![Reply](images/buttons/reply.gif) |
|
![Old](images/statusicon/post_old.gif)
01-08-2021, 10:40 PM
|
![kujoseto's Avatar](image.php?u=25811&dateline=1604699399) |
|
|
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
|
|
Quote:
Originally Posted by sako1
great looking setup!!
|
agreed
|
![Old](images/statusicon/post_old.gif)
01-09-2021, 12:19 PM
|
|
|
Join Date: Jan 2012
Posts: 409
|
|
Quote:
Originally Posted by chuck
It’s a 3X this time. :-). A 6X is going in another set of QR rings for it though.
![](https://i.imgur.com/A9xGnc3.jpg)
|
Chuck: Who is the manufacturer of the bases and QD rings you are using on the picture you posted of the mounted 3X scope?
|
![Old](images/statusicon/post_old.gif)
01-09-2021, 12:28 PM
|
|
|
Join Date: May 2007
Posts: 16,200
|
|
Those are Leupold QR rings.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
![Old](images/statusicon/post_old.gif)
01-09-2021, 01:32 PM
|
|
|
Join Date: Apr 2012
Posts: 1,050
|
|
Quote:
Originally Posted by 6MT
I rolled up 50 rounds of 45-70 to test in my new Marlin 1895GBL. I have ten rounds of five different charge weights to test. My bullet is the 300gr RNFP by Campro over IMR4198 inside Winchester brass.
I’m just looking to get the feel of the big bore 18.5” rifle, guage the speeds, and see how the recoil is. I’m probably looking for an ideal combination with around 1900fps.
We’ll see how it goes on Saturday.
|
let me know how those campro's do, I have a lot of the 405 ones from them and they are doing great with the new load now. The 300gr ones are a little easier to find though...
|
![Old](images/statusicon/post_old.gif)
01-09-2021, 05:38 PM
|
![6MT's Avatar](image.php?u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Rolled up my first 50 rounds of 45-70. I had 5 charge weights, ten rounds each.
45.0gr 1712fps, 46.0gr 1748fps, 47.0gr 1763fps, 48.0gr 1790fps, and 49.0gr 1826fps.
AND...they all went bang! I’m happy since I had never loaded 45-70 before. And the rifle survived...
My goal was around 1900fps for speed. And since the temperature was -5c, there should be faster speed when we get above 15c. Next on the agenda, another 50 test rounds with 48.5, 49.0, 49.5, 50.0, and 50.5 grains of the IMR4198.
And the buckhorn sights really suck. I have Skinner peeps coming. So relief soon.
Accuracy for the Campro 300gr......not sure yet. The sights are so bad, that I can’t judge the accuracy yet. I’ll let you know.
|
![Old](images/statusicon/post_old.gif)
01-09-2021, 07:51 PM
|
|
|
Join Date: Jan 2013
Posts: 2,970
|
|
Quote:
Originally Posted by 6MT
Rolled up my first 50 rounds of 45-70. I had 5 charge weights, ten rounds each.
45.0gr 1712fps, 46.0gr 1748fps, 47.0gr 1763fps, 48.0gr 1790fps, and 49.0gr 1826fps.
AND...they all went bang! I’m happy since I had never loaded 45-70 before. And the rifle survived...
My goal was around 1900fps for speed. And since the temperature was -5c, there should be faster speed when we get above 15c. Next on the agenda, another 50 test rounds with 48.5, 49.0, 49.5, 50.0, and 50.5 grains of the IMR4198.
And the buckhorn sights really suck. I have Skinner peeps coming. So relief soon.
Accuracy for the Campro 300gr......not sure yet. The sights are so bad, that I can’t judge the accuracy yet. I’ll let you know.
|
You should like the skinners. I love shooting my 45-70 although my new one has XS sights my old one had the winged Skinner with Skinner front blade that I shot extremely well out to 200 yds. I.Generally load imr 3031 or varget for full power loads but, red dot or unique makes for a dandy light plinking load.
