Yup - ram mounts for all three head units, the trolling motor, and anything else I can think of !!!!!!! they are awesome.
Disregard the mount on the passenger side in the picture - was just setting up the cords when I took the picture. I ran an Ethernet hub, and cords to 5 areas in the boat, so I can have two at the helm and one up front on the bow, one at the passenger side, one at the back while trolling lakers etc.... any combination of three head units at spots on the 5 areas I wired up within the boat.
All you need is 2 extra base balls at those locations and you are set !!!!!!
I put on a high density foam block, with a zip tie, on the bottom of the arm to prevent the mount from giggling loose, but they are solid. They loosen up after hours and hours of bumpy gravel roads out in the sticks.
I love them.
|