Go Back   Alberta Outdoorsmen Forum > Main Category > Hunting Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 12-31-2021, 05:02 PM
sns2's Avatar
sns2 sns2 is offline
 
Join Date: Dec 2010
Location: My House
Posts: 13,604
Default Best Skinning knife for $200

Hey fellas. I figured I would be exact about my budget, so in your experience, what skinning knife would you get for $200 or less?

No removable blade jobbies.

I know that is not a high end knife by any stretch, but it is all I got to put toward one at this time.

Thanks in advance for your replies!
Reply With Quote
  #2  
Old 12-31-2021, 05:16 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,908
Default

I really like my Grohmanns
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #3  
Old 12-31-2021, 05:37 PM
teledogs's Avatar
teledogs teledogs is offline
 
Join Date: Dec 2012
Posts: 1,656
Default

I am a Grohmann fan too. You can save a bit more and buy factory seconds direct from them. My folding belt knife is a seconds and I have yet to find the flaw. Made in NS.

https://www.grohmannknives.com/
__________________
There is no God higher than truth - Gandhi

Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend

Last edited by teledogs; 12-31-2021 at 05:42 PM.
Reply With Quote
  #4  
Old 12-31-2021, 05:49 PM
Fitscottn Fitscottn is offline
 
Join Date: Mar 2018
Location: Edmonton
Posts: 122
Default

I will vote Grohmann as well.

Have a boat knife originally owned by my Grandfather, still holds an incredible edge and easy to maintain.



Sent from my SM-G991W using Tapatalk
Reply With Quote
  #5  
Old 12-31-2021, 05:50 PM
Dick284's Avatar
Dick284 Dick284 is offline
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,796
Default

Buck 110
__________________


There are no absolutes
Reply With Quote
  #6  
Old 12-31-2021, 05:51 PM
JohnB JohnB is offline
 
Join Date: Jun 2007
Location: North
Posts: 2,194
Default

Mora, under $30 most places.
Reply With Quote
  #7  
Old 12-31-2021, 05:58 PM
CNP's Avatar
CNP CNP is offline
 
Join Date: May 2007
Location: WMU 303
Posts: 8,541
Default

The "Best" is a subjective. I use my own but for a factory knife I like the Outdoor Edge Swingblade
Reply With Quote
  #8  
Old 12-31-2021, 06:13 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,908
Default

I also like the Marttinni knives ( I use one on a regular basis ), but I much prefer a drop point to a clip or trailing point knife for field dressing and skinning .
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #9  
Old 12-31-2021, 06:15 PM
DirtShooter's Avatar
DirtShooter DirtShooter is offline
 
Join Date: Oct 2020
Location: Alberta
Posts: 791
Default

Something from clintc on here or CGN, he has some right around that price mark.

If not, Spyderco Bill Moran, or some benchmade product.
__________________
Your boos mean nothing, I've seen what makes you cheer.
Reply With Quote
  #10  
Old 12-31-2021, 06:39 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,299
Default

If you can find one of these, they are a great knife for the price.

https://www.herooutdoors.com/amp/crk...eather-sheath/
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #11  
Old 12-31-2021, 06:42 PM
Twisted Canuck's Avatar
Twisted Canuck Twisted Canuck is offline
 
Join Date: Jul 2009
Location: GP AB
Posts: 16,681
Default

Quote:
Originally Posted by catnthehat View Post
I really like my Grohmanns
Cat
Also a fan of Grohmanns. Good steel, holds an edge, fits the hand, and the angle and geometry just works. I don't know if there is anything better for that budget, and I don't think you would be able to tell if something was 'better'.

This is the one I have, I like the shorter blade on it.

https://grohmannknives.com/index.php...skinner-detail
__________________
'Once the monkeys learn they can vote themselves a banana, they'll never climb another tree.'. Robert Heinlein

'You can accomplish a lot more with a kind word and a gun, than with a kind word alone.' Al Capone
Reply With Quote
  #12  
Old 12-31-2021, 06:56 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 46,266
Default

Gerber Gator CM154, excellent steel, non slip handle for under $100.
__________________
Only accurate guns are interesting.
Reply With Quote
  #13  
Old 12-31-2021, 06:57 PM
Coho911's Avatar
Coho911 Coho911 is offline
 
Join Date: May 2010
Location: NW Calgary
Posts: 509
Default

This is such a tough question to answer because not only are the applications different (deer vs. elk vs. moose vs. birds, etc), but also how each person handles a knife (hand size to fit a handle, arm and hand position, movement, direction when skinning etc.)

