Ok so i just got my new bow all set up, i am shooting an easton power flight arrow which is a 300 spine and cut to 26.5 inches. My bow is a mission riot and my draw weight is 73 pounds at 27 inches im just curious to know if a 300 spine easton arrow is correct or not
You should be good to go, according to the chart. Could actually get away with a 340 with the arrow that short. These charts work good if your bow is under 320 IBO, Once you get into the IBO speeds of 330, 340, you'll need to move a box to the right to be spined correct. Also, if you use a 125 grain point good to move one spot right. Better to be spined to stiff than too weak.
Im betting if shot in paper [paper training/tuning] you would see a stiff arrow spine reaction with arrows cut at the short length..you are close to border line on the 340 but Im betting at 26.5" the 340 will have plently of spine...
Question about arrow spine
Im betting if shot in paper [paper training/tuning] you would see a stiff arrow spine reaction with arrows cut at the short length..you are close to border line on the 340 but Im betting at 26.5" the 340 will have plently of spine...
APA AIR
Linear Mode
