![Reply](images/buttons/reply.gif) |
|
![Old](images/statusicon/post_old.gif)
03-06-2021, 10:14 PM
|
![6.5 shooter's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=11823&dateline=1261207127) |
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,402
|
|
Did some research into making my own bullets ... Might be another rabbit hole I should steer clear of... or not.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
![Old](images/statusicon/post_old.gif)
03-08-2021, 07:45 PM
|
|
|
Join Date: Oct 2014
Location: Coquitlam, BC
Posts: 20
|
|
Nothing. But got a lead for a bottle of H4895.
Tom
|
![Old](images/statusicon/post_old.gif)
03-08-2021, 08:32 PM
|
![catnthehat's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
Setting up a Bergera 6.5 Creedmoor fir a friend and finishing up the 6mnBR ammo for the AO rifle ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
03-08-2021, 09:51 PM
|
|
|
Join Date: Dec 2008
Posts: 1,035
|
|
skeet
3/4 oz.12 gauge # 8's n 9"s, low recoil, low velocity, but cheap to make, and break targets just fine, when the firearm operator center's the target!!! Using up old components.
|
![Old](images/statusicon/post_old.gif)
03-10-2021, 12:41 AM
|
|
|
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,946
|
|
Started tearing the bench down. Still have to load some 7-08 and some 6.5CM to keep me going til I get it set back up in a new place. Packed everything I didn't need today. I intend to get ladder rounds done for them both sometime in the next week, 140gr w/RL16, H4350, Varget for 7-08, 130gr for 6.5 with same powders, F210gm on all. Then I'll have something to shoot for a bit.
__________________
You should also be a member;
CCFR
CSSA
|
![Old](images/statusicon/post_old.gif)
03-10-2021, 01:02 AM
|
|
|
Join Date: Oct 2014
Location: West Kelowna B.C.
Posts: 410
|
|
Worked on converting 7.62 x 39 brass into 401 winchester cases.
|
![Old](images/statusicon/post_old.gif)
03-13-2021, 03:26 PM
|
![Davey Boy's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=47098&dateline=1397839068) |
|
|
Join Date: Nov 2013
Location: SW Calgary
Posts: 1,276
|
|
Motorized RCBS Trickler
I motorized my RCBS trickler. Turns the tube about 15 rpm. Can change pulleys for faster or slower. Motor 12 volt 10 rpm from China about $2 Momentary push button switch $1 Had the 12 volt adapter and printed the gears. Uses a rubber band for belt. Looks like it will work.
|
![Old](images/statusicon/post_old.gif)
03-13-2021, 08:37 PM
|
![6MT's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Shot some today...
Here’s the work ahead on the drying table...
Last edited by 6MT; 03-13-2021 at 08:49 PM.
|
![Old](images/statusicon/post_old.gif)
03-13-2021, 08:43 PM
|
![catnthehat's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
50 rounds of 6mmBR for the AO rifle and 50 for my own 6MMBR - trying H4895 to see how it works in them.
50 rounds for my 308 M70 prone rifle
did some more blocking on the AO rifle , closed off a gap underneath the bolt, started reshaping the stock where the tang sits, and built a loading ramp in the action floor for it. ![Smile](images/smilies/smile.gif)
Tomorrow we shoot! ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
03-14-2021, 06:18 AM
|
|
|
Join Date: May 2007
Posts: 16,200
|
|
Added another component. Or should I say rare element. :-)
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
![Old](images/statusicon/post_old.gif)
03-14-2021, 06:25 AM
|
|
|
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
|
|
Yesterday I primed 63 .243 brass for my new long range load, probably gonna go load them right now. Last days off I had steel out to 600m and hit every plate size with just using the H59 reticle. That .243 likes Hornady Eld m 108’s.
I also removed primers, trimmed case length, and chamfered close to 200 pieces of Hornady brass. Just gonna sonic clean them this morning and let them dry while I go back to work for 11 days.
__________________
Life’s a garden, Dig it! - Joe Dirt
|
![Old](images/statusicon/post_old.gif)
03-14-2021, 03:37 PM
|
|
|
Join Date: Mar 2011
Posts: 1,596
|
|
Organizing things in the new reloading room.