Nice rifle BTW
|
![Old](images/statusicon/post_old.gif)
01-10-2021, 09:40 AM
|
![darren32's Avatar](image.php?u=22740&dateline=1435337694) |
|
|
Join Date: Mar 2011
Location: Edmonton
Posts: 1,015
|
|
Quote:
Originally Posted by 6MT
Rolled up my first 50 rounds of 45-70. I had 5 charge weights, ten rounds each.
45.0gr 1712fps, 46.0gr 1748fps, 47.0gr 1763fps, 48.0gr 1790fps, and 49.0gr 1826fps.
AND...they all went bang! I’m happy since I had never loaded 45-70 before. And the rifle survived...
My goal was around 1900fps for speed. And since the temperature was -5c, there should be faster speed when we get above 15c. Next on the agenda, another 50 test rounds with 48.5, 49.0, 49.5, 50.0, and 50.5 grains of the IMR4198.
And the buckhorn sights really suck. I have Skinner peeps coming. So relief soon.
Accuracy for the Campro 300gr......not sure yet. The sights are so bad, that I can’t judge the accuracy yet. I’ll let you know.
|
That's gotta be CHAS
I am still trying to get thru the 50 I loaded for my SBL 5 years ago. Boy that thing bucks.. You will like the peeps, HUGE improvement. That is what I have on mine now. I did have a vortex venom on it for a while. It looked stupid but was pretty functional.
We need to do a lot of shooting before we need to do any reloading but .... I did put a couple if inline mirrors on the 650 so I could keep an eye on the feeders. Not very exciting I know .... but it's something, right??
|
![Old](images/statusicon/post_old.gif)
01-10-2021, 01:10 PM
|
![6MT's Avatar](image.php?u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Finished my second lot of 50 rounds of 45-70. I rolled up another 5 charge weights to test.
I’m getting used to the big case. I think it’s akin to the BMG case. It has its own particularities. Such as feel. How it sizes. How it crimps.
This batch is better then the first batch. I’ve got the crimping die set up perfectly now. But it is different than the other smaller calibers that I crimp. Much more force is required to get a decent crimp. Also, I was very particular on the case length after sizing so that the crimp would be consistent. My margin was +/-.001”.
|
![Old](images/statusicon/post_old.gif)
01-10-2021, 08:26 PM
|
|
|
Join Date: Aug 2008
Location: south of calgary
Posts: 1,845
|
|
some cleaning/organizing
loaded 200 7 br
bought a gun to get the scope
loaded 450 more 7 br
ogled my new gun; now trying talk myself into not raping it.....
__________________
220swifty
1. People who list their arguments in bullets points or numerical order generally come off as condescending pecker heads.
2. #1 is true.
|
![Old](images/statusicon/post_old.gif)
01-10-2021, 09:11 PM
|
![catnthehat's Avatar](image.php?u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
Bought a trigger and ordered a rail for the AO Mauser this morning and sorted out my Bullseye target Cam with the new phone.
Another 100 6MMBR loaded last night and spent the day at the range in my "bondage coat and sling" ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
01-11-2021, 06:26 PM
|
|
|
Join Date: May 2007
Location: Alberta
Posts: 2,581
|
|
brass
AMP annealed some 338-06 and some 9.3 x62 for a fine old AO fella
|
![Old](images/statusicon/post_old.gif)
01-11-2021, 07:22 PM
|
![6MT's Avatar](image.php?u=51107&dateline=1725141291) |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,128
|
|
Installed the last piece of the accessories/improvements for my AutoTrickler.
And, the acid test...bulk throwing of “fine pepper” BLC(2). No splashing now!
|
![Old](images/statusicon/post_old.gif)
01-11-2021, 09:26 PM
|
![no-regard's Avatar](image.php?u=38836&dateline=1413218576) |
|
|
Join Date: Dec 2012
Posts: 691
|
|
Quote:
Originally Posted by 6MT
Installed the last piece of the accessories/improvements for my AutoTrickler.
