Quote:
Originally Posted by 223MB
I was shooting my newish 870 wingmaster today and after about 10 shots or so i noticed my buttstock start to twist at the receiver. I could grab it and spin it quite a bit. Is repairng it as simple removing the buttpad and tightening a screw or do I have a bigger issue?
|
^yep. 2 screws to remove the recoil pad, then you'll see access to the stock bolt. Give it a good tightening, replace the recoil pad. Even a bit loose, it shouldn't be able to "twist" or rotate too much..but ANY amount feels like allot when it's a gun stock that shouldn't be moving at all.