Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #151  
Old 12-20-2020, 11:12 AM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

Quote:
Originally Posted by darren32 View Post
What does the purple cup do?
It’s a 3D printed powder cup. It has a neat innovation on the inside bottom of the cup. There is an elevated almost “V”, that comes up from the outside wall. It tends to spread the powder towards the interior wall. Instead of letting it “bounce” and possible spill outside the cup. It’s meant for fast throwers.
Reply With Quote
  #152  
Old 12-20-2020, 12:16 PM
prarie_boy1 prarie_boy1 is offline
 
Join Date: Jul 2009
Posts: 487
Default

Quote:
Originally Posted by chuck View Post
Loading up some 200gr partitions for velocity/pressure testing in my 30-06


Chuck what powder are you using with the 200g pills?
Reply With Quote
  #153  
Old 12-20-2020, 12:17 PM
Pathfinder76 Pathfinder76 is online now
 
Join Date: May 2007
Posts: 16,281
Default

I’m trying RL26.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #154  
Old 12-20-2020, 01:43 PM
kujoseto's Avatar
kujoseto kujoseto is offline
 
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
Default

Quote:
Originally Posted by prarie_boy1 View Post
Chuck what powder are you using with the 200g pills?

Quote:
Originally Posted by chuck View Post
I’m trying RL26.


Hopefully we see another thread with this breakdown.
Seems like a great bullet for the trusty ol aught six and not often discussed.
Different rifle than the one running 168 Barnes?
Reply With Quote
  #155  
Old 12-20-2020, 01:44 PM
darren32's Avatar
darren32 darren32 is offline
 
Join Date: Mar 2011
Location: Edmonton
Posts: 1,015
Default

Quote:
Originally Posted by 6MT View Post
It’s a 3D printed powder cup. It has a neat innovation on the inside bottom of the cup. There is an elevated almost “V”, that comes up from the outside wall. It tends to spread the powder towards the interior wall. Instead of letting it “bounce” and possible spill outside the cup. It’s meant for fast throwers.
Thanks for the info.
That is interesting.
Reply With Quote
  #156  
Old 12-20-2020, 02:02 PM
Pathfinder76 Pathfinder76 is online now
 
Join Date: May 2007
Posts: 16,281
Default

Quote:
Originally Posted by kujoseto View Post
Hopefully we see another thread with this breakdown.
Seems like a great bullet for the trusty ol aught six and not often discussed.
Different rifle than the one running 168 Barnes?
Same one.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #157  
Old 12-20-2020, 02:42 PM
pavilion pavilion is offline
 
Join Date: Mar 2009
Location: Medicine Hat
Posts: 126
Default

Didn't get up to much in my little Harry Potter reloading closet but cleaned up some junk I had laying around, need to get around to figuring out my little husky 308 to see if I can get better than 6 moa out of it

Sent from my SM-A205W using Tapatalk
Reply With Quote
  #158  
Old 12-20-2020, 07:16 PM
no-regard's Avatar
no-regard no-regard is offline
 
Join Date: Dec 2012
Posts: 694
Default

I loaded 30 rounds of 80gr Berger flat base varmint, to try out in a .243, going to try H4831sc and CCI 200s.

I picked a low/mid charge from the berger data to start, paired with a range of seating depths.

Shortly after finishing I remembered that I wanted to do single rounds with different charges, in a ladder of sorts, to start the development. Dang.
Reply With Quote
  #159  
Old 12-20-2020, 08:10 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

Whew, I was busy today. Well...it started yesterday.

228 cases in the wet tumbler for 2 hours.



Then, on the drying tray for another couple of hours.



First I loaded 5 cases of range pick-up 6.5CM. Then I started in on the first hundred cases of .44mag. First, sizing to bring them back to spec. Then, trimming. A crucial step that shows up later in the loading process. (Is that gold dust?)



Priming is next. I use my Co-Ax press to prime with. I’ve used hand primers before. But when one failed on me the night before a competition, I decided to try the press. And I haven’t looked back since.



Charge the cases. Self-explanatory.



Then, time to flare the opening of the cases to accept the bullets for seating.



Seating the bullet is next. OAL should be 1.6010”.



And finally, crimping the neck so the bullet doesn’t move in the case. Crimping is why the case length is so important.



