|
05-14-2010, 07:37 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
Timney Trigger question
im putting a new trigger in my ruger .270 and im wondering if the safety wont clear the new trigger do i file the trigger or the safety?
|
05-14-2010, 07:41 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
A good rule of thumb is to file the cheapest part. However that is not always the case. Do you have a picture?
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-14-2010, 07:42 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
Quote:
Originally Posted by chuck
A good rule of thumb is to file the cheapest part. However that is not always the case. Do you have a picture?
|
yup give me a minute
|
05-14-2010, 08:10 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
[/IMG]
[/IMG]
its kindve hard to tell by these pics chuck, but the safety is just barely hitting the trigger safety tab, i think they called it, by like a 16th or 32nd.
|
05-14-2010, 08:50 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
I believe you need to remove material from the trigger to allow clearance to engage the safety and not to much that the trigger can fire when the safety is applied.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-14-2010, 08:52 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-14-2010, 08:57 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
ya i saw that after re reading them haha, but im pretty nervous about screwing it up, but oh well. And also last time i had my barrel off my stock it took alot of dinking aound to get the barrel floated again, is there an easier way to put it back together the right way , i seem to always have a problem with the barrel not being floated properly, and the floor plate not latching 100%
|
05-14-2010, 09:02 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
Quote:
Originally Posted by ksteed17
ya i saw that after re reading them haha, but im pretty nervous about screwing it up, but oh well. And also last time i had my barrel off my stock it took alot of dinking aound to get the barrel floated again, is there an easier way to put it back together the right way , i seem to always have a problem with the barrel not being floated properly, and the floor plate not latching 100%
|
I would hold the presses right there then. The cure to your barrel channel woes is to have the action properly bedded in the stock. While it is there for that treatment have the smith take a mill to that trigger and properly fit it. Win win.
Or tackle it yourself with a little help here. Either way it would benefit greatly from a bedding job.
http://www.24hourcampfire.com/ubbthr...vy#Post3003214
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-14-2010, 09:05 PM
|
|
|
Join Date: Mar 2008
Location: Alberta
Posts: 4,279
|
|
I have installed a handful of timneys on the Rugers. The first one you are worried about wrecking something, then they are easy. As Chuck and the instructions say, file the trigger - NOT the safety. They wont sell you a safety - you need to send the rifle in to have them install it.
|
05-14-2010, 09:33 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
Quote:
Originally Posted by chuck
I would hold the presses right there then. The cure to your barrel channel woes is to have the action properly bedded in the stock. While it is there for that treatment have the smith take a mill to that trigger and properly fit it. Win win.
Or tackle it yourself with a little help here. Either way it would benefit greatly from a bedding job.
http://www.24hourcampfire.com/ubbthr...vy#Post3003214
|
is there anyone around here that you would recommend, and what am i looking at for cost?
|
05-14-2010, 09:43 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
Call Mitch Kendall in Kamloops and ship the rifle to him. I would imagine $125 would cover the works.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-14-2010, 10:19 PM
|
|
|
|
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
|
|
Quote:
Originally Posted by chuck
Call Mitch Kendall in Kamloops and ship the rifle to him. I would imagine $125 would cover the works.
|
thats not bad, thanks for the help and i have the trigger in now and it works awesome, my factory one was set at 8.5lbs and now i have this one just under 4, big difference.
|
05-14-2010, 10:27 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
I'll say!
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
05-15-2010, 08:52 AM
|
|
|
|
Join Date: Aug 2007
Location: Lethbridge
Posts: 1,309
|
|
If you need a hand bedding your ruger I'm happy to help.
__________________
"I find it amazing that we, as a society, find it so easy to view the perpetrators of crime with an understanding and knowing that they are suffering from the frailties of being a human being yet we cannot seem to extend that same courtesy to the very people we ask to face, on a daily basis, the worst that mankind has to offer."
-Dave (Whiskey Wish)-
|
05-15-2010, 08:55 AM
|
|
|
Join Date: May 2007
Posts: 7,720
|
|
8lbs!!! Wow...it amazes me how some people can actually stand to shoot a trigger from the factory like that.
Good on ya for getting it swapped over and adjusted nicely. I find 4lbs a bit heavy, but compared to 8 it should feel amazing!
TangoKilo is great with guns and if you wanted it bedded I'm sure he'd do a great job for ya.
|
05-15-2010, 09:07 AM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
Agreed. I'd jump all over that offer!
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:16 PM.
|