Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-25-2020, 06:52 PM
Northern Canuck Northern Canuck is offline
 
Join Date: Apr 2009
Location: Deloraine, MB
Posts: 85
Default 303 savage hunting load developement

Has anyone had much experience with loading 180-190 gr bullets in the 303 savage? I am presently working on a 160 gr Hornady FTP pushed with 33.5, 34, 34.5 grains of Leverlution. I would like to get my hands on .308 190 gr Barnes Originals (30-30) for a hunting load.
I am pulling my Grandfather's old model 1899 out of the safe for the whitetail season this fall.
Reply With Quote
  #2  
Old 03-26-2020, 07:07 PM
1899b's Avatar
1899b 1899b is offline
 
Join Date: Oct 2009
Location: Sherwood Park Ab
Posts: 6,279
Default

Have always stuck with 170 grain flat points and 30 grains of IMR3031.
Could never find 180 or 190 grain billets at the time...
__________________
An awful lot of big game was killed with the .30-06 including the big bears before everyone became affluent enough to own a rifle for every species of game they might hunt.
Reply With Quote
  #3  
Old 03-28-2020, 09:42 PM
303carbine 303carbine is offline
 
Join Date: Aug 2008
Location: Vancouver Island ,BC
Posts: 714
Default

Quote:
Originally Posted by Northern Canuck View Post
Has anyone had much experience with loading 180-190 gr bullets in the 303 savage? I am presently working on a 160 gr Hornady FTP pushed with 33.5, 34, 34.5 grains of Leverlution. I would like to get my hands on .308 190 gr Barnes Originals (30-30) for a hunting load.
I am pulling my Grandfather's old model 1899 out of the safe for the whitetail season this fall.
Slug your bore to see what diameter you have, some of the older 303 Savages were actually .311 diameter, later versions were .308 diameter.
If you have one that has a .311 bore, you can shoot bullets designed for the 303 British, they have .311 and .312 diameter bullets.
Reply With Quote
  #4  
Old 03-29-2020, 01:26 AM
Dean2's Avatar
Dean2 Dean2 is offline
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,965
Default

Quote:
Originally Posted by 303carbine View Post
Slug your bore to see what diameter you have, some of the older 303 Savages were actually .311 diameter, later versions were .308 diameter.
If you have one that has a .311 bore, you can shoot bullets designed for the 303 British, they have .311 and .312 diameter bullets.
The 303 Savage was never made with any bore other than .308. Some ammo makers loaded slightly over sized cast bullets bullets to get a good bore seal with the soft lead bullets but no jacketed bullet over .308 should be used in one.

The 303 Savage has slightly better ballistics than the 30-30 but primarily because you can use pointed bullets in the Savage rotary magazine. For best performance stick to 130-150 grain SP Interlock or other thin skinned cup and core bullets. The relatively low velocity of this cartridge, about 2400 FPS with a 150 grain but only about 2000 with a 170, is not well suited to Mono bullets unless you can find a spire point specifically designed for lower velocities. There are lots of loads for it using a wide variety of powders, check Lyman, old Speer and Sierra books, old Hornady too. Basically 30-30 loads are a very good starting point.

You can buy 303 Savage Brass from Privi and a few other specialty makers but it can be really hard to find. Rusty Wood and Tradex were the last two places I got some. If you have to you can form 303 brass from 30-30, 32 Special and 38-55 brass. The web area of the 303 brass is larger so you may lose a few fire forming with light loads of Trail Boss. The Savage 99 is a fairly strong action but it is still a lever. Locking one up from loading too heavy is a REALLY bad idea. Back off as soon as any signs of pressure appear.
Reply With Quote
  #5  
Old 03-29-2020, 07:42 AM
Pioneer2 Pioneer2 is offline
 
Join Date: Jan 2008
Posts: 4,336
Default bore size

The early ones were .311 that were sent for army trials according to Ken Waters . He never saw one but the commercial ones may have all been .308 after the military gun was rejected.Should all be 1-10" twist for the 190gr offering.He has this same thread with lots of answer in CGN's.
Reply With Quote
  #6  
Old 03-29-2020, 09:38 AM
Dean2's Avatar
Dean2 Dean2 is offline
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,965
Default

Quote:
Originally Posted by Pioneer2 View Post
The early ones were .311 that were sent for army trials according to Ken Waters . He never saw one but the commercial ones may have all been .308 after the military gun was rejected.Should all be 1-10" twist for the 190gr offering.He has this same thread with lots of answer in CGN's.
Well, the reason Ken Waters has never seen one is because they were never made. In 1892, a prototype of what was known as the Savage No. 1 with a 29-inch barrel and full-length stock was submitted to the Ordnance Trials for the military market. When the bolt action Krag was adopted over the other submissions, Savage modified the rifle for civilian use and produced the model 1895. The model 1892 was never produced or sold. Thus, the original version of the Savage 99 was designated the Model 1895 and were actually made for Savage by Marlin. The only cartridge it came in was the 303 Savage. If you find a true 1895 in any other cartridge it is a later conversion, many of which were done by Savage as they offered a $5 upgrade of the 1895 to 1899 specifications. When the 1899 model came out there was a greatly expanded range of cartridges made available.
Reply With Quote
  #7  
Old 03-29-2020, 11:41 AM
Pioneer2 Pioneer2 is offline
 
