|
11-15-2017, 09:07 PM
|
|
|
Join Date: Jul 2013
Posts: 48
|
|
Slugs
I have a Remington 870. Just wondering about what choke to use to shoot slugs through it. The most open choke I have for it right now is improved cylinder. Is that enough or do I need to invest in something even more open to make it work?
Thanks in advance for any advice you can offer.
|
11-15-2017, 09:11 PM
|
|
|
|
Join Date: Nov 2010
Location: Fort McMurray, AB
Posts: 2,515
|
|
NOT a ton of experience from me but I’ve shot lead foster slugs through full choke with no issues.
__________________
Be sure of your target and what lies beyond.
|
11-15-2017, 09:45 PM
|
|
|
|
Join Date: Feb 2012
Location: N. E. of High River
Posts: 4,985
|
|
Rifled slugs were are designed to safely pass though full choked guns. Since bores and chokes do not seem to be uniform, it is hard to tell which will preform the best without shooting.
|
11-16-2017, 08:38 AM
|
|
|
Join Date: Apr 2017
Posts: 86
|
|
My advice is to get a rifled slug barrel. I have an 870 also with the rifled slug barrel. 3 shots in 2 inch circle at 100 yards. Packs a heck of a punch!!
|
11-16-2017, 08:40 AM
|
|
|
|
Join Date: May 2007
Location: Edmonton, AB
Posts: 822
|
|
Is your rifled barrel have a cantilever scope mount. If so where did u get it. Am looking for one.
BH
__________________
Bad decisions make good stories.
|
11-16-2017, 08:51 AM
|
|
|
Join Date: Apr 2017
Posts: 86
|
|
I actually had the shotgun drilled and tapped for a normal scope rail. Cost 60 bucks i think.
|
11-16-2017, 09:32 AM
|
|
|
|
Join Date: Dec 2010
Location: Southern Alberta
Posts: 635
|
|
Improved Cylinder works holey wonders with slugs on the old 1187.
|
11-16-2017, 09:45 AM
|
|
|
|
Join Date: Dec 2012
Location: At the end of the Thirsty Beaver Trail, Pinsky lake, Alberta.
Posts: 25,282
|
|
I got a 590, run federal 2 3/4" rifles slugs through it, 2-3" groups at 100 yards.
__________________
Be careful when you follow the masses, sometimes the "M" is silent...
|
11-16-2017, 10:31 AM
|
|
|
|
Join Date: Oct 2009
Location: WMU 108
Posts: 2,482
|
|
How long of a barrel on these slug guns?
I have the Winchester SXP Defender that does not have a rifled barrel.
|
11-16-2017, 11:38 AM
|
|
|
Join Date: Mar 2011
Posts: 172
|
|
Where did you get a rifled slug barrel as I am looking for one for my 870?
|
11-16-2017, 11:38 AM
|
|
|
Join Date: Mar 2011
Posts: 172
|
|
Quote:
Originally Posted by Kenmore
I actually had the shotgun drilled and tapped for a normal scope rail. Cost 60 bucks i think.
|
Where did you get a rifled slug barrel?
|
11-16-2017, 11:45 AM
|
|
|
Join Date: Nov 2009
Location: Calgary
Posts: 1,700
|
|
Quote:
Originally Posted by Maghunter
Where did you get a rifled slug barrel?
|
You ever heard of this place??
https://www.cabelas.ca/category/slug-barrels/1034
__________________
You bet your ass I voted
|
11-16-2017, 12:19 PM
|
|
|
|
Join Date: May 2009
Location: Morinville
Posts: 1,316
|
|
Quote:
Originally Posted by Kenmore
My advice is to get a rifled slug barrel. I have an 870 also with the rifled slug barrel. 3 shots in 2 inch circle at 100 yards. Packs a heck of a punch!!
|
For sabot slugs not Foster
|
11-16-2017, 09:01 PM
|
|
|
|
Join Date: May 2007
Location: WMU 214
Posts: 1,835
|
|
Quote:
Originally Posted by Huntsman
For sabot slugs not Foster
|
Why not Foster in a rifled barrel ? Works fine.
Contrary to popular belief, the "rifled Slug" is not rifled to to produce a spin in the bore of a shotgun. As a matter of fact, anyone familiar with Internal Ballistics will know this. The Foster Rifled slug has rifling to produce a spin as it travels through air. Not the barrel. The slug DOES NOT SPIN IN THE BORE. PERIOD. Now, can you use these slugs in a rifled barrel? Yes. Any rifled barrel will shoot any rifled slug. The rifling in a shotgun bore will cut into the rifled slug and produce its own spin characteristics there. HOWEVER, it will not be as accurate as a sabot slug would be in the same barrel. Hope this helps. Just dont let anyone tell you a rifled slug is rifled to grip the inside of a bore and start a spin on it. It does not. If you want conformation, find a super slow motion video of a foster slug exiting a smooth bore. ----Jason Janacek
Last edited by Puma; 11-16-2017 at 09:08 PM.
|
11-17-2017, 08:34 AM
|
|
|
|
Join Date: Feb 2012
Location: N. E. of High River
Posts: 4,985
|
|
The rifled slug is not rifled to produce spin. Shotgun barrels are manufactured to a multitude of bore and choke dimensions. The rifled portion of the slug as well as the hollow base of the slug are designed to make a projectile that will collapse and conform to a variety bore diameters. For the most part, rifled slugs are designed for smooth bores and sabot slugs are designed for rifled bores.
I have heard that rifled bores often produce good results with rifled slugs even if that was not the intent.
I have never heard of smooth bores that produce good results with sabots.
|
11-17-2017, 03:47 PM
|
|
|
|
Join Date: May 2009
Location: Morinville
Posts: 1,316
|
|
I am sure the rifled slugs (Foster) will shoot fine in a rifled barrel but they will lead the heck out of the rifling. I know, I had to clean the barrel for a guy because he complained of inaccuracy, What a mess!
And as Covey Ridge explained, the rifling grooves are meant to allow the lead to displace and conform to the different choke sizes. Which is why it is printed on the rifled slug package that they are safe to shoot thru any choke.
Shoot the rifled slugs thru your rifled barrel if that pleases you.
What ever works. I'm just stating fact.
I'll stick to my Slugs R Us SPW cast slugs and Winchester BRI's.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:33 AM.
|