|
07-05-2010, 10:24 AM
|
|
|
Join Date: Mar 2009
Posts: 622
|
|
Carb cleaner to clean barrel?
Has anyone ever used carb cleaner in their barrel. I'm thinkin outside of the box here.
We're so used to doing it the way the industry or the way it's always been done that sometimes we don't try something different.
The reason that I ask this is that I burn enough ammo that cleaning is really getting tiring. I usually burn up to a hundred rounds or more before I clean. I'm running over 2000 rounds so far this year. It's alot of cleaning.
|
07-05-2010, 10:39 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,585
|
|
There is a thgread here about using Wipeout that actually drifted to using carb cleaner/engine cleaner !
Wha I like to use is Amzoil foaming engine cleaner that you spray into the intake and it is supposed to clean the injectors, intake system, etc.
Smells a LOT like diesel.kerosene, with some other "stuff" added etc!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
07-05-2010, 12:20 PM
|
|
|
Join Date: Mar 2009
Posts: 622
|
|
Cat, I want to give the Amsoil engine foaming cleaner a try, where do I find the stuff? I haven't seen anything like it at CDN Tire or NAPA. Did you find it particularly more effective than the noramal bore cleaners?
|
07-05-2010, 12:54 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,585
|
|
You can buy it at any marine store that sells amzoil stuff.
mercury Quicksilver is basically the same stuff.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
07-05-2010, 12:55 PM
|
Banned
|
|
Join Date: Jan 2010
Location: rollyview
Posts: 7,860
|
|
carb cleaner will not remove copper fouling otherwise it should work ok
|
07-05-2010, 01:14 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,585
|
|
Quote:
Originally Posted by fish_e_o
carb cleaner will not remove copper fouling otherwise it should work ok
|
Exactly, wahat it does do is get rid of the powder fouling so the
de-coppering agent can do its job seaier!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
07-05-2010, 01:33 PM
|
|
|
|
Join Date: May 2007
Location: Uh, guess? :)
Posts: 26,739
|
|
Quote:
Originally Posted by foothillsman
Has anyone ever used carb cleaner in their barrel. I'm thinkin outside of the box here.
.
|
Give it a try and let us know how it works.
|
07-05-2010, 05:38 PM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
Not sure what the ingredients are, but I'll bet they're known to the state of California, to be carciogenic. Used some last winter to clean my quad carb and that smell lingered around for ever. Good enough reason for me not to consider using it for cleaning a gun barrel.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
07-05-2010, 07:38 PM
|
|
|
|
Join Date: May 2007
Posts: 6,927
|
|
Quote:
Originally Posted by foothillsman
Has anyone ever used carb cleaner in their barrel. I'm thinkin outside of the box here.
.
|
I think you mean combustion chamber cleaner specifically designed to remove carbon deposits.
|
07-05-2010, 08:44 PM
|
|
|
|
Join Date: Jul 2007
Location: Edmonton
Posts: 2,195
|
|
Quote:
Originally Posted by Grizzly Adams
Not sure what the ingredients are, but I'll bet they're known to the state of California, to be carciogenic. Used some last winter to clean my quad carb and that smell lingered around for ever. Good enough reason for me not to consider using it for cleaning a gun barrel.
Grizz
|
In California, they might be known as carcinogenic
Bobby B.
__________________
Logic never lies.
|
07-06-2010, 08:59 AM
|
Gone Hunting
|
|
Join Date: Jul 2007
Location: Camrose
Posts: 584
|
|
Carb cleaner
I have been using it for more than 25 years.Spray on a patch and push it through the bore,repeat about 5 times,a clean patch every time and don't pull the dirty one back,it should be clean after 4.Light coat of oil and you should be good to go alway oil after as the carb cleaner dries out the bore.after extended shooting use your copper cleaner and JB to ensure the bore is clean.Use a bore guide.The military uses Break Free in the Gatling guns on the F-18 it also works well.jack
__________________
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting......."Holy ****....What a ride!" -----------Invictus2
|
07-07-2010, 10:01 AM
|
|
|
Join Date: Mar 2009
Posts: 622
|
|
I tried the Canadian Tire carb and combustion chamber cleaner out. It worked as well as any of the cleaners made specifically for guns , but not better. The cleaner contains ammonia, which is the primary ingredient for removing copper from the bore in most other bore cleaners, and it contains oleic acid which helps breaks bond of carbon. Barrel cleaner manufacturers use other chemicals to break the chemical bond. I believe to help prevent damage to finishes on wood stocks.
Curiously I saw CT fuel system cleaner. Costs $15. It's nothing more than mineral spirits. Mineral spirits can be bought at True Value hardware for $4 per liter. It also is used to break down carbon deposits.
The search continues.
|
07-07-2010, 08:44 PM
|
|
|
Join Date: May 2009
Posts: 23
|
|
I have been using Wacky-tire brake cleaner for the last year ( been shooting for 25 years) It works just as well as the expensive degreasers, but I still do a final clean with Butch's to get the rest of the lead / copper out.
__________________
“People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.” - George Orwell
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:51 AM.
|