I have never tried this site, but I am assuming that it would work along a similar principle to my single pin HHA.
Site in 2 points and the rest should average out?
The thing is, even the HHA gives you about 50 different site tapes because they know that no 2 bows are ever going to be the same, nor 2 archers, arrows etc., so they give you a wide variety of "averages" to choose from.
The thing I don't know about the site in question, is which 2 pins do you use to get that average.
With the HHA single pin it recommends using 20 and 60 yard for "best" averages, but 20/40 will be "close".
With the React do you use top and bottom, and it adjusts the middle 1 or 3 pins? Or just set any 2 and hope for the best?
I guess the long and short of it is whenever you use something that works on "averages", you have to accept that the results are going to be "average" as well.
I can't complain about my HHA at all, but I will not deny a fixed pin that has been zeroed manually for each different range has always tended to be more reliable.
__________________
Where am I going? And why am I in this hand basket?
|