Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2008, 11:46 AM
TheClash's Avatar
TheClash TheClash is offline
 
Join Date: Oct 2007
Location: Pheasant heaven....Magrath.
Posts: 5,424
Default gevarm .22LR

ok all you gun guys out there...help me out...my brother inlaw just inherited a gevarm .22lr from his grandpa....and it is missing the front sights as well as the magazine. anyone give me some solid leads on where to look for them. anyone have any history etc. on these rifles?..i know it is french...and i am actually pretty impressed with the rifle...very solid feel....great trigger. would love to get it in working condition for him. anyone know if a different brand of magazine will work in that rifle? is that a dangerous way to go about it??

thanks all.
Reply With Quote
  #2  
Old 11-06-2008, 11:50 AM
Leverboy Leverboy is offline
Banned
 
Join Date: May 2008
Posts: 309
Default

Western Gun parts on the west end of Edmonton. They only take cash or credit card. No debit
Reply With Quote
  #3  
Old 11-06-2008, 12:25 PM
TheClash's Avatar
TheClash TheClash is offline
 
Join Date: Oct 2007
Location: Pheasant heaven....Magrath.
Posts: 5,424
Default

do they have a website?


nvmd...called them, they are out...guess the search begins...
Reply With Quote
  #4  
Old 11-06-2008, 02:50 PM
Roadhunter's Avatar
Roadhunter Roadhunter is offline
 
Join Date: May 2007
Location: Red Deer River Valley
Posts: 211
Default Gevarm

Hey Clash, Is it a Semi Auto? They are scary as hell as when the bolt is open that's when they are ready to fire! I have one and it's kind of unnerving when you realize how they operate compared to say a 10/22.
Reply With Quote
  #5  
Old 11-06-2008, 03:17 PM
TheClash's Avatar
TheClash TheClash is offline
 
Join Date: Oct 2007
Location: Pheasant heaven....Magrath.
Posts: 5,424
Default

yes it is a semi auto..and ya i have been reading some stuff about them..haha...and if i am not mistaken..there is no safety on this gun either??
Reply With Quote
  #6  
Old 11-06-2008, 05:34 PM
Grizzly Adams's Avatar
Grizzly Adams Grizzly Adams is offline
 
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
Default

Quote:
Originally Posted by TheClash View Post
yes it is a semi auto..and ya i have been reading some stuff about them..haha...and if i am not mistaken..there is no safety on this gun either??
Hey, it's French. For some reason they figure safeties are an unnecessary complication. . Been a long time, but seems to me the bolt handle pushes in as a safety. Pretty crude piece of artillery. Also easy to convert to FA, which might explain why it was discontinued.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
Reply With Quote
  #7  
Old 11-30-2014, 04:46 PM
HooterAb HooterAb is offline
 
Join Date: Jul 2014
Posts: 4
Default Gevarm Safety

Actually they have the most solid fool proof safety made....
Pull the bolt back slightly more than need to cook it & push the knob (handle) in..
= a solid dead bolt.
Wanna sell it.?
Reply With Quote
  #8  
Old 05-31-2014, 10:47 AM
Sashi's Avatar
Sashi Sashi is offline
 
Join Date: Jan 2014
Posts: 1,154
Default

Quote:
Originally Posted by Roadhunter View Post
Hey Clash, Is it a Semi Auto? They are scary as hell as when the bolt is open that's when they are ready to fire! I have one and it's kind of unnerving when you realize how they operate compared to say a 10/22.
I found these were one of the safest guns I ever own. Pull the clip and they were completely unloaded, slip in the clip and you were ready to start shooting. The also had a solid safety besides the above. Getting rid of the one I had was among the worst decisions I ever made.
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
Reply With Quote
  #9  
Old 06-14-2014, 04:00 PM
cantom cantom is offline
 
Join Date: Jan 2012
Posts: 10
Default

Quote:
Originally Posted by Sashi View Post
I found these were one of the safest guns I ever own. Pull the clip and they were completely unloaded, slip in the clip and you were ready to start shooting. The also had a solid safety besides the above. Getting rid of the one I had was among the worst decisions I ever made.
Well, it's not like they don't exist anymore. They are out there to buy.

