 |
03-31-2012, 11:21 PM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
?Arrow Spine?
would the wrong arrow spine make your shot up to two feet off at 20 yards! im using a 400 spine right now but since i had got i new bow (mamba m7) i cant shoot a three arrow group at a foot so i was wondering if the shaft woule make it shoot that different? i think if so i need to get a 340 spine arrow.
|
04-01-2012, 07:24 AM
|
|
|
|
Join Date: Oct 2009
Posts: 34
|
|
It probably could check that your fletching is clear cables rest etc. maybe try paper tuning it there could be problems else where that paper tuning could make more apparent
|
04-01-2012, 07:39 AM
|
|
|
|
Join Date: Jan 2012
Posts: 135
|
|
What's your draw wieght, length of arrow, how many grain tip are you using.
I shoot a Viper V7 at 70lbs, 30" arrow, 125grain tip and had to go from a 340 to a 300. Try pulling them suckers out of a target. Can't wait see what it does to an animal.
|
04-01-2012, 08:29 AM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
Im shooting a mamba m7 at 63 pounds , 27" draw length , and 100 grain tips oh and also thanks for the replies
|
04-01-2012, 08:34 AM
|
|
|
|
Join Date: Jan 2012
Posts: 135
|
|
They should work for you. Have you tried paper tuning, walk back or bare shaft tuning. Arrow rest square. Proper clearance with fletching. I could go on and on. Be to go see the dealer you bought it from.
|
04-01-2012, 08:40 AM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
yes i think im going to take it back their today and get it looked over hope a can getter shooting good.
|
04-01-2012, 08:51 AM
|
|
|
|
Join Date: Jan 2012
Posts: 135
|
|
Maybe cams are out of tune. After 100 shots your sopposed to check for cam lean, and proper timing. I know my v7 was out of wack.
|
04-01-2012, 10:44 AM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
well the lines they put on the cams are still even with the cables and i have probably only sho it about 30 times
|
04-01-2012, 01:39 PM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
I have got the bow shooting better now shooting five arrows at the target and can shot a 3" group with 3 arrows and the about 2 feet up illl group 2 other arrows side by side. You ll shoot the five arrows and you wont shoot three in the bullseye and the 2 two feet high they are out of order one will be in the bullseye the next will be the two feet high. so i was wondering what is going on? ive been trying to figure it out but i cant so please reply if you can help.
|
04-01-2012, 02:16 PM
|
|
|
|
Join Date: Jan 2012
Posts: 135
|
|
Are punching the trigger, maybe you have target panic?
|
04-01-2012, 03:46 PM
|
 |
|
|
Join Date: Jan 2010
Location: Rimbey
Posts: 866
|
|
What kind of rest are you using?
|
04-01-2012, 04:22 PM
|
 |
|
|
Join Date: Oct 2008
Location: Edmonton
Posts: 2,751
|
|
Maybe your torquing your bow? Or dont anchor to the same point every shot?
I know I started to hold my bow different with just the flesh of my thumb and when at full draw I bend my elbow out a bit so im not hyper extending my arm and it brought my arrows from being all over at 20 yards to shooting 3 arrows touching each other.
You may already know those tips, if not try it! Also check the tuning of your bow like everyone else said, may not be your arrow. Or if you shoot with a d-loop maybe its too high when compared to your rest or too low I know the guy at cabelas checked that for me and brought me back to shooting good groups.
|
04-01-2012, 05:41 PM
|
|
|
|
Join Date: Oct 2011
Posts: 80
|
|
Quote:
Originally Posted by ViperV7
Maybe cams are out of tune. After 100 shots your sopposed to check for cam lean, and proper timing. I know my v7 was out of wack.
|
well after you had said that i had started to look and since you said a 100 shots i wasnt so worried but i looked anyways and after 30 shots had found my cams out of time and they are leaning really bad and as you said the bow is just out of wack! but thanks for all your guys tips im going tomorrow to get it all fixed and hope it shoots after that!
|
04-01-2012, 07:29 PM
|
|
|
|
Join Date: Jan 2012
Posts: 135
|
|
There really ease to tune, I dont even use a press or the pin to adjust cam lean. And thats the glory of an APA. And if you learn how to do it you get a better understanding of your bow. And gives you more confidents.
|
05-26-2014, 08:56 PM
|
|
|
|
Join Date: Jan 2013
Location: edmonton alberta
Posts: 89
|
|
if after you re tune your bow it could possably be your arrows. mark them and see if you have the same ones hitting off or poor shots with the same its time for new ones. the other idea is try rotating your fletching on said arrows and re test. just my two sense
|
05-27-2014, 01:22 AM
|
 |
|
|
Join Date: Aug 2011
Posts: 5,169
|
|
Get the bow tuned, if it still happens it could be inconsistent arrows, mark them 1-5 to check if its the same arrows going off.
I also have this problem every spring. For me its grabbing the bow on release instead of just letting it shoot with a loose grip and proper follow through. Goes away with a couple weeks of practice and a lot of focus on form.
__________________
“Nothing is more persistent than a liberal with a dumb idea” - Ebrand
|
05-27-2014, 08:27 AM
|
 |
|
|
Join Date: Dec 2012
Location: Wainwright
Posts: 4,499
|
|
 Im betting on rest and form [hand torque] ...two feet is drastic...
Neil
__________________
 APA AIR
|
05-27-2014, 08:38 AM
|
 |
|
|
Join Date: Dec 2010
Location: Look behind you :)
Posts: 27,782
|
|
Quote:
Originally Posted by L.O.S.T.Arrow
Im betting on rest and form [hand torque] ...two feet is drastic...
Neil |
I agree....there has to be some contact with the rest there.
LC
__________________
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:13 PM.
|
Linear Mode