And, the acid test...bulk throwing of “fine pepper” BLC(2). No splashing now!
|
Can we be friends?!!
|
![Old](images/statusicon/post_old.gif)
01-12-2021, 11:09 AM
|
![Davey Boy's Avatar](image.php?u=47098&dateline=1397839068) |
|
|
Join Date: Nov 2013
Location: SW Calgary
Posts: 1,276
|
|
Printed a box for my Hornady Comaparators. Not my design though.
|
![Old](images/statusicon/post_old.gif)
01-12-2021, 05:20 PM
|
![cornuteo's Avatar](image.php?u=2793&dateline=1315769094) |
|
|
Join Date: Jan 2008
Posts: 257
|
|
Bed and re finish
Spent a week steaming dents, stripping, sanding, pillar and weld bedding this “ extra Sako” stock. Then re finishing to 1000 grit wet sand in a satin finish. 1 inch cut off stock to allow for 13.5 inch pull with limbsaver attached.
|
![Old](images/statusicon/post_old.gif)
01-13-2021, 02:36 PM
|
|
|
Join Date: Jun 2010
Posts: 141
|
|
Wasn’t today, but on Monday...
Cried.... too many rifles and not enough time to play with them. Plus killed the shoulder on 300wsm. And got sloppy with technique with loads that i knew weren’t keepers
Wished I could be a one rifle man. Good thing I’m not married
|
![Old](images/statusicon/post_old.gif)
01-13-2021, 08:47 PM
|
![Bushrat's Avatar](image.php?u=71&dateline=1335927639) |
|
|
Join Date: May 2007
Posts: 7,041
|
|
Quote:
Originally Posted by blackburbot
Wished I could be a one rifle man. Good thing I’m not married
|
I had a good wife once.....until her husband found out....now I stick to guns
|
![Old](images/statusicon/post_old.gif)
01-13-2021, 09:45 PM
|
![Sashi's Avatar](image.php?u=49362&dateline=1604860359) |
|
|
Join Date: Jan 2014
Posts: 1,165
|
|
Reloaded a couple boxes of 6.5x55, various loads and various powders.
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
|
![Old](images/statusicon/post_old.gif)
01-13-2021, 09:56 PM
|
![catnthehat's Avatar](image.php?u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
The only thing that happened in my reloading room today was I took my son's and my .223 match rifles out and took them to the range, shot the jeepers out of the 300, 385, and 500 meter targets , then came home and put them back in - loading time again! ![Thinking 006](images/smilies/thinking-006.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
01-14-2021, 09:08 PM
|
|
|
Join Date: Apr 2019
Posts: 111
|
|
Put my just aquired 35 Whelen barrel on my Pro Hunter. A big thank you to Kodiakken for the barrel. Now to get dies and brass oh ya bullets too.
|
![Old](images/statusicon/post_old.gif)
01-16-2021, 04:05 PM
|
![Davey Boy's Avatar](image.php?u=47098&dateline=1397839068) |
|
|
Join Date: Nov 2013
Location: SW Calgary
Posts: 1,276
|
|
Made a sight for my Labradar
3D printed a sight for the Labradar. Came out OK, just took 3 hrs. Fits tight without using the center bolt.
|
![Old](images/statusicon/post_old.gif)
01-16-2021, 06:17 PM
|
|
|
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
|
|
I organized some of the tools I have, pounded some nails in to my wall backer above my bench. Hung my O Give tools and inserts to get them out of the baggy, now it’s just grab and go.
I also pressed 88 30-06 rounds, 165 gr nosler partitions and varget. Used about 3/4 of a lb doing that.
Down to about 5.8 lbs of varget left on the shelf, but that will last years now that I use H4350 for my two target rifles.
__________________
Life’s a garden, Dig it! - Joe Dirt
|
![Old](images/statusicon/post_old.gif)
01-16-2021, 06:19 PM
|
|
|
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
|
|
Quote:
Originally Posted by Davey Boy
3D printed a sight for the Labradar. Came out OK, just took 3 hrs. Fits tight without using the center bolt.
|
That’s pretty bad A what you did there. Thanks for sharing, I bet it would work dandy.