Very unique rifles!
Reply With Quote
  #10  
Old 04-11-2010, 09:21 PM
gevarm222 gevarm222 is offline
 
Join Date: Apr 2010
Posts: 1
Default Carbide .222

I inherited a Gevarm 222 Carbide, no model #, no serial #
Stock is broken, anyone know how to get an aftermarket stock, and where?
Reply With Quote
  #11  
Old 01-07-2013, 11:36 PM
canadiannorm canadiannorm is offline
 
Join Date: Jan 2013
Posts: 1
Default

do you want to sell it? i am looking for some parts
Reply With Quote
  #12  
Old 01-08-2013, 10:04 AM
bigshell bigshell is offline
 
Join Date: Apr 2012
Location: east kootenay bc
Posts: 530
Default

Check at the gunshows you might find a magazine at one some day
__________________
"No I'm not a good shot,but I shoot often"

-Teddy Roosevelt
Reply With Quote
  #13  
Old 01-08-2013, 07:26 PM
couleefolk couleefolk is offline
 
Join Date: Dec 2010
Posts: 869
Default

my gevarm must be to new yet, i have yet to see a 10/22 that jams less than my gevarm, but that may also be because i refuse to run cheap ammo through my 22's, unlike most of the guys i have seen shooting 10/22s. same as the old victor i used to shoot with, it hated cheap ammo. i wish i could buy a more robust version of the gevarm's "shooting from the open bolt", mine has the weak receiver and i'm always scared of breaking it. nothing better than pulling out the clip and not having to worry about the loaded shell still in the chamber, or slipping the clip in and not having to worry about working the action. gotta love the way the breach block slams the whole back side of the shell! i know a few guys with gevarms, and no one will sell for less than $200. a few years ago i came across a website that said there was a fella in ?Australia? that was selling clips?
Reply With Quote
  #14  
Old 01-08-2013, 07:59 PM
traderal traderal is offline
 
Join Date: Dec 2010
Location: East Central AB
Posts: 1,112
Default

I have seen one in full auto long ago and it shoots 20 shots in about 1 second which makes it totally useless. If you want to eliminate stovepipes in these you open up the ejection port right over to the left side. Probably one of the simplest 22's you can own. The A3 model had a heavy barrel and is quite accurate.
Reply With Quote
  #15  
Old 11-30-2014, 04:54 PM
HooterAb HooterAb is offline
 
Join Date: Jul 2014
Posts: 4
Default

Good Day..
Any luck & which model is it..E1 A3 A6 or A7 ?
Any chances its up for sale as is.?
Reply With Quote
  #16  
Old 11-30-2014, 06:16 PM
CNP's Avatar
CNP CNP is offline
 
Join Date: May 2007
Location: WMU 303
Posts: 8,480
Default

Quote:
Originally Posted by HooterAb View Post
Good Day..
Any luck & which model is it..E1 A3 A6 or A7 ?
Any chances its up for sale as is.?

Who are you talking too? The original post is from 2008 and he has not signed onto the forum in over a year
Reply With Quote
  #17  
Old 04-12-2010, 08:31 AM
TangoKilo's Avatar
TangoKilo TangoKilo is offline
 
Join Date: Aug 2007
Location: Lethbridge
Posts: 1,308
Default

Quote:
Originally Posted by TheClash View Post
ok all you gun guys out there...help me out...my brother inlaw just inherited a gevarm .22lr from his grandpa....and it is missing the front sights as well as the magazine. anyone give me some solid leads on where to look for them. anyone have any history etc. on these rifles?..i know it is french...and i am actually pretty impressed with the rifle...very solid feel....great trigger. would love to get it in working condition for him. anyone know if a different brand of magazine will work in that rifle? is that a dangerous way to go about it??

thanks all.
Clash good buddy,

As much fun as it is to get an old gopher killer back into action. I think that the appropriate course of action is for you to take your BIL down to wholesale sports and both of you buy NEW Ruger 10/22's!!