Join Date: Jan 2008
Posts: 4,336
Default The early guns

went to the Montreal Home Guard ,full wood with bayonet.
Reply With Quote
  #8  
Old 03-29-2020, 11:59 AM
Pioneer2 Pioneer2 is offline
 
Join Date: Jan 2008
Posts: 4,336
Default data

https://www.handloadermagazine.com/303-savage
Reply With Quote
  #9  
Old 03-29-2020, 12:02 PM
Pioneer2 Pioneer2 is offline
 
Join Date: Jan 2008
Posts: 4,336
Default history

https://joesalter.ca/products/savage...real-homeguard
Reply With Quote
  #10  
Old 03-29-2020, 12:39 PM
Dean2's Avatar
Dean2 Dean2 is offline
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,965
Default

Quote:
Originally Posted by Pioneer2 View Post
Yes, there were versions of the 1895 and 1899 that were configured and sold to a number of different military units around the world. All of those that were 303 Savage were .308 bore too. It was the original 1892 version, a collaboration between Savage and Colt, submitted for the U.S. military trials that was never produced. If you read the link to the article you posted yourself, it clearly states the guns were never made with a .311 bore.

All in however this is becoming how many angels can dance on the head of a pin. The OPs gun will be .308 for sure and his question was about using heavier bullets, so my advice remains, 130-150 will work a lot better on game.
Reply With Quote
  #11  
Old 03-29-2020, 02:21 PM
Pioneer2 Pioneer2 is offline
 
Join Date: Jan 2008
Posts: 4,336
Default never wrong r u

Ideal book # 22 contains a statement that " the original size of the .303 Savage barrel was .303" in the bore ,taking .311 bullets,but went on to say that they " have been changed to .300 [.30 caliber] ,and use a bullet .308". Argue with them.
Reply With Quote
  #12  
Old 04-01-2020, 05:08 PM
Northern Canuck Northern Canuck is offline
 
Join Date: Apr 2009
Location: Deloraine, MB
Posts: 85
Default

My 1899 was made in 1911 according to the serial number. We have slugged the barrel and it is indeed a .308 bore. I do have a descent 160 grain Hornady FTP load just was trying the 190 to match the factory ammo. Not going to hunt with it all the time, just a nostalgic hunt in the same area my Granfather hunted.
Thanks for the info.
Reply With Quote
  #13  
Old 04-01-2020, 05:55 PM
Dick284's Avatar
Dick284 Dick284 is offline
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,585
Default

If you want heavier than 170gr.

Why not try these?

https://www.sierrabullets.com/produc...-mm-180-gr-rn/
__________________


There are no absolutes
Reply With Quote
  #14  
Old 04-02-2020, 07:35 PM
Northern Canuck Northern Canuck is offline
 
Join Date: Apr 2009
Location: Deloraine, MB
Posts: 85
Default

Just loaded up some Barnes 190 Original FP bullets with Leverlution powder. Now just have to get to the range to try them out.
Reply With Quote
  #15  
Old 04-04-2020, 09:02 AM
Dean2's Avatar
Dean2 Dean2 is offline
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,965
Default

Quote:
Originally Posted by Northern Canuck View Post
Just loaded up some Barnes 190 Original FP bullets with Leverlution powder. Now just have to get to the range to try them out.
So what I am not following is why the FP and RN bullets. The whole advantage to the Savage 99 is being able to shoot Spire Point bullets with their much superior B.C.s. Even if you want to use heavy bullets I would suggest looking at something with a Spire point and thin jacket.

That aside, would still be interested to hear how the Barnes shoot and what kind of speed you are getting out of them.
Reply With Quote
  #16  
Old 04-08-2020, 08:07 AM
marxman's Avatar
marxman marxman is offline
 
Join Date: Feb 2013
Posts: 1,844
Default

The 303 is too long to fit pointed bullets. Only my blunt leverevolution bullets can fit the mag without the ogive being inside the neck. The 303 is substantially longer than the 300 savage
Reply With Quote
  #17  
Old 04-13-2020, 08:55 AM
Northern Canuck Northern Canuck is offline
 
Join Date: Apr 2009
Location: Deloraine, MB
Posts: 85
Default

I tried out my test loads on the weekend.

The 160 Hornady FTP seated with the cannelure at the end of the brass just fit in the magazine. They did not feed well when levering them in as the flexible point would catch on the ramp. Didn't spend much time on them as I wouldn't want the hassles while hunting.

190 grain FP Barnes Originals worked very well. Looks like 36 To 36.5 grains of Leverlution might be the sweet spot. I haven't ran any of those through the chronograph yet but that will be the next step. These feed into the chamber very well as they should.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.