__________________
Life’s a garden, Dig it! - Joe Dirt
|
![Old](images/statusicon/post_old.gif)
01-16-2021, 07:35 PM
|
![catnthehat's Avatar](image.php?u=655&dateline=1640378359) |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,830
|
|
Showed a buddy how to load for his 308 Winchester, loaded some 6MMBR and some 6.5 Freddy Mercury.
Out today at the range practicing some offhand irons shooting at 200 and 300, and 500 with the .223 and 6mmBR irons rifles.
Now I am out of ammo for the Creedmoor , but I still have lots of 223 and 6mmBR for the irons rifles! ![SHa Shakeshout](images/smilies/sHa_shakeshout.gif)
Still on the fence about that big Creedmoor- even though it will shoot 1/2 MOA or better on a regular basis at longer ranges , shooting a big scoped rifle with a brake just isn't my thing. I may just twist the 308 Palma barrel back on and go back to thee irons on that rifle! ![Thinking 006](images/smilies/thinking-006.gif)
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
![Old](images/statusicon/post_old.gif)
01-17-2021, 12:48 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
Got the handle from Lyman for my Victory press finally! It did take a bit longer than what I would have liked, but I didn’t have to show proof of purchase at all. So all in all a positive warranty experience.
I deprimed 200 7mm rem mag cases and deburred the flash holes.
Just happy I can finally use my equipment!
Sent from my iPhone using Tapatalk
|
![Old](images/statusicon/post_old.gif)
01-17-2021, 11:00 PM
|
![6.5 shooter's Avatar](image.php?u=11823&dateline=1261207127) |
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,402
|
|
Mounted 2 scopes, one on a 7mm-08 and the other on a 22-250. Now off to the range.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
![Old](images/statusicon/post_old.gif)
01-18-2021, 11:50 PM
|
|
|
Join Date: Jun 2010
Posts: 350
|
|
First batch of 124 Hornady shells in 7mm rem mag fully prepped and looking pretty after the wet tumble.
I’m using the basic lee trimmer and pilot that attaches the shell holder to a drill. It works, it’s consistent, and it will rip your hands apart haha. I’ll be investing in a trimmer in the future lol. I’m already tempted to grind the shell holder flat on two sides and use a wrench on it. Just seems like it would be easier to use and a lot less wear on my hands.
Sent from my iPhone using Tapatalk
|
![Old](images/statusicon/post_old.gif)
01-20-2021, 07:33 PM
|
![Davey Boy's Avatar](image.php?u=47098&dateline=1397839068) |
|
|
Join Date: Nov 2013
Location: SW Calgary
Posts: 1,276
|
|
Barrel Cooler
Printed a barrel cooler much like the ones you buy. Will see how it works on a hot day.
|
![Old](images/statusicon/post_old.gif)
01-20-2021, 08:15 PM
|
|
|
Join Date: Mar 2009
Location: Medicine Hat
Posts: 126
|
|
Added a rotary tumbler to the mix, I already have an ultrasonic cleaner but have always wanted to try one of the wet rotary units, couldn't really justify the cost of the real ones but came across this one for 100 bucks from the usual suspects....just got it today so haven't got around to actually using it yet but threw in 50 new 7 rem mag brass to see how they fit
Sent from my Pixel 4a using Tapatalk
|
![Old](images/statusicon/post_old.gif)
01-21-2021, 04:37 AM
|
![waldedw's Avatar](image.php?u=57590&dateline=1431610920) |
|
|
Join Date: Apr 2015
Location: Lloydminster
Posts: 4,820
|
|
Loaded 100 rounds of 204 for a friends son, resized and prepped 60 cases for my 300 RUM.
Today I have a friend coming over that is just getting into reloading he wants to do some under supervision ![Smile](images/smilies/smile.gif) no worries we'll do 100 or so rounds for my 223 and by then he'll have the just of it. You tube has given him most of the info already he just wants some hands on.
__________________
The problem we have today is that the people who work for a living are outnumbered by the people who vote for a living.
We were all born ignorant but one must work very hard to remain that way.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:45 PM.
|