YAY
__________________
"I find it amazing that we, as a society, find it so easy to view the perpetrators of crime with an understanding and knowing that they are suffering from the frailties of being a human being yet we cannot seem to extend that same courtesy to the very people we ask to face, on a daily basis, the worst that mankind has to offer."
-Dave (Whiskey Wish)-
Reply With Quote
  #18  
Old 04-12-2010, 08:44 AM
honda450's Avatar
honda450 honda450 is offline
 
Join Date: Jun 2007
Location: Parts Unknown
Posts: 6,952
Default

I had an old clunker of a 22 one time don't even remember what brand it was some hand me down that was so wore out ya just would have to tap the side of it and it would go off. I burnt it.
__________________
Smoke or Fire in the Forest Dial 310-FIRE


thegungirl.ca @gmail.com
Reply With Quote
  #19  
Old 04-13-2010, 12:32 AM
CR5 CR5 is offline
 
Join Date: Apr 2010
Location: West of Edmonton AB
Posts: 167
Default

I have one and it shoots really well. The hot bolt set-up is kinda weird but that raised ridge that runs down the bolt face is your firing pin so it creases the entire back end of the case, I have never had a round not go off when I pull the trigger. I have even taken the shells my buddies 10-22's and others FTF and run them through it (probably not the best thing to do but I had to see if it would work) and it fires them first try. The only bad thing about it is the lack of an extractor, mine gives me a lot of stove pipe jams. I have the iron sights on it and it shoots well with them but I put a cheap little scope on it using the narrow rail that's machined into the top and it is great. Mine breaks in two if you remove the bolt in the end of the foregrip and holds zero when re-assembled. I only have 1 mag for it and have never come across any to buy.
I have to agree with tangokilo, for the cost of a 10/22 or some of the others out there I would just buy something you can easily get parts and mags for. It's a neat gun but not the greatest design and ejection reliability is kinda low. I think they used to make 15 or 20 round mags for it but good luck finding one.
I replaced mine with a Rem 597 VTR and after installing a Volquartzen extractor and an M4 6 position stock I am very happy with it.

Good luck whichever route you take.
Reply With Quote
  #20  
Old 04-13-2010, 04:42 AM
Chargerguy Chargerguy is offline
 
Join Date: Aug 2008
Location: Edmonton Area
Posts: 256
Default

Quote:
Originally Posted by CR5 View Post
I have one and it shoots really well. The hot bolt set-up is kinda weird but that raised ridge that runs down the bolt face is your firing pin so it creases the entire back end of the case, I have never had a round not go off when I pull the trigger. I have even taken the shells my buddies 10-22's and others FTF and run them through it (probably not the best thing to do but I had to see if it would work) and it fires them first try. The only bad thing about it is the lack of an extractor, mine gives me a lot of stove pipe jams. I have the iron sights on it and it shoots well with them but I put a cheap little scope on it using the narrow rail that's machined into the top and it is great. Mine breaks in two if you remove the bolt in the end of the foregrip and holds zero when re-assembled. I only have 1 mag for it and have never come across any to buy.
I have to agree with tangokilo, for the cost of a 10/22 or some of the others out there I would just buy something you can easily get parts and mags for. It's a neat gun but not the greatest design and ejection reliability is kinda low. I think they used to make 15 or 20 round mags for it but good luck finding one.
I replaced mine with a Rem 597 VTR and after installing a Volquartzen extractor and an M4 6 position stock I am very happy with it.

Good luck whichever route you take.

