|
12-06-2009, 09:46 AM
|
|
|
|
Join Date: Dec 2008
Location: east central ab
Posts: 49
|
|
Custom build - Sako action
Do gunsmiths shy away from custom builds centered around sako actions?
Sako rifles seem to be talked of highly in hunting circles, yet very rarely do I see customized sakos on forums or on gunsmithing websites. Could it be the high $$ of obtaining an action, unconventional optics mounting system, or is the three lug bolt undesirable? I keep tossing the following idea around:
300 win mag - sako 75 or 85 ss rec & mag, high quality comp. stock, high quality ss barrel. The rifle would be used for hunting. I am assuming the weight would end up being around 8.5-9 lbs. I have a 3-12 Zeiss victory to throw on top. Any pros/cons, opinions, or suggestions would be greatly appreciated. Is there a certain gunsmith in AB that would be more familiar with this type of build? Thanks for your input.
|
12-06-2009, 09:51 AM
|
|
|
Join Date: Dec 2008
Posts: 1,299
|
|
I have seen a few built on the older A-series /forrester/finnbear actions.
|
12-06-2009, 11:42 AM
|
Banned
|
|
Join Date: May 2008
Location: Calgary-Kootenay Lake
Posts: 350
|
|
Nothing wrong with Sako action. They are excellent, but not so easy to play with like Pem 700, for example, and usually expensive. I think the most desirable sako action for hunting custom rifle is M995 (aka TRG-S). I have one in 6.5x55 (originally 25-06) and I love it.
Henry Rempel installed a barrel. It has a McMillan hunting stock (I'm going to replace it with laminate)
Hoping to get one more action for 280Rem or 280AI.
Goog luck.
Last edited by straight; 12-06-2009 at 11:48 AM.
|
12-06-2009, 01:40 PM
|
|
|
Join Date: Jul 2009
Posts: 32
|
|
The newer Sako actions suffer from a severe shortage of aftermarket parts like decent triggers and stocks.
The actions themselves are ok. Most guys building customs tend to be looking for more particular specialty parts that will serve a specific function. Unfortunately the Sako having a proprietary magazine system makes stock choices very limited. Also the newer Sako triggers were designed to as nothing else would fit or could be fitted with minor modification, so you are pretty much stuck with a mediocre factory trigger.
The older Sako A series and L series you could get good triggers for or could slightly modify 1 for a Mauser as their action layout was quite similar.
|
12-06-2009, 02:28 PM
|
|
|
Join Date: Feb 2009
Location: Rocky Mountain House,AB
Posts: 838
|
|
sakos are a real good action but like longshot said price and lack of options usually point builders in different directions.
|
12-06-2009, 02:57 PM
|
|
|
|
Join Date: Dec 2008
Location: east central ab
Posts: 49
|
|
Are there any custom actions that cycle as well as a sako (and also utilize a quality detachable magazine)? Other factory rifles I have used - rem, win, ruger, browning, savage - all have seemed to have moments when the bolt would bind while cycling a round.
|
12-06-2009, 06:23 PM
|
|
|
Join Date: Feb 2009
Location: Rocky Mountain House,AB
Posts: 838
|
|
Quote:
Originally Posted by greasycheeks
Are there any custom actions that cycle as well as a sako (and also utilize a quality detachable magazine)? Other factory rifles I have used - rem, win, ruger, browning, savage - all have seemed to have moments when the bolt would bind while cycling a round.
|
the nicest smoothest action i ever barreled was a carl gustaf.the smoothest detachable mag rifle i ever rebarreled was an older tikka.both of these will set you back a penny or two used!
|
12-06-2009, 06:45 PM
|
|
|
Join Date: Apr 2008
Location: Calgary
Posts: 472
|
|
Quote:
Originally Posted by greasycheeks
Are there any custom actions that cycle as well as a sako (and also utilize a quality detachable magazine)? Other factory rifles I have used - rem, win, ruger, browning, savage - all have seemed to have moments when the bolt would bind while cycling a round.
|
Yup most of them, but they cost more.
Nesika, Stiller, Dakota, Surgeon, BAT , ALL cycle smooth as butter, with better quality bottom metal like Surgeon, ATRS or Badger which all use Accuracy International magazines they feed extremely reliably. The drawback is that they are limited to certain calibers.
__________________
Extreme Accuracy at Extreme Long Range
|
12-20-2009, 04:56 PM
|
|
Quote:
Originally Posted by greasycheeks
Do gunsmiths shy away from custom builds centered around sako actions?
Sako rifles seem to be talked of highly in hunting circles, yet very rarely do I see customized sakos on forums or on gunsmithing websites. Could it be the high $$ of obtaining an action, unconventional optics mounting system, or is the three lug bolt undesirable? I keep tossing the following idea around:
300 win mag - sako 75 or 85 ss rec & mag, high quality comp. stock, high quality ss barrel. The rifle would be used for hunting. I am assuming the weight would end up being around 8.5-9 lbs. I have a 3-12 Zeiss victory to throw on top. Any pros/cons, opinions, or suggestions would be greatly appreciated. Is there a certain gunsmith in AB that would be more familiar with this type of build? Thanks for your input.
|
I don't know of any that shy away from Sako actions. As mentioned earlier there are many more options for the Rem. 700 platform or a custom action that utilizes the Rem. 700 configuration.
Sako's are fine actions, the 75 and 85 being the peak of modern design and production. Excellent actions. McMillan makes stocks and of course any of the fine custom barrels can be fitted to the action. I believe the bolt handle is still integral to the bolt body unlike the soldered Rem. 700 or custom stiller action.
Both the 75 and 85 would make fine custom guns.
The problem with many aftermarket bottom metal units (typically for a remington) is that they have lost the fine classic style (unlike the Sako). If you like the refined look like the Sako magazine design, don't look to the Surgeon or tactical makes listed.
The Sako TRG was a departure from their refined style with the plastic type material trigger guard and mag bottom.
Last edited by Precisionshooter; 12-20-2009 at 05:12 PM.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:56 PM.
|