I use a Fallkniven NL4 Frey as my belt knife because I LOVE the blade - BUT, when skinning deer or elk out I find the handle a tiny bit narrow, I picked up a Bark River Bravo to try out and I also love the blade on it but the Falkniven is still a tiny bit of a better skinner - UNTIL....

I tried an Esee Izula neck knife and WOW, the blade profile and belly on the blade is incredible for skinning - but short for quartering, lol.

------------

What knives have you got that you like currently? and are you looking for a purpose knife or a decades carry knife?

If its just a purpose knife - I find I often roll deer cleaning with a Mora Bushcraft Black. its always sharp, easy to hone while cutting with the scandi grind edge and I am never afraid to beat on it for any jobs in the woods (things I would NOT do with my other knives).

If I had $200 and was looking for a knife to clean and belt carry, I would grab a Bark River bravo 1, Bark River Aurora or a Grohman - depends on your cutting style and how you like the handle to fit your palm.
__________________
Yes - I am a leather worker. (just ask)
FIVE Leather, Calgary AB

Last edited by Coho911; 12-31-2021 at 07:15 PM.
Reply With Quote
  #14  
Old 12-31-2021, 07:08 PM
58thecat's Avatar
58thecat 58thecat is offline
 
Join Date: Dec 2012
Location: At the end of the Thirsty Beaver Trail, Pinsky lake, Alberta.
Posts: 25,339
Default

Hand size and your technique plays a big part.

https://grohmannknives.com/index.php...skinner-detail
__________________

Be careful when you follow the masses, sometimes the "M" is silent...
Reply With Quote
  #15  
Old 12-31-2021, 07:33 PM
Moo Snukkle's Avatar
Moo Snukkle Moo Snukkle is online now
 
Join Date: Jul 2011
Location: Stony Plain
Posts: 1,162
Default

I really dig a blade with a Scandi grind for skinning. I’ve used both Helle and Karesuando for skinning. I then switch to a boning knife to break an animal down quickly.
Reply With Quote
  #16  
Old 12-31-2021, 07:39 PM
schreyer's Avatar
schreyer schreyer is offline
 
Join Date: Sep 2011
Location: Sherwood Park, Alberta
Posts: 492
Default

I really like the Benchmade saddle mountain skinner. A little more than 200 but I would say it’s money well soent.
__________________
My mom says I'm a keeper.
Reply With Quote
  #17  
Old 12-31-2021, 08:32 PM
ditch donkey ditch donkey is offline
 
Join Date: Feb 2010
Posts: 677
Default

Guys, what am I missing?

I can buy a Havalon for 40 - 50 bucks. It’s always deadly sharp.
I watched some guys in Africa cape out a lion for a full mount with butter knives they sharpened on bricks.

I can’t understand why anyone would pay $100, $200, $500, $1000 for a skinning knife. But I also don’t understand why someone would install a stereo in a vehicle that already had one from factory. Everyone has there thing.

Does a higher end knife work better than a Havalon?
I understand some people appreciate good tools and see value in that. Is that it?
What am I missing?
__________________
The shy man goes hungry.
Reply With Quote
  #18  
Old 12-31-2021, 08:47 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 46,266
Default

Quote:
Originally Posted by ditch donkey View Post
Guys, what am I missing?

I can buy a Havalon for 40 - 50 bucks. It’s always deadly sharp.
I watched some guys in Africa cape out a lion for a full mount with butter knives they sharpened on bricks.

I can’t understand why anyone would pay $100, $200, $500, $1000 for a skinning knife. But I also don’t understand why someone would install a stereo in a vehicle that already had one from factory. Everyone has there thing.