Sounds like an E1
Reply With Quote
  #21  
Old 04-14-2010, 05:30 PM
Gonehuntin''s Avatar
Gonehuntin' Gonehuntin' is offline
 
Join Date: Oct 2008
Location: Central AB
Posts: 398
Default

I just ordered 2 mags from W.G.P yesterday, appaqrently there are still some in stock. Probably not for long though. They are supposedly " gunsmith fitting required". Hope they work...........for nearly $50 each.
Reply With Quote
  #22  
Old 04-18-2010, 09:23 PM
ksteed17's Avatar
ksteed17 ksteed17 is offline
 
Join Date: Dec 2007
Location: Raymond
Posts: 1,485
Default

Quote:
Originally Posted by TangoKilo View Post
Clash good buddy,

As much fun as it is to get an old gopher killer back into action. I think that the appropriate course of action is for you to take your BIL down to wholesale sports and both of you buy NEW Ruger 10/22's!!

YAY
why put good money into a 10/22 when that old gun would outshoot, and never jam up
Reply With Quote
  #23  
Old 04-20-2010, 04:10 PM
CR5 CR5 is offline
 
Join Date: Apr 2010
Location: West of Edmonton AB
Posts: 167
Default

Quote:
Originally Posted by ksteed17 View Post
why put good money into a 10/22 when that old gun would outshoot, and never jam up
Mine shoots well but I would not even compare it to a 10/22 or the rem 597.
My gevarm usually has at least one stovepipe failure for every mag I put through it.
The accuracy is decent but I don't remember ever being able to make the same kinds of groups I can with my 597VTR.

For $200 for a new 10/22 or 597 and $25-$30 for a 25-30 round mag compared to $50 for a 9 round mag I would buy a new one.

Add to this the aftermarket parts and accessories available for either of those and it's hard to justify spending any money on an old gevarm.

Just my opinion,
Reply With Quote
  #24  
Old 11-30-2014, 04:49 PM
HooterAb HooterAb is offline
 
Join Date: Jul 2014
Posts: 4
Default

Still have & wanna sell it..Ken here from west of Edmonton
Reply With Quote
  #25  
Old 11-30-2014, 06:55 PM
22restorer 22restorer is offline
 
Join Date: Jan 2014
Posts: 27
Default

check with numrich gun parts
Reply With Quote
  #26  
Old 11-30-2014, 07:15 PM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,835
Default

A friend has one, and when you squeeze the trigger, it may fire one round, or it may fire a three or four round burst. It has been cleaned thoroughly, but it still does it now and then, usually two or three bursts out of a box of ammunition.
__________________
Only accurate guns are interesting.
Reply With Quote
  #27  
Old 03-01-2016, 11:58 AM
Damon.madoche Damon.madoche is offline
 
Join Date: Mar 2016
Posts: 1
Default

if anybody is willing to sell a 8-20rd gevarm a-6 Factory mag. around Edmonton ill pay cash for them. I have bought the aftermarket ones but they just jam.

fabcore_welding@yahoo.ca
Reply With Quote
  #28  
Old 03-02-2016, 10:19 AM
bobly bobly is offline
 
Join Date: Jun 2010
Posts: 173
Smile Gevarm safety

The Model E1 has a safety. You have to pull the bolt way back so that the operating handle will slip into the safety hole drilled in the receiver. Very positive lock for the action.
Reply With Quote
  #29  
Old 05-31-2014, 04:48 AM
cantom cantom is offline
 
Join Date: Jan 2012
Posts: 10
Default

Western Gun Parts sells new 8 rd and 15 rd Gevarm mags that will fit both A series and E series guns. I was very happy to see that someone understood that the E series (takedown) guns use a mag with a wider nose and those 20 round factory mags will not fit an A series gun, because they have the wide nose. The A series guns will only accept the 8 round mags with the narrow nose.

So WGP's new mags have the narrow nose and will fit either series. That is the good news.

Sadly though, I tried 2 of the 15 rounders and neither would work...at all. As in a dismal failure. Jams and stovepipes.

Has anyone tried either the 8 or the 15 rounders and had any luck with them? I've been hoping they'd improve them.

The mags are made by Triple K in California.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:18 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.