While my passion is extreme distance shooting with bottle neck cases, I have come to really enjoy loading straight walled cased cartridges like the pistol calibers for lever action rifles. With a new rifle and new caliber arriving this week, I’m really looking forward to rolling up some 45-70’s over the holidays.
Reply With Quote
  #160  
Old 12-20-2020, 08:12 PM
Cement Bench's Avatar
Cement Bench Cement Bench is offline
 
Join Date: Apr 2008
Location: alberta
Posts: 2,043
Default

Quote:
Originally Posted by 6MT View Post
It’s a 3D printed powder cup. It has a neat innovation on the inside bottom of the cup. There is an elevated almost “V”, that comes up from the outside wall. It tends to spread the powder towards the interior wall. Instead of letting it “bounce” and possible spill outside the cup. It’s meant for fast throwers.
any idea where to buy those in a different colour?
Reply With Quote
  #161  
Old 12-20-2020, 08:14 PM
Pathfinder76 Pathfinder76 is online now
 
Join Date: May 2007
Posts: 16,281
Default

Quote:
Originally Posted by Cement Bench View Post
any idea where to buy those in a different colour?
They are not offered for sale.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #162  
Old 12-22-2020, 10:41 AM
jayquiver jayquiver is offline
 
Join Date: Nov 2011
Location: Calgary, AB
Posts: 824
Default

A new (to me) purchase, Kimber Montana in 7mm-08 inspired me to unpack my reloading boxes. Even found some old Nosler brass for it.
Just need to iron out placement and flow of the reloading bench in my new home in Calgary.
Looking forward to reloading more in 2021!







Sent from my iPhone using Tapatalk
Reply With Quote
  #163  
Old 12-22-2020, 12:39 PM
freeride freeride is offline
 
Join Date: Apr 2012
Posts: 1,058
Default

Loaded up a bunch yesterday for my 45/70. I was having trouble getting a good group with the factory hornady stuff and light trailboss loads. I adjusted a bit on how I hold a lever action and tried some reloader 7... I am happy!

Of course I am going to play with it a bit just because... but so far very happy.

5 shot group using my backpack as a rest because that's all I had out there.
Attached Images
File Type: jpg 20201222_123857.jpg (41.8 KB, 41 views)
Reply With Quote
  #164  
Old 12-22-2020, 12:52 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

What is your load for your 45-70?
Reply With Quote
  #165  
Old 12-22-2020, 01:06 PM
freeride freeride is offline
 
Join Date: Apr 2012
Posts: 1,058
Default

I am just started to work up a lighter load. I dont need to break my shoulder firing, i figure if it killed buffalo it should be good for everything here...

That was
40.0 reloader 7
Starline brass
Campro 405 bullet
Fed large rifle regular primers

39.0, 39.5 all grouped very close to this as well.
Reply With Quote
  #166  
Old 12-23-2020, 09:59 AM
Pathfinder76 Pathfinder76 is online now
 
Join Date: May 2007
Posts: 16,281
Default

A couple of complimentary parcels from Bighorn Sales and a dummy round. Good times ahead!

__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #167  
Old 12-23-2020, 10:14 AM
obsessed1 obsessed1 is offline
 
Join Date: Jan 2013
Posts: 2,989
Default

Loaded up a few 300wm for my brothers hunting rifle. 200 gr eldx over h1000. Boxed up a few parts and tool to sell/ give away
Reply With Quote
  #168  
Old 12-23-2020, 10:34 AM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 46,220
Default

I just went through my upland gear bag, and dug out all of the 28 gauge hulls to load. As is normal, every hull had accumulated bird feathers while sitting in my game bag. I also had a look at my empty 28 and 410 shotshell hulls, and I estimate I have about 4000 to load. After Christmas, I need to spend about eight loading sessions to get these loaded. A couple of days per week for a month, and I will be done.
__________________
Only accurate guns are interesting.
Reply With Quote
  #169  
Old 12-23-2020, 09:09 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

Another 100 rounds of .357mag. Yawn.
Reply With Quote
  #170  
Old 12-24-2020, 12:06 AM
WildBillG WildBillG is offline
 
Join Date: Apr 2019
Posts: 111
Default

I put away my powder purchase from Prophet River. Then with the dies I got from them and Grand Slam started to form some 358 Norma brass. I am to cheap to buy Norma brass so I am resizing 338 win Mag brass. I necked them up to 375 and then ran them through a 358 Norma full length die. Now I have a reason to get the 358 Norma barrel put on my 338.
Reply With Quote
  #171  
Old 12-24-2020, 08:29 AM
darren32's Avatar
darren32 darren32 is offline
 
Join Date: Mar 2011
Location: Edmonton
Posts: 1,015
Default

Loaded some 9mm for the boy.

