Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #91  
Old 12-09-2020, 04:58 PM
ward ward is offline
 
Join Date: Jun 2007
Posts: 967
Default

Quote:
Originally Posted by Northwinds View Post
at this point there are no other plans to reload anything but 12 gauge ammo on it...but ya never know
Well enjoy cranking out the shells and the shooting as well.
Reply With Quote
  #92  
Old 12-09-2020, 05:26 PM
badbrass badbrass is offline
 
Join Date: May 2007
Posts: 1,932
Default

And sorry! I'm cleaning house! After 30 years of reloading, I'm done!
Not much left! Never kept much I did not use! O Well!
Reply With Quote
  #93  
Old 12-09-2020, 10:03 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,293
Default

Sizing in two stages. A run through the FL die and then a mandrel die to set neck tension. I like the Forster press for this.

__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #94  
Old 12-09-2020, 11:00 PM
kujoseto's Avatar
kujoseto kujoseto is offline
 
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
Default

Sized some 6.5x55 brass for when the rifle gets finished soon.
Going to load up some ladder tests next
Reply With Quote
  #95  
Old 12-10-2020, 08:57 AM
Sundog57 Sundog57 is offline
 
Join Date: Feb 2016
Posts: 724
Default

Still trying to find something that will make a good Superformance load in my '06, 165, 175, 180 so far the results have been disappointing. (rifle shoots cloverleaves at 100m with 150s and H4895)
Also waiting to get my hands on some 44mag gear - the complete lack of available ammo this year - zero availability, finally convinced me.
Does anyone here have any experience using Campro 240s in a carbine? - both from a loading perspective and an effectiveness perspective
__________________
Why hunt when I could buy meat?
Why have sex when I could opt for artificial insemination?
Reply With Quote
  #96  
Old 12-10-2020, 09:52 AM
GrandSlam GrandSlam is offline
 
Join Date: Jun 2007
Location: Calgary, AB
Posts: 648
Default

Loading some 6.5CM on my new FA M-Press


Reply With Quote
  #97  
Old 12-10-2020, 11:12 AM
6.5 shooter's Avatar
6.5 shooter 6.5 shooter is offline
 
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,459
Default

Quote:
Originally Posted by psale63 View Post
Well I've been picking away at getting my reloading area set up in my new place the past couple of weeks. In my last place I didn't have room for a proper setup and basically stored everything in 4 Rubbermaid totes and adapted my press and trimmer to clamp to whatever flat surface I could find to use as a temporary work bench. It worked, but was a pain in the arse at times! Now I have a 2ft deep x 5ft long bench with a galvanized sheet metal top where I'll permanently mount my press. Above this I have 3 Mastercraft cabinets which nicely hold all of my tools and components with some extra room for expansion down the road.

I'm looking for ideas on how and where to mount my RCBS case trimmer 2 so it's somewhat out of the way but still accessible. How have others addressed this?
I mounted my trimmers, priming tools etc. onto a 12"x 6'x 1/2" pieces of scrap fencing lumber I had laying around. I store them in my roll away tool chest, when I need a tool I just C-clap them to the top of my work bench. Not fancy but it works and also doubles up the stiffness of the working surface by adding the extra layer of lumber to the reloading bench top.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
Reply With Quote
  #98  
Old 12-10-2020, 11:25 AM
CNP's Avatar
CNP CNP is online now
 
Join Date: May 2007
Location: WMU 303
Posts: 8,541
Default

I had 4 boxes of 12 ga steel BB shotshells that were hangin around that I had to disassemble into components. These shotshells would not cycle in my semi-auto shotgun because the diameter was too large for them to drop into the chamber. I did engage the manufacturer and they have since modified their process and sent me a case of shells for my trouble.

But it was time to dispose of these shells so I've been cutting off the tops, just below the crimp, with a box cutter, emptying out the shot, pulling out the wad and emptying the powder. So I've got a lot of steel BB shot and powder to find uses for.....told the wife I'll perform some firepit magic
Reply With Quote
  #99  
Old 12-11-2020, 09:11 AM
psale63 psale63 is offline
 
Join Date: Sep 2014
Posts: 77
Default

Quote:
Originally Posted by 6.5 shooter View Post
I mounted my trimmers, priming tools etc. onto a 12"x 6'x 1/2" pieces of scrap fencing lumber I had laying around. I store them in my roll away tool chest, when I need a tool I just C-clap them to the top of my work bench. Not fancy but it works and also doubles up the stiffness of the working surface by adding the extra layer of lumber to the reloading bench top.
Thanks 6.5 shooter, I'm thinking I'll stick with this same method. I currently have my trimmer mounted to a scrap section of 2x4 that I would c-clamp to a bench. I'll probably change that out for a fancy piece of scrap 3/4" hardboard or 1x4 I've got lying around to give a low profile look!
Reply With Quote
  #100  
Old 12-11-2020, 07:06 PM
Blackhawk45 Blackhawk45 is offline
 
Join Date: Apr 2012
Posts: 7
Default

Quote:
Originally Posted by psale63 View Post
Thanks 6.5 shooter, I'm thinking I'll stick with this same method. I currently have my trimmer mounted to a scrap section of 2x4 that I would c-clamp to a bench. I'll probably change that out for a fancy piece of scrap 3/4" hardboard or 1x4 I've got lying around to give a low profile look!

