Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2013, 08:27 PM
Fuzzbucket Fuzzbucket is offline
 
Join Date: Jul 2013
Posts: 7
Default Cooey model 39 extractor install help please




Can anyone give me some advice on this? I picked up a new extractor for this old cooey, but am a bit confused as to how to properly install it into the bolt. It looks to me like it would need to be bent a bit in order for it to get seated properly into the hole near the handle and the side of the bolt. Should I just bend it until I can slip it in?
Reply With Quote
  #2  
Old 11-06-2013, 08:36 PM
SkytopBrewster SkytopBrewster is offline
 
Join Date: Nov 2008
Location: Rocky Mountain House
Posts: 1,395
Default

Start it in the back hole and compress it with a punch or something and work it in there, you have to bend it without "bending" it is it's own spring. A little grease may help wiggle it in there. It looks like the extracor slot is a little burred up, you may have to clean that up first. Make sure it fits before you try jamming it in there.
Reply With Quote
  #3  
Old 11-06-2013, 08:40 PM
Fuzzbucket Fuzzbucket is offline
 
Join Date: Jul 2013
Posts: 7
Default

Ahhh. That makes perfect sense. Thanks SkytopBrewster!
Reply With Quote
  #4  
Old 11-06-2013, 08:45 PM
SkytopBrewster SkytopBrewster is offline
 
Join Date: Nov 2008
Location: Rocky Mountain House
Posts: 1,395
Default

Once it's in the back hole you could push in on the back of the spring with a punch and gently pry the front up with a set on needle nose pliers, use just enough force to clear the front of the bolt. If you bend it out of shape you are going to have extraction problems or worse, snap it off. Don't try to hat it upor you will ruin the spring temper. You need 3 hands for some of these things, a vice would help. Swearing at these kind of things usually helps
Reply With Quote
  #5  
Old 01-17-2014, 03:18 PM
CptnBlues63 CptnBlues63 is offline
 
Join Date: Mar 2008
Location: Somewhere north of Edmonton
Posts: 616
Default

[QUOTE=Fuzzbucket;2185317
Can anyone give me some advice on this? I picked up a new extractor for this old cooey, but am a bit confused as to how to properly install it into the bolt. It looks to me like it would need to be bent a bit in order for it to get seated properly into the hole near the handle and the side of the bolt. Should I just bend it until I can slip it in?[/QUOTE]

Any chance you can tell me where you got yours?

I need an extractor for a model 39 myself.

If it's not too much trouble, please PM me.

Thanks!
__________________
It matters not how straight the gate,
How charged with punishments the scroll,
I am master of my fate:
I am the captain of my soul.

***William Henley***
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:37 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.