Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-27-2010, 12:50 PM
Taco Taco is offline
 
Join Date: Dec 2007
Location: Claresholm, Ab
Posts: 4,022
Default Stock Checkering Restoration? Parker Hale Rings?

Anyone down south that can do some stock checkering restoration work for me? Someone about 35+ yrs ago attempted an amateur hour refinish job and sanded the checkering pretty bad. I'm bringin' back the original oil finish and I'd try it myself but it's my late father's old BSA 270 Featherweight and I'd rather not eff it up twice.

Also; I'll be damned if I can find where I put the old scope rings. If anyone has an old set of Parker Hale rings to fit on a BSA featherweight w/the built in rails, I'll put'em to good use. Otherwise the rifle has to go into the gunsmith for a checkup and he can make something work.

Thanks
Reply With Quote
  #2  
Old 03-27-2010, 03:42 PM
wwbirds's Avatar
wwbirds wwbirds is offline
 
Join Date: May 2009
Location: near Calgary
Posts: 6,638
Default

Dembart checkering tools sells complete sets of tools but you would have to know lines per inch to match the existing (whats left of it) pattern. Normally if the lines are not sanded a touch up can be accomplished with just the checkering v-(veining) tool to restore some crispness.

While you are at it I highly recommend his european oil finish which you rub in and then wet sand. Factory finish results. did two stocks this past winter.
Rob
Reply With Quote
  #3  
Old 03-28-2010, 03:40 PM
gonewest gonewest is offline
 
Join Date: Feb 2010
Posts: 250
Default

How does some checkering get the burned look. Some just accent the stock so much better when the checkering has that burnt look.
Reply With Quote
  #4  
Old 03-28-2010, 03:47 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 15,777
Default

Quote:
Originally Posted by gonewest View Post
How does some checkering get the burned look. Some just accent the stock so much better when the checkering has that burnt look.
The "burned look" is a sign of poor checkering IMO. Good professionally done checkering should not distract the eye and interrupt the grain structure of the wood.

__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #5  
Old 03-28-2010, 07:32 PM
Grizzly Adams's Avatar
Grizzly Adams Grizzly Adams is offline
 
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
Default

Check out the gun show next weekend, for the rings. There are usually a couple of people there who have stuff, like that.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
Reply With Quote
  #6  
Old 03-29-2010, 12:49 PM
wwbirds's Avatar
wwbirds wwbirds is offline
 
Join Date: May 2009
Location: near Calgary
Posts: 6,638
Default

Dark checkering can also be a sign of the use of alcanet root stain which is very common for european but especially British stock makes to use to bring out the grain. If the dark "burnt" area has a reddish purple hue to it I would bet it is alcanet root.
Staining wooden stocks is frowned upon by the purist stockmakers of the US especially but accenting the grain with alcanet is very common in Britain. Gives the light wood a nice orange tinge and darkens the dark swirls in good wood to a deep blue/purple.
Rob
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:15 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.