|
04-04-2010, 11:37 PM
|
|
|
Join Date: Mar 2009
Location: Calgary
Posts: 499
|
|
Variable scopes, where do you set the zoom level for the range?
I just put a new Bushnell Elite 3200 3-9 scope on my rifle. I have always (30+ years) shot with a non adjustable 4 power scope, and done very well.
I put 25 rounds through it this weekend and tended to leave the scope on 4 to 6X.
Do most of you have a preferred setting on the scope; do you power it up to high magnification, or leave it lower for some wiggle room for field situations as opposed to range shooting?
|
04-05-2010, 05:12 AM
|
|
|
Join Date: Jan 2009
Location: Brooks
Posts: 2,253
|
|
max it out
For shooting at the range, I tend to turn the magnification to full to get the full benefit of the scope. I want to make sure that I do everything I can to tune the gun and optics in at the bench.
Out in the field, I crank the optics down to a 4 so I can handle any close shots, whereas anything out-there a ways, you usually have time to turn it back up as needed.
__________________
"a gun without hammers is like a spaniel without ears!"
|
04-05-2010, 05:13 AM
|
|
|
Join Date: Aug 2008
Location: Sturgeon County AB
Posts: 441
|
|
I ahve a 6.5-20 on my Remington. At the range it doesnt go above 8x for shooting groups at 100 yards. On the coyote calling stand it stays on 6.5. I did crank it up to 15x on my longest hit on a coyote at 409 yards. Its nice to have the higher option.
|
04-05-2010, 05:51 AM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 46,136
|
|
At the range,I would be using the scope at 9x,but in the filed ,it would be at 3x.If the animal appears at close range,I can use 3x to make a quick shot,if it appears at long range,I usually have time to adjust the magnification.If you have the scope set at 9x,and an animal appears up close,you may not be able to find it in the scope,and lose a shot opportunity.
|
04-05-2010, 06:30 AM
|
|
|
|
Join Date: Feb 2009
Location: Ontario
Posts: 1,405
|
|
For sighting in at 100 yards I prefer about 10 power however it is easily done with less magnification.
I tend to adjust the magnification randomly as the range increase. My primary scope is a 1.75-6x32. When I make increase of power, it's not a "how far is that deer, 4 power is ideal" Its a "oh that deer is far, crank the power up(without looking at the settings) and shoot"
|
04-05-2010, 07:21 AM
|
|
|
|
Join Date: Feb 2010
Location: Sturgeon County, Ab.
Posts: 3,138
|
|
Quote:
Originally Posted by oldgutpile
for shooting at the range, i tend to turn the magnification to full to get the full benefit of the scope. I want to make sure that i do everything i can to tune the gun and optics in at the bench.
Out in the field, i crank the optics down to a 4 so i can handle any close shots, whereas anything out-there a ways, you usually have time to turn it back up as needed.
|
x2 :d
|
04-05-2010, 08:46 AM
|
|
|
|
Join Date: May 2007
Posts: 3,139
|
|
X3,
But be religious about cranking it back, being caught at close range at high power can be troublesome. Also learn what low power is by touch lots of scopes have a bump on the power adjustment ring. That way you can be sure on the way in in the AM your good to go.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:09 AM.
|