I use the rcbs accessory base plate, works good if all your reloading equipment is rcbs.
https://www.rcbs.com/accessories/rel...3/16-9282.html


Sent from my iPhone using Tapatalk
Reply With Quote
  #101  
Old 12-11-2020, 07:17 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,907
Default

Did a run of Campro FMJ bulk 308's for tomorrow's sling 'n' irons steel session at 500.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #102  
Old 12-12-2020, 01:26 PM
6MT's Avatar
6MT 6MT is offline
 
Join Date: Apr 2014
Location: Parkland County
Posts: 1,147
Default

Since it’s so cold (-10c) and the wind is blowing at a gale force this Saturday, I thought I would reload some cartridges for my Timberwolf (C-14) in 338LM. Again for time sake, I’m not showing the de-capping, wet tumbling, or the drying steps.

Step 1. Annealing. After 4 firings with the magnum, time to anneal the cases. Here are the finished cases as they cool on the cooling tray.



Step 2. Full length sizing with the Whidden F.L. Bushing sizing die. I like to bump the shoulder for the magnum -.002”. This measures 2.2620” in the Whidden shoulder bump guage.



Step 3. Trimming. The Lapua cases can grow substantially after sizing. Trim length is right around 2.714”.



Step 4. Priming the cases. Pretty self-explanatory here.



Step 5. Charging the case with 93.6gr of Retumbo.



Step 6. Seating the 300gr SMK’s. I am seating them .010” off the lands (jump). Which gives me a CBTO measurement of 2.966”. (COAL is meaningless because I single feed these.)



And now Kids, we’re done! A finished round perfectly fitted for the C-14. Here’s the finished case in the caliper and the case guage showing a perfect job.



And that’s what makes this a mile plinking rifle....



Actually, I’ve had great success out to 1900m with this combo.
Reply With Quote
  #103  
Old 12-12-2020, 01:47 PM
antler1's Avatar
antler1 antler1 is offline
 
Join Date: Mar 2011
Location: East of the Rockies
Posts: 179
Default 38-55 project

Have my great grampa's 38-55 Win. 94. Its been in the closet for two generations. (Not mine-I have a safe) Bought a set of Lee dies some time ago and the lockdown right now convinced me to learn how to reload for the old lever gun.
I had to do lots of reading to understand the difference in case length between the old 38-55s and the newer ones. Learned about slugging the barrel so I choose the right size bullets- should I use cast or jacketed? Never worked with cast bullets before. Not much for powder data out there- not going to the city to buy any manuals any time soon.
Never worked with a 3 die set before. Never had to crimp the cases before in my other six calibers that I reload. Quite a lot to digest in one go.
In 2004 I set my son up with the rifle and he rattled in a WT buck. Its been stored since then.
Attached Images
File Type: jpg scott's buck 003 cleaned up.jpg (76.0 KB, 51 views)
Reply With Quote
  #104  
Old 12-12-2020, 03:45 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,907
Default

I didn't load anything today-- instead I braved the cold and 25kph winds and sent some 105 Match Kings down range at 500 with the sling and irons to prove to myself I am still as foolish as I was 10 years ago! LOL
As I said to my buddy out there with me, " If you don't practice in these conditions you will never learn how to shoot and win in them!"
I haven't been this cold in a very long time!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #105  
Old 12-13-2020, 10:31 AM
kujoseto's Avatar
kujoseto kujoseto is offline
 
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
Default

Sounds like good hunting conditions practice.
You thaw out enough to post some pics?
Guns, groups? No snotcicles from the moustache lol
Reply With Quote
  #106  
Old 12-13-2020, 10:38 AM
Dubious Dubious is offline
 
Join Date: Jan 2012
Location: Calgary
Posts: 1,559
Default

I finished developing some 25-06 70gr blitsking varmint ammo at a nice tight 1/2” @3850fps. Next project will be shrinking its es it’s about 30 now but would love to get it down below 20 with some annealing seating depth and primer selection.
Reply With Quote
  #107  
Old 12-13-2020, 10:47 AM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,907
Default

Quote:
Originally Posted by kujoseto View Post
Sounds like good hunting conditions practice.
You thaw out enough to post some pics?
Guns, groups? No snotcicles from the moustache lol
No pics yesterday, I often forget to ask get someone too take them, although there were two others out there for a very short time. !
The rifle II was shooting is not a hunting rifle , it was a single shot match rifle in 6mmmBR with central receiver sight and Ptec front , with a single point sling.
Here is a pic from a warmer time!
The spotting scope BTW is NOT on the rifle, it is on a bipod!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #108  
Old 12-13-2020, 12:02 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,293
Default

Went from start to finish on 100 rounds this week. From start to finish.








