jiffy auger

[pwat]

I was out at peppers lk on fryday and my auger was running good untill I got it under load not pushing it to hard just enuff to keep it digging and it was bogging down and if I wasent carefull it staled out just had it cleaned out and tuned but its kinda ruff at full throtel any ideas what I can do to fix this problem thanks for any help

[splake0]

Sounds like air/fuel mixture needs to be adjusted.

[pwat]

thanks I'll try that

[lakerman]

got the same problem, Ive got the white lightning and can't seem to figure out where those screws are, I can get it to work but only if the choke is open just to the right spot, all help would be beneficial

[thorne]

Be absolute sure it is the fuel air mixture before you reset it. If not it's like turning up the radio to drown out the nasty engine noise in your car. Be sure to check air filters, plugs, clogged exhaust, transmission lube and free play and possibly bad fuel....and to be sure...get rid of and get a good brand....that fixed my jiffy issues for good last year!

[splake0]

Originally Posted by lakerman

got the same problem, Ive got the white lightning and can't seem to figure out where those screws are, I can get it to work but only if the choke is open just to the right spot, all help would be beneficial

Near the carb. Some have a plastic cover on them (my stealth did). I removed the covers and the air/fuel mixture screws were exposed. I made my adjustments and it worked great ever since.

[ladyjig]

I had the same problem with my jiffy 30. I poured out the gas and started new, make sure u mix exactly as required. I started it and let it run get all the good gas in and adjust the air intake, the screw on the top of fuel tank. Maybe u have tried this already.......good luck! hope u find the problem and fix it so u can get out there and fish.

[buckman]

Buy some opti 2 its the best oil for 2 strokes.

[GregT]

Originally Posted by buckman

Buy some opti 2 its the best oil for 2 strokes.

x2