Does a higher end knife work better than a Havalon?
I understand some people appreciate good tools and see value in that. Is that it?
What am I missing?
Myself and the OP helped another hunter to clean a moose in the field with a Havalon. It was around -20, and the fat/blood that kept freezing on the blade, made changing blades miserable, so we gave up on the Havalon, and used our fixed blade knives. That one experience was enough to keep me from ever buying a Havalon. Steels vary a great deal, and the cheapest knives aren't made with the better steels, that hold an edge longer, and require less sharpening.
__________________
Only accurate guns are interesting.
Reply With Quote
  #19  
Old 12-31-2021, 08:50 PM
jungleboy's Avatar
jungleboy jungleboy is offline
Moderator
 
Join Date: Jun 2010
Location: Stony Plain
Posts: 7,016
Default

Quote:
Originally Posted by ditch donkey View Post
Guys, what am I missing?

I can buy a Havalon for 40 - 50 bucks. It’s always deadly sharp.
I watched some guys in Africa cape out a lion for a full mount with butter knives they sharpened on bricks.

I can’t understand why anyone would pay $100, $200, $500, $1000 for a skinning knife. But I also don’t understand why someone would install a stereo in a vehicle that already had one from factory. Everyone has there thing.

Does a higher end knife work better than a Havalon?
I understand some people appreciate good tools and see value in that. Is that it?
What am I missing?
Agree , but the OP doesn’t want a replaceable blade knife.

I have been using the Shrade old timer drop point for close to 40yrs and have gutted and skinned more deer than I can recall with that blade. I have a bunch of other blades but that one always gets the nod.
If I was going to replace it I would probably buy a Mora and you can pay $80 for one of those these days if you take the higher grade knife.

I think it’s sort of like the Lee enfield vs Tikka. The end result is the same , deer with a hole in it and unaware of how much you spent on the hole puncher.

People like what they like can’t fault em for that.
Reply With Quote
  #20  
Old 12-31-2021, 08:54 PM
tranq78 tranq78 is offline
 
Join Date: Sep 2013
Location: Edmonton & Hinton
Posts: 545
Default

For $200? There's 2 choices, nice and smoking hot.

In our house we use Grohmann's and Damascus (technically it's pattern welded steel).

If you want to spend about $100 get a Grohmann. The fishing tackle store in Jasper puts their Grohmann's on sale each Thanksgiving weekend to clear out inventory.

If your budget is $200 then you can get Damascus steel, also in Jasper. I'm talking about real hand forged knives, not the Amazon or flea-Bay stuff. Bighorn gift store is the place, 604B Connaught Drive, Jasper, T0E 1E0. The owner imports hand made Damascus from Lebanon and we had a nice talk about the Rockwell hardness of his knives' edges. 8-9" drop point skinners are $159-170, labor costs are cheap in Lebanon.

If I had to choose for myself it would be the 8" custom hunting/skinning $159. YMMV. Damn, I think I'm talking myself into it.

facebook.com/bighornsteel/

Website: bighornsteel.ca/

Bighorn also sells semi-precious jewelry and stones as well. We found this place when my kids noticed the Damascus hunting knives for sale.

Last edited by tranq78; 12-31-2021 at 09:14 PM.
Reply With Quote
  #21  
Old 12-31-2021, 09:19 PM
ditch donkey ditch donkey is offline
 
Join Date: Feb 2010
Posts: 677
Default

Yeah, I can get behind not wanting to change blades, especially if fat and blood is freezing to it. I won’t change blades on mine unless I use pliers to hold the blade.

People like what they like. It’d be pretty boring if they didn’t.
__________________
The shy man goes hungry.
Reply With Quote
  #22  
Old 12-31-2021, 09:58 PM
mindoutside mindoutside is offline
 
Join Date: Nov 2014
Location: Calgary
Posts: 516
Default

I have tried a few different ones but I really like the buck 119.

It handles great for me and holds a good edge.