Sent from my SM-A102W using Tapatalk
|
![Old](images/statusicon/post_old.gif)
03-14-2021, 07:50 PM
|
![6MT's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Did some .357 magnum today for a Uberti revolver. And used my new favourite powder measuring tool....a dipper.
|
![Old](images/statusicon/post_old.gif)
03-14-2021, 08:24 PM
|
Banned
|
|
Join Date: Mar 2009
Posts: 5,700
|
|
Quote:
Originally Posted by cowmanbob
Organizing things in the new reloading room.
Sent from my SM-A102W using Tapatalk
|
Looking good
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 06:20 AM
|
|
|
Join Date: May 2007
Posts: 16,200
|
|
Uniformed some primer pockets.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 07:52 AM
|
![catnthehat's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
Loaded test ammo last night for a friend's Bergara so I can work up a load today, cleaned the .223 and 308 and loaded a bunch of 168's to see if I can replicate today what I did at 1K last week! ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 07:55 AM
|
|
|
Join Date: Jan 2012
Posts: 2,443
|
|
Quote:
Originally Posted by 6MT
Newest addition to the reloading room. A new cabinet!
I needed to move my AutoTrickler away from my AMP annealer. The 2 very large magnets inside the annealer were causing havoc for the lab grade scale. They were also interfering with the Bluetooth signal to the AutoTrickler.
|
I note your swing-arm magnifier light in your posts #271 & 343.
I suspect your lamp has a circular fluorescent surrounding the magnifier, which would give better illumination for the magnifier than my single rear mounted bulb.
I have several similar lights and many more steel mounts permanently fixed around all the work areas of my shop.
The original 60W incandescent bulb (100W was too hot for plastic housing,) has been replaced with much cooler LED.
I would prefer better quality swing-arm lights with LEDs around the magnifier, (source for purchase will be appreciated).
Many report electronic scale interference from florescent lights, and I have experienced severe interference starting my small (possibly brush-less) air compressor, immediately after replacing several 4' T12 fluorescent ceiling tubes with direct wire (no ballast) 4' T8 LED tubes, when running off the same circuit and switch.
You may experience similar interference of your electronic scale & Bluetooth system from other loads on shared power circuits.
I have not noticed any interference with my FX120i, running on a circuit with no fluorescents or LEDs.
A dedicated circuit, and/or a serious power conditioner (or UPS uninterruptible power supply) may be helpful.
Good Luck, YMMV.
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 08:28 AM
|
![6MT's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Yeah, I understand. That lamp is an LED. Doesn't seem to bother the AutoTrickler. I have isolated that on a separate circuit with a line conditioner. The sine wave is pretty stable now.
I can't remember where I got that lamp. It might have been Madhill ..?
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 11:28 AM
|
|
|
Join Date: Jun 2008
Location: Calgary Area
Posts: 2,467
|
|
Set up my new Ultrasonic cleaner
I set up my new ultrasonic cleaner. I was going to buy one from Cablelas or Bass pro but they are pretty expensive.
My wife worked in the medical field and she suggested I get one like they use.
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 11:35 AM
|
|
|
Join Date: Jun 2008
Location: Calgary Area
Posts: 2,467
|
|
Scale Envy
Quote:
Originally Posted by 6MT
Yeah, I understand. That lamp is an LED. Doesn't seem to bother the AutoTrickler. I have isolated that on a separate circuit with a line conditioner. The sine wave is pretty stable now.
I can't remember where I got that lamp. It might have been Madhill ..?
|
Not gonna lie I have a huge case of Scale / Dispenser envy
|
![Old](images/statusicon/post_old.gif)
03-16-2021, 10:33 PM
|
![6.5 shooter's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=11823&dateline=1261207127) |
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,402
|
|
Working on some test loads for my 22-250's. RWS brass, trimmed, full length resized, primer pocket squaring, de burred flash holes, Neck turned a few (5 out of 40) but not overly happy with the results so gonna try something different.
Will load tomorrow with 36 gr. Barnes Varmint Grenades' and TAC powder. should hit 4000 fps. pretty easy I think.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
![Old](images/statusicon/post_old.gif)
03-19-2021, 09:27 PM
|
![6.5 shooter's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=11823&dateline=1261207127) |
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,402
|
|
Made it to the range today bit windy.. ~50K + but the Factory Winchester heavy varmint LOVED the first load of 34.5 grs of TAC powder with a Fed 210M primers.
If I did my math right I got a .26725" five shot group at a 100yds. ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif) Not bad for a factory rifle.
