Pics of your problem would help
Get a big enough syringe that can penetrate the veneer layer
Use a strong glue viscous enough to be sucked up with the syringe
Inject the bubble with glue
Take the wax paper , double or triple it up over the bubble
Put plywood or something similar over the wax paper & clamp
After it's dry remove claps , pealed off as much wax paper as you can
Then sand n refinish
It will not be 100% but probably good enough
Or you could remove the old Veneer top and replace it
But probably better off buy a new table
__________________
.....Only here for buy n sell....
|