__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #109  
Old 12-13-2020, 12:50 PM
kujoseto's Avatar
kujoseto kujoseto is offline
 
Join Date: Jul 2011
Location: Strathcona County
Posts: 2,170
Default

Pretty nice setup there Chuck.
What cartridge?
Reply With Quote
  #110  
Old 12-13-2020, 01:00 PM
teledogs's Avatar
teledogs teledogs is offline
 
Join Date: Dec 2012
Posts: 1,656
Default

50 rounds of 223 Rem today.
CFE 223 and 55GR Nosler varmint ballistic tips
Attached Images
File Type: jpg 20201213_125308.jpg (51.8 KB, 35 views)
__________________
There is no God higher than truth - Gandhi

Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
Reply With Quote
  #111  
Old 12-13-2020, 01:29 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,293
Default

Quote:
Originally Posted by kujoseto View Post
Pretty nice setup there Chuck.
What cartridge?
Thanks. 6.5 CM, but I snuck some 223 in the mix as well.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #112  
Old 12-13-2020, 03:02 PM
David Henry David Henry is offline
 
Join Date: Apr 2010
Posts: 823
Default

With a Sunday to myself I finally get to add something to this thread. Went through a big bag of 30-30 once fired brass and sorted head stamps into brands which included a few surprises. Full length sized about 50 of them made by Federal because that's what my Ackley likes, chamfered case mouths and dumped them into the tumbler for the night. D.H.
Reply With Quote
  #113  
Old 12-13-2020, 03:38 PM
Grizzly Adams's Avatar
Grizzly Adams Grizzly Adams is offline
 
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
Default

Set up some .45/70 dies for my son and discovered I don't have a loading block to fit them. Another project for this Covid week .

Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
Reply With Quote
  #114  
Old 12-13-2020, 11:14 PM
brewster29 brewster29 is offline
 
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,190
Default

I installed pillars in my friend's Tikka 30-06 synthetic stock to go with his new Lumley bottom metal.

Then I shouldered (expanded over 8mm expander and sized in my sizing die) 60 cases of new Starline 30-30 brass to give a snug fit in my Marlin 336, and loaded them with Hornady 160 FTX and Hodgdon Leverevolution powder in various charge weights.

No pics, cuz my bench doesn't look anything like those of Chuck or 6 MT.
Reply With Quote
  #115  
Old 12-14-2020, 07:30 AM
Ronji Ronji is offline
 
Join Date: Dec 2012
Location: Edmonton
Posts: 864
Default Reloading Bench

I sold everything off a couple of years ago, and looking at all those photos bring back a ton of memories. Makes me want to start up all over again.
Reply With Quote
  #116  
Old 12-14-2020, 09:06 AM
marky_mark marky_mark is offline
Banned
 
Join Date: Mar 2009
Posts: 5,700
Default

Hey chuck, what scale is that? How do you like it?
Reply With Quote
  #117  
Old 12-15-2020, 10:13 AM
6.5 shooter's Avatar
6.5 shooter 6.5 shooter is offline
 
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,459
Default

Does spending too much at Ward's Auction on reloading stuff count?


If so? then Saturday was busy...LMAO
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
Reply With Quote
  #118  
Old 12-15-2020, 10:48 AM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,293
Default

Quote:
Originally Posted by marky_mark View Post
Hey chuck, what scale is that? How do you like it?
It is the A&D FX 120 I with an AutoTrickler. I like it a bunch. Works very well.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #119  
Old 12-15-2020, 11:57 AM
DLab DLab is offline
Shooting Xs
 
Join Date: Sep 2009
Location: Medicine Hat
Posts: 836
Default

Chuck,
Reloading room related, what did you end up going with concerning a Line Conditioner for your electronics? Also ,how did you make out talking to a Gunsmith about using a reamer on the dies?
I haven't read any responses from you on either.
Thanks
Reply With Quote
  #120  
Old 12-15-2020, 12:41 PM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 16,293
Default

I haven’t picked up a line conditioner yet and it was a no go on the dies.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:48 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.