The long blade/ point is awesome for picking through joints
Did a bear hide with no problems
Reply With Quote
  #23  
Old 12-31-2021, 10:03 PM
Chewbacca's Avatar
Chewbacca Chewbacca is offline
 
Join Date: Dec 2012
Location: Secret Creek. BC
Posts: 983
Default

Check out North Arm Lynx. They hold an edge exceptionally well. Since your in Alberta I’m guessing they wouldn’t charge the BC tax. Should be close to your budget.
The Grohmanns is also a good choice. Different look but like the way they fit my hand.
__________________
👀 'They are out there, they look like us, they talk like us, but they ain't us' 👀
Reply With Quote
  #24  
Old 12-31-2021, 10:22 PM
Battle Rat Battle Rat is offline
 
Join Date: Dec 2008
Posts: 2,682
Default

Quote:
Originally Posted by ditch donkey View Post
Guys, what am I missing?

I can buy a Havalon for 40 - 50 bucks. It’s always deadly sharp.
I watched some guys in Africa cape out a lion for a full mount with butter knives they sharpened on bricks.

I can’t understand why anyone would pay $100, $200, $500, $1000 for a skinning knife. But I also don’t understand why someone would install a stereo in a vehicle that already had one from factory. Everyone has there thing.

Does a higher end knife work better than a Havalon?
I understand some people appreciate good tools and see value in that. Is that it?
What am I missing?
Havelon blades are made with low cost metals you can afford to through them away.
Yes they start out sharp but I could make a sardine can lid shaving sharp too but I can't make it hold an edge for very long,
I can skin and cape a moose with 3, $5.00 Henckel paring knives but I can also skin and cape a moose with one descent, reasonably priced blade.
I've tried replaceable blade knives and they suck compared to a reasonably priced solid fixed blade.

I can have a good quality knife skin and cape more than one moose with a little touch of a steel.

If all you do is gut and skin the odd deer a havalon will work.
Hell, a $2 dollar box cutter will work.
If you skin and flesh multiple animals on a regular basis, you will learn what is the most efficient and most economical.
Sharpening is not rocket science whether it is a knife, chain saw and ice auger.
__________________
Thank you front line workers and volunteers
Reply With Quote
  #25  
Old 12-31-2021, 10:24 PM
M.C. Gusto M.C. Gusto is offline
 
Join Date: Dec 2008
Posts: 801
Default

I have so many skinning knives amd that includes three handmade customs $$$. For sure Grohman is my favourite designed knives.
Reply With Quote
  #26  
Old 12-31-2021, 10:41 PM
pavilion pavilion is offline
 
Join Date: Mar 2009
Location: Medicine Hat
Posts: 126
Default

Spyderco stretch 2, on sale now at warriors and wonders for 130$

Sent from my Pixel 4a using Tapatalk
Reply With Quote
  #27  
Old 12-31-2021, 10:59 PM
Maxwell78 Maxwell78 is offline
 
Join Date: Jun 2011
Posts: 582
Default

So far my fav is the Knives of Alaska elk hunter. The D2 steel stays sharp for a long time
__________________
"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!" 1935-Adolf Hitler
Reply With Quote
  #28  
Old 12-31-2021, 11:19 PM
Smoky buck Smoky buck is online now
 
Join Date: Oct 2018
Posts: 7,699
Default

I tried all kinds of skinning knives for trapping/hunting even had some nice custom sets and I got rid of them all

Scalpel for fine work and cheap exacto knives for basic big game skinning is all I use now

They may not be pretty knives to show off but I have not found a better alternative yet
Reply With Quote
  #29  
Old 12-31-2021, 11:57 PM
cody j cody j is offline
 
Join Date: Feb 2009
Location: Sunset House
Posts: 1,269
Default

Quote:
Originally Posted by JohnB View Post
Mora, under $30 most places.
My current choice
Reply With Quote
  #30  
Old 12-31-2021, 11:58 PM
EZM's Avatar
EZM EZM is offline
 
Join Date: Jul 2010
Location: Edmonton
Posts: 11,940
Default

https://www.benchmade.com/hidden-can...mily-hunt.html

My buddy has this one, I love it ..... may splurge on one as well ...

I am currently using a Victorinox - I'm pretty sure it's around $50 and has moderate to soft steel which is nice when you re-touch it (very easy to touch up) and keep going with a razor sharp blade.

The Victorinox blade is larger/longer, but I like that as it seems you can keep control much better I find - the smaller blade is better for around the shanks but, then again around the legs it's not that critical.

https://www.amazon.ca/Victorinox-Ski...019690&sr=8-44
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:26 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.