Anyone loaded 200 grain spitzers in 300WM using H1000

[Chukar Hunter]

Wondering what your accuracy node is at, what velocity are you getting and at what charge weight you hit pressure.

[Desert Eagle]

I would have to dig back into my notes. But yes, 200 grain partitions much under an inch at 200 yards with the combo. I believe velocity was 2940 average, which isn’t pushing it very hard, but it does shoot really well.

[Chukar Hunter]

Originally Posted by Desert Eagle

I would have to dig back into my notes. But yes, 200 grain partitions much under an inch at 200 yards with the combo. I believe velocity was 2940 average, which isn’t pushing it very hard, but it does shoot really well.

What charge, 79 grains? 26" pipe?

Thanks

[marky_mark]

I use 200 gr a frames with h1000 out of mine

2900 fps with 76.5gr of h1000
215m
Hornady brass

[Chukar Hunter]

Originally Posted by marky_mark

I use 200 gr a frames with h1000 out of mine

2900 fps with 76.5gr of h1000
215m
Hornady brass

That's a dandy combo Mark. I love the Swift A frames performance but not their BC. I am surprised you are getting that velocity with that charge. Well done.

I currently have a load with 75 grains of H4831SC and 200 AB's at 3,000 fps in to 3/4 MOA. I want to improve the group size and maintain the velocity. Seating depth change hasn't done much, ergo wanting to try H1000.

[marky_mark]

I could push it harder but this was super consistent for me
And it had the same point of impact as my load with 215 gr bergers
I used this on my Kamchatka moose hunt