As pressures and powder went up, groups fell off pretty quick. Not sure how fast they will run, another 30 loads or so just to make sure it was not just a fluke and the wind blew me on target, but so far so good.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
![Old](images/statusicon/post_old.gif)
03-19-2021, 09:43 PM
|
![403jeepin's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=25255&dateline=1602168832) |
|
|
Join Date: Jun 2011
Location: West of Calgary
Posts: 53
|
|
Love a quiet night at the bench rolling my own rounds. 38-55 Powdered by Remington 9 1/2 LR primers, 24grains of IMR-4198, Trimmed @2.075. Pushing a 245G RNFP DLG BB Cast boolit. 2.545 COAL. This mix is a tack driver in the 1894 Whinny 'Alberta Diamond Jubilee'
Sent from my SM-G975W using Tapatalk
|
![Old](images/statusicon/post_old.gif)
03-20-2021, 10:50 AM
|
![Sashi's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=49362&dateline=1604860359) |
|
|
Join Date: Jan 2014
Posts: 1,165
|
|
motorized my Accutrimmer
https://[IMG]imgur.com/a/pOZmNdt[/IMG]
removed the handle , drilled and tapped for hex machine screw. use drill as motor. ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
much easier on the old arm
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
|
![Old](images/statusicon/post_old.gif)
03-20-2021, 11:07 AM
|
![Sashi's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=49362&dateline=1604860359) |
|
|
Join Date: Jan 2014
Posts: 1,165
|
|
Quote:
Originally Posted by Sashi
https://[IMG]imgur.com/a/pOZmNdt[/IMG]
removed the handle , drilled and tapped for hex machine screw. use drill as motor. ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
much easier on the old arm
|
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
|
![Old](images/statusicon/post_old.gif)
03-20-2021, 05:43 PM
|
![catnthehat's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
Pulled a redundant 550B off my bench, finally sold it .
Other than that, started on a 200 lot of 6.5 Creedmoor brass after doing the load work up . ![Smile](images/smilies/smile.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
03-30-2021, 10:20 PM
|
|
|
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
|
|
My good friend gave me his RCBS case trimmer about 4 years ago since he hasn’t used it since he sold his 300 Rum. I never used it until I needed to trim some 7mm SAUM and 300 SAUM brass. I use the drill and the individual case trimmers lee has for all the other calibres. So I dusted off the RCBS trimmer, after I found it behind all my brass. I bought a bunch of pilots and shell holders for it, and today I made a stand for it. The stand let’s me clamp it in a vice and I put two dowels on it so it stands on its own for storing, even cut in a dato to hold the shell holders. Here’s some pictures.
__________________
Life’s a garden, Dig it! - Joe Dirt
|
![Old](images/statusicon/post_old.gif)
03-30-2021, 11:14 PM
|
|
|
Join Date: Dec 2016
Location: Williams Lake, BC
Posts: 326
|
|
Bench lamp
I found a clamp on Tensor magnifying L.E.D. at Staples last week. Wasn’t cheap at $80.00, but it sure is nice to work with.
|
![Old](images/statusicon/post_old.gif)
04-02-2021, 08:19 PM
|
![6MT's Avatar](image.php?s=defc1e9556ec232cde2695227702e8c6&u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Just moved what I shot today off the drying table after de-capping and wet tumbling.
101 cases of .44mag
100 cases of .357mag
50 cases of .38spl
100 cases of 45-70
Good thing it’s a long weekend, huh?
|
![Old](images/statusicon/post_old.gif)
04-02-2021, 10:54 PM
|
|
|
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,946
|
|
My bench is now in storage, but, I did get test rds for a 7RM done, 100rds of 218Bee, 100 of 223 Rem, 100 test rds for the 6.5cm, 95 test rds for the #1 in 7-08, have about 60 hunting rounds for the 700 in 7-08, 80 or so for the 300H&H and 100 or so for the 30R, plus more test loads for the 30R.
Out of this house on the 14th, may have new place lined up for about end of month, find out in AM for sure, have some others as backups to this bid, so,......we shall see where I wind up, I was looking in Hanna today, Sedgewick and Lougheed on Tues. Don't really think reloading bench will be reassembled til sometime late next month at best.
__________________
You should also be a member;
CCFR
CSSA
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:42 PM.
|