AR 500 targets - Page 4

johnnyc14 · #91 02-22-2013, 06:13 AM

Quote:

Originally Posted by Lefty-Canuck

No not at all! I will hold onto them till you get back...

So far from PM and messages I am picking up for:
Cornteo
Pinhead
Depopulator

If I missed anyone or someone else needs me to pick up reply to this thread.

LC

Hi LC, I'd appreciate if you would pick up mine as well. It's a 12" round one.

Thanks

Jordan Smith · #92 02-22-2013, 05:45 PM

Guys,

The targets are now in my hands. The steel looks awesome, and appears to be very high quality, and very well cut. The only thing that I would have him change for the next GB, is that the hanging holes are only a few inches apart, rather than the 8" apart like I would prefer, but other than that they look superb.

PLEASE EMAIL ME AT JORDAN(at)JERBELAUTOWERKS(dot)COM TO ARRANGE PICKUP/PAYMENT, AS MY PM BOX IS TOTALLY FULL!

Thanks
Jordan

speedfreak · #93 02-22-2013, 06:03 PM

If there is another run I'll put my order in!
I would be looking for
2 18" circles
2 12" circles
2 8" circles
2 30"x18" plates

all in 3/8

Thanks
Would also be hopefully somebody could bring them back to Edmonton from Calgary. I'll buy beer!

Lefty-Canuck · #94 02-22-2013, 07:12 PM

Quote:

Originally Posted by Lefty-Canuck

No not at all! I will hold onto them till you get back...

So far from PM and messages I am picking up for:
Cornteo
Pinhead
Depopulator

If I missed anyone or someone else needs me to pick up reply to this thread.

LC

Ok so far I have these folks plus...
Johnnyc14

Any others? Slight chance I will be in Calgary for work next week.

LC

Stinky Coyote · #95 02-22-2013, 08:38 PM

I can't pick up till 25th, I'll contact u then

Jordan Smith · #96 02-24-2013, 12:08 AM

Many of you guys have picked up, or contacted me about picking up your plates. If you haven't, please either post in this thread, or email me at the email address listed above.

Thanks

Lefty-Canuck · #97 02-24-2013, 12:28 AM

Quote:

Originally Posted by Jordan Smith

Many of you guys have picked up, or contacted me about picking up your plates. If you haven't, please either post in this thread, or email me at the email address listed above.

Thanks

Slight possibility I will be in Calgary on Tuesday for work and can pick up the targets for the northern folks who are paid in full.

LC

johnnyc14 · #98 02-24-2013, 02:11 AM

Quote:

Originally Posted by Lefty-Canuck

Slight possibility I will be in Calgary on Tuesday for work and can pick up the targets for the northern folks who are paid in full.

LC

I am paid in full so please pick up mine (1 twelve inch round) up when you get to Jordan's place. Thanks!

Jordan Smith · #99 02-24-2013, 09:27 AM

Quote:

Originally Posted by Lefty-Canuck

Slight possibility I will be in Calgary on Tuesday for work and can pick up the targets for the northern folks who are paid in full.

LC

Okay. The evening should be alright.

Still waiting on pinhead, but everyone else that is on your list so far has paid in full.

1000yards · #**100** 02-24-2013, 01:20 PM

Will you be making a new thread for the next order or continuing in this one?

Lefty-Canuck · #**101** 02-24-2013, 05:49 PM

Quote:

Originally Posted by 1000yards

Will you be making a new thread for the next order or continuing in this one?

I think this was a one time thing.... But not totally sure.

LC

canadianhunter · #**102** 02-24-2013, 08:52 PM

Picked them up today. Look great! Can't wait to shoot them. Again great job in organizing this Jordan, it is appreciated.

Jordan Smith · #**103** 02-24-2013, 09:27 PM

Quote:

Originally Posted by Lefty-Canuck

I think this was a one time thing.... But not totally sure.

LC

That was the plan, but there's no reason we can't do it again at some point if people want more plates.

Smokinyotes · #**104** 02-24-2013, 10:03 PM

Wishing now that I would have made mine out of AR plate. I cut mine yesterday morning out of 1/2" mild steel. Shooting the sks, 6.5x55 and the 223 yesterday they are almost good for the garbage.

vtecngsr · #**105** 02-25-2013, 03:21 PM

Quote:

Originally Posted by Lefty-Canuck

Slight possibility I will be in Calgary on Tuesday for work and can pick up the targets for the northern folks who are paid in full.

