pulled pork. It is the typical goose dry, but shreds easily. I won’t say it tastes like beef, but with a bit of flavouring, it can be pushed toward beef, or pork, or most any meat. At any sitting, I can get through a half breast of traditional roast goose. With this, I can enjoy two full breast easily. A truly unexpected benefit. If it wasn’t for a time commitment, we would stay and continue enjoying our shoot, based on this discovery.
We now plan on trying different meats, maybe some broth, spices, etc to perfect. We’ll also shop for a larger cooker to utilize 1 Ltr jars for efficiency. I’ll add to the post as we continue exploring this method.
__________________
I get all the news I need in the weather report
|
10-13-2020, 05:28 PM
|
|
|
|
Join Date: Apr 2009
Location: Alberta for the most part
Posts: 2,811
|
|
Thanks for the read, on your canning, I have a few jars here that you can have Im sure there is 6 not sure the size of the jars, but they are all the same, but you can come and get them in the Camrose area if you wish, Nimrod
|
10-13-2020, 05:37 PM
|
|
Moderator
|
|
Join Date: Jul 2008
Location: A bit North o' Center...
Posts: 11,163
|
|
That is really cool. Sounds like your hard work is well rewarded!
|
10-13-2020, 07:16 PM
|
|
|
Join Date: Jul 2007
Posts: 6,699
|
|
Quote:
Originally Posted by MyAlberta
Daughter and I are avid waterfowlers, and faithfully practice ‘eat what you shoot’. But as many of you know, that can be a chore, chewing through goose breast for a year. We typically meet up with our group at the cabin in Saskatchewan, have a couple of weeks of sheer joy, spotting and shooting, often with substantial number of birds hitting the freezer. Then it’s a mad dash to get home with coolers of meat(with wing attached). Some of us travelling afar. We decided to investigate an alternate strategy, which I want to share, for your consideration.
In general, the plan was to can the meat every other day as the birds came in. Once canned, the meat no longer requires refrigeration. To serve legal transportation requirements, the cans are identified and a corresponding ledger documents the contents. It played out a bit differently for us, but the objective was met, and we are thrilled.
Months ago, the stores were filled with ‘mason jars’. As we hadn’t purchased a pressure cooker, I decided to wait until we had to determine jar size. We finally purchased an 8 quart pressure cooker on way to the cabin for $50. Upon measuring we determined a 500ml jar would work. To our dismay, we discovered a national shortage of mason jars. As the freezer was filling, our search expanded, but so was the shortage. After two weeks of hunting, the freezer filling, and no jars, we identified a source in Red Deer, and had a relative make an emergency purchase and delivery. Then for two days of continuous processing, we were able to can the lot.
Being our first time using this method, we wanted to keep it simple. No spicing or flavouring, until we could evaluate the results. We breasted all birds and used legs and thighs. As we had to freeze till we resolved the jar issue, we started off by filling the bath tub with bagged meat to thaw. We rinsed, pat dry, and seared each piece in hot oil (4 fry pans running together). We then deboned the larger legs, thighs( some big honks out there). After rinsing 12 doz jars, we added a sprinkle of steak spice to each and packed. Surprising how much meat fits. Bones take up a lot of room and are better removed. Initially we half filled with water, but discovered that was a mistake, and ended up filling with just 1/4 with water (after packing). Into the cooker for 1 hour. 1/2 hour cool down, then reload next batch, 6 jars at a time. We ran in shifts to get it all done. We tried hastening the cool down but that resulted in jars not sealing.
The resulting product is surprising, especially for those, like us, who find it a bit of a chore to eat waterfowl. The meat texture is that of pulled pork. It is the typical goose dry, but shreds easily. I won’t say it tastes like beef, but with a bit of flavouring, it can be pushed toward beef, or pork, or most any meat. At any sitting, I can get through a half breast of traditional roast goose. With this, I can enjoy two full breast easily. A truly unexpected benefit. If it wasn’t for a time commitment, we would stay and continue enjoying our shoot, based on this discovery.
We now plan on trying different meats, maybe some broth, spices, etc to perfect. We’ll also shop for a larger cooker to utilize 1 Ltr jars for efficiency. I’ll add to the post as we continue exploring this method.
|
Canned meat is great! You can cook it raw in the jar, it’s way more juicy.
Add the required amount of salt, no water added and process the required amount of time at the correct pressure.
Check the bernardin website for the most up to date information on the processing.
|
10-14-2020, 10:03 AM
|
|
|
Join Date: Dec 2008
Location: Edmonton
Posts: 255
|
|
Something to try...
I have 2 kids and they love goose but it is all in how you prepare it. Here is a recipe that is a favorite at our house that I figured I would pass along to add to your enjoyment of goose hunting.
1. Take goose breast and cut into thin fillets (sharp knife is best). You should get at least 4 out of a large breast. We generally do 2 breasts at a time (1 bird).
2. Lay your fillet in between plastic wrap and pound out to help tenderize the meat. The wife has a fancy little mallet / tenderizer but any pounding device should work.
3. Once done, salt the breast on both sides. Goose meats likes a lot of salt but that is a personal preference.
4. Cover in flour, then dip into an egg / mike wash, then coat in Italian Bread crumbs / Panako / or whatever you like.
5. In your pan have 1/4 inch of hot oil, lay in coated breast and cook for 2-4 mins (until golden brown) then flip and do other side. Only flip once.
6. Serve with a homemade pickle / relish with whatever side you like.
7. ENJOY!!!
|
10-14-2020, 10:08 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,470
|
|
Quote:
Originally Posted by NFTrapper
I have 2 kids and they love goose but it is all in how you prepare it. Here is a recipe that is a favorite at our house that I figured I would pass along to add to your enjoyment of goose hunting.
1. Take goose breast and cut into thin fillets (sharp knife is best). You should get at least 4 out of a large breast. We generally do 2 breasts at a time (1 bird).
2. Lay your fillet in between plastic wrap and pound out to help tenderize the meat. The wife has a fancy little mallet / tenderizer but any pounding device should work.
3. Once done, salt the breast on both sides. Goose meats likes a lot of salt but that is a personal preference.
4. Cover in flour, then dip into an egg / mike wash, then coat in Italian Bread crumbs / Panako / or whatever you like.
5. In your pan have 1/4 inch of hot oil, lay in coated breast and cook for 2-4 mins (until golden brown) then flip and do other side. Only flip once.
6. Serve with a homemade pickle / relish with whatever side you like.
7. ENJOY!!!
|
That is a delicious way to cook goose.
|
10-14-2020, 11:37 AM
|
|
|
|
Join Date: Jan 2014
Location: Edmonton
Posts: 5,634
|
|
Yeah that sounds like making the schnitzel. I should try it too, we usually do it with the pork or turkey breast, it is delicious!
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:37 AM.
|