I was wondering what other people are using for powder,grains and lead for reloading. I shoot a Sako and use RL22 with about 80 grains (don't have my log book handy) and 162 grain Hornady SST . It shoots pretty good but I think I can do better. Any help would be appreciated.
Im using H1000 in mine ,,,87 and 92 showed promise ....i havny chronoed yet
bullet is a 168grain hpbt ....
i finally got sum retumbo threw it and had better results with h1000
Last edited by sdeviation; 09-12-2008 at 10:17 AM.
I just picked up a 7mm RUM a few weeks ago. Been shooting some factory ammo while I figure out what I plan on loading.
Thinking I'll probably go with the 140grain Accubonds. The partitions are nice for sure but I want something low fouling for mostly doing some long range shooting at targets (paper and metal gongs) and medium sized game (deer).
I was planning on going with RL25 and starting with 87grains.
I'm definately interested in what others are using for loads.
im loading the 168`s just to get a feel of the rifle`s loads
i have the 160 accubonds to run threw it soon as i figure things out ....
let us know how RL-25 does for yea....
Swift Scirocco 150gr bullets with 89.5 gr of H1000 , Remington 9 1/2 Mag Primer and Remington Case. Will shoot .429" or less groups @ 100 all day. Bullet has done very well on both close and long range animals, from Antelope to moose. Always be careful getting Reloading info off a board. I worked many loads up from the Swift Reloading manual before I found the one my gun liked. I wanted these bullets and just kept working until I found a good load.