LC

Hey Lefty if its not too late could you pick up for me too?

thanks

Vtecngsr

Lefty-Canuck · #**106** 02-25-2013, 03:59 PM

Sure thing as long as you are paid up when I make it down there then it's all good.

I was hoping to get there tomorrow the 16th of February but it looks like that trip is now postponed slightly.

LC

Au revoir, Gopher · #**107** 02-25-2013, 06:01 PM

Quote:

Originally Posted by Lefty-Canuck

I was hoping to get there tomorrow the 16th of February but it looks like that trip is now postponed slightly.

You must be driving a DeLorean

ARG

Lefty-Canuck · #**108** 02-25-2013, 08:38 PM

Quote:

Originally Posted by Au revoir, Gopher

You must be driving a DeLorean

ARG

LOL that's awesome

16...26 what's the difference...

LC

Lefty-Canuck · #**109** 02-26-2013, 05:20 PM

Jordan please PM me your contact info I will be in Calgary area on Thursday this week.

LC

Jordan Smith · #**110** 02-26-2013, 06:10 PM

LC,

Please fire me an email at jordan(at)jerbelautowerks(dot)com, and I'll give you some additional contact info.

Thanks
Jordan

Jordan Smith · #**111** 02-26-2013, 06:14 PM

Guys,

I'm getting hit with tons of messages and emails from people that want plates, but missed out on the first GB that just ended. They're asking if we'll be doing another one soon, so I figure it wouldn't hurt to do another GB in the next week or two for all the guys that missed out on the first one. If you want more plates, now is the time to speak up and I'll put it down on the wait list for the next run. Like I say, hopefully we can make this happen in the next week or two.

Having said that, please be patient with me. It takes time to organize and carry out a GB like this, and with family and work to take care of, something like this doesn't get done overnight. Thanks for understanding.

toomanyhobbies · #**112** 02-26-2013, 10:48 PM

Jordan, I'm curious what a sheet of AR500 is worth? A guy could get carried away and build a pretty fantastic backstop with a 4x8 foot chunk of 1/2".

Jordan Smith · #**113** 02-27-2013, 12:14 AM

Oh boy. Now you're getting crazy

Lefty-Canuck · #**114** 02-27-2013, 06:35 PM

OK looks like I am a for sure down to Calgary and back tommorrow...

I have on my list to pick up and bring back North:

Pinhead
Depopulator
Cornuteo
Johnnyc14
vtechngsr

I will be home late tomorrow night and there might be a slight chance of catching up with some guys Friday....but I am down to Red Deer for the weekend at the MOAS...I seem to be around all next week though (local to Edmonton) so thats what my time is looking like folks.

LC

vtecngsr · #**115** 02-27-2013, 07:04 PM

many Thanks LC

VtecNgsr

Jordan Smith · #**116** 02-27-2013, 09:26 PM

Guys,

Sorry to all who are trying to send PM's to my full inbox. I just deleted a few and made some space.

A little less than half of the 40 guys that got in on the first part of this GB have picked up their steel. There are still several guys who I haven't heard from since the targets were finished and ready for pickup. If you haven't touched base with me yet, please email me at jordan(at)jerbelautowerks(dot)com.

Pudelpointer · #**117** 02-27-2013, 09:44 PM

If you end up with any "not picked-up", let me know what is available and I will likely grab a couple.

Alternatively, I am interested in buying some if you do another group buy (tried to pm you earlier, glad you made some room.

Jordan Smith · #**118** 02-27-2013, 10:03 PM

The GB part "deux" is a go. I've already got a good handful of guys that want plates and missed out on part 1 of the GB. Let me know what you want, and I'll put it down on the list. We'll tally the final order on part 2 of this GB in the next week or two.

Stinky Coyote · #**119** 02-28-2013, 08:14 AM

i can't get you on the jerbal autowerks email, pm me or i'll see if we email chatted before? i need to finish up with you on my plates and pick up

Jordan Smith · #**120** 02-28-2013, 08:20 AM

It's jerbelautowerks.com