We FINALLY found a load and spring combination that works for the little limp-wrister and his glock 48



Reply With Quote
  #172  
Old 12-24-2020, 09:03 AM
Bushrat's Avatar
Bushrat Bushrat is offline
 
Join Date: May 2007
Posts: 7,080
Default

Christmas Eve Morning 8:53am. So far have cleaned 7-08 and 308 Kimbers, cleaned receivers and retorqued bedding, cleaned 30-06 and 6.5 model 70's, loaded 20 rounds for each rifle last night. Thinking I might load some 270win and take one of them to the range too. Not many warm days this time of year and not likely to be busy at the range later today so it should be good.
Reply With Quote
  #173  
Old 12-24-2020, 10:26 AM
Redneck 7 Redneck 7 is offline
 
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
Default

Last night I put together a .308 rifle with some extra parts I had. Should be a great rifle for 600m and under, I cut the barrel to 18” and re crowned it. Also made a kydex cheek rise and got that all bolted on. Gonna relod some 178 gr hornady eld m and see if I can find a velocity node to start at.
__________________
Life’s a garden, Dig it! - Joe Dirt
Reply With Quote
  #174  
Old 12-24-2020, 06:58 PM
darren32's Avatar
darren32 darren32 is offline
 
Join Date: Mar 2011
Location: Edmonton
Posts: 1,015
Default

Quote:
Originally Posted by Bushrat View Post
Christmas Eve Morning 8:53am. So far have cleaned 7-08 and 308 Kimbers, cleaned receivers and retorqued bedding, cleaned 30-06 and 6.5 model 70's, loaded 20 rounds for each rifle last night. Thinking I might load some 270win and take one of them to the range too. Not many warm days this time of year and not likely to be busy at the range later today so it should be good.
Hope you had a good day

We took advantage of the warm weather and burned up a bunch of ammo today. The cycle continues LOL. The loaded stuff does not seem to last too log around here.

Now we are just waiting for Santa to come ... hopefully he brings powder!!



Reply With Quote
  #175  
Old 12-26-2020, 09:10 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

Out today doing some long range plinking and get a little bit of 80gr VLD therapy with my precision .223 build. I hadn’t shot it since my birthday in May. Just 7 misses out of 100 shots onto a 6” plate at 500m. It’s the gun with no recoil. A laser beam.

Anyways...back home to de-cap, tumble, dry, size, trim (actually none of them needed trimming), prime, charge, and seat. I got up to the charging step. I’ll continue in the morning. I have such a great load. Not only is it deadly accurate to a kilometre, but it’s easy on the rifle and brass. This batch of a hundred cases has now been fired 15 times and still has tight primer pockets. I love Lapua cases.

Last edited by 6MT; 12-26-2020 at 09:22 PM.
Reply With Quote
  #176  
Old 12-26-2020, 09:35 PM
Redneck 7 Redneck 7 is offline
 
Join Date: Feb 2014
Location: The best place on earth.
Posts: 1,665
Default

I pressed some 22-250 rounds tonight for my wife’s rifle, we’re planning on shooting shotguns and varmint rifles tomorrow. I also did a good cleansing and got rid of a bunch of boxes I’ve boarded from parts and accessories. Also organized my one shelf I store bullets and reloading components on, have it divided for handgun ammo and components. Rifle components and ammo, then carbine rifle ammo and components.
__________________
Life’s a garden, Dig it! - Joe Dirt
Reply With Quote
  #177  
Old 12-27-2020, 12:00 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,145
Default

Finishing seating this morning...

Reply With Quote
  #178  
Old 12-27-2020, 12:15 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,897
Default

I'll be heading in shortly to load some 155 308 and some 108 6mmmBR for my irons rifles for tomorrow, supposed to be nice so I'll be able to sling up in relative comfort!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #179  
Old 12-27-2020, 12:18 PM
duceman duceman is offline
 
Join Date: Aug 2008
Location: south of calgary
Posts: 1,847
Default

great few days cleaning and sorting. cataloguing components and guns for sale. could use some help valuing a couple mosins..............
__________________
220swifty

1. People who list their arguments in bullets points or numerical order generally come off as condescending pecker heads.

2. #1 is true.
Reply With Quote
  #180  
Old 12-30-2020, 01:11 PM
Pathfinder76 Pathfinder76 is online now
 
Join Date: May 2007
Posts: 16,281
Default

I’m loading up a small batch of offhand practice ammo. This may sound stupid, but I love the AMP for small batches. Just plug and play.

__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:45 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.