|
01-06-2016, 01:48 AM
|
Banned
|
|
Join Date: Jan 2015
Location: Calgary, AB
Posts: 2,208
|
|
Slight problem with accuracy...
https://m.youtube.com/watch?v=UUEEV-WAB20
Just put the bipod back on tonight, and noticed this...
Haven't dropped or abused the rifle ever, I'm the 2nd owner (1st one didn't even fire 20rds) with under 200rds thru it.
It's a Model 14 American Classic, .243win with a DBM...
Gonna start the interweb search for dis/reassembly vids & exploded parts diagrams now, but how does this happen & how do I fix/correct it ?
* I plan on bedding the action soon anyway...
...
|
01-06-2016, 04:33 AM
|
Banned
|
|
Join Date: Nov 2009
Location: High River, AB
Posts: 10,788
|
|
Barreled action loose in the stock:
Flip your gun belly up. Jiggle the barrel as you do in the video. Are the 2 action screws moving up and down in relation to the action?
The action screws are loose, because either they aren't torqued properly, or they are swapped front to rear.
Simply remove the action out of the stock noting which action screw is front/rear as they are not the same length & may be backwards.
With the action out, put the action screws back in the stock and note how much they protrude to engage the female threads in the action. Each should engage approx. 1/8" at least. If they are not backwards, it is possible that the threads are stripped, check that.
With the stock's innards exposed, look for cracks behind the recoil lug recess, action screw holes.
Check to see if the stud to which you attach the bi-pod protrudes too far up into the barrel channel making contact with the barrel.
In summary, I don't think that you are facing an insurmountable problem. But you will have to remove the barreled action from the stock and complete a thorough inspection of the barrel/action channel in your wooden stock. If the above tasks seem too daunting, take it to someone that can troubleshoot and repair. In fact, you mention wanting to have it bedded. If you get it done sooner than later, the problem should be readily identifiable, corrected and your gun is bedded.
Last edited by gitrdun; 01-06-2016 at 04:40 AM.
|
01-06-2016, 06:51 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,462
|
|
If the task is too daunting, and you want the rifle bedded, just send a pm to the gentleman above, ^^Gitrdun^^, and he will get her done for you. He is in High River and does great work.
|
01-06-2016, 06:56 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,582
|
|
Not z big deal actually, the action screws are loose.
Could be they see nog tight enough to begin with.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
01-06-2016, 07:06 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,462
|
|
When you take it apart, make sure to check to see there is not any oil anywhere down there too. Clean it up. If you don't have a torque wrench, tighten the screws "good n tight". If you want the very best accuracy, get it bedded, as you initially indicated.
|
01-06-2016, 07:17 AM
|
Banned
|
|
Join Date: Nov 2013
Location: Manitoba
Posts: 1,529
|
|
Good n tight has different meaning to many. As you said torque wrench.
|
01-06-2016, 07:42 AM
|
|
|
Join Date: May 2007
Posts: 15,837
|
|
Quote:
Originally Posted by gtr
Good n tight has different meaning to many. As you said torque wrench.
|
And torque to what exactly gtr?
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
01-06-2016, 08:05 AM
|
Banned
|
|
Join Date: Nov 2013
Location: Manitoba
Posts: 1,529
|
|
Come see me
Quote:
Originally Posted by chuck
And torque to what exactly gtr?
|
There is no exact number, but I'm sure you will enlighten me. I try to tighten the screws evenly to 50 in #. Lots of variables that I can explain if you wish to come for a visit. Some things are better in person.
|
01-06-2016, 08:15 AM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
I am actually surprised that the screws managed to get that loose without being noticed sooner. Take the screws out, remove the barreled action, and clean the barreled action and the bedding area. Then reassemble and torque the action screws. With two action screws, and a wood stock, I generally torque the screws to around 35 inch pounds. If the rifle has the small screw at the front of the trigger guard, I just snug it up. With a quality fiberglass stock, or pillar bedding, I usually use about 45 inch pounds. If in doubt, you can contact the manufacturer for their recommended torque settings.
__________________
Only accurate guns are interesting.
|
01-06-2016, 08:32 AM
|
|
|
Join Date: Jun 2011
Location: Calgary
Posts: 854
|
|
Quote:
Originally Posted by sns2
If the task is too daunting, and you want the rifle bedded, just send a pm to the gentleman above, ^^Gitrdun^^, and he will get her done for you. He is in High River and does great work.
|
X2 I've used gitrdun a couple times to fix, bed and add custom pillars to my rifle stocks, good man!
Kevin
|
01-06-2016, 08:33 AM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
Quote:
Originally Posted by chuck
And torque to what exactly gtr?
|
A complicated question with no easy answer
https://www.brownells.com/.aspx/lid=..._for_Gunsmiths
Torqueing the fastener is often determined by the manufacturers recommendations
__________________
Si vis pacem, para bellum
|
01-06-2016, 09:18 AM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,462
|
|
Come on guys, the OP hasn't disassembled a rifle. You think he is gonna run out and get a torque wrench? Not likely. Good n tight will be good enough in all likelihood for what he is looking for.
|
01-06-2016, 09:46 AM
|
|
|
Join Date: Aug 2008
Location: CNP
Posts: 3,760
|
|
Quote:
Originally Posted by sns2
Come on guys, the OP hasn't disassembled a rifle. You think he is gonna run out and get a torque wrench? Not likely. Good n tight will be good enough in all likelihood for what he is looking for.
|
You are probably right but the best way would be to get a proper fitting screw driver and phone customer service. Ask for torque specs and borrow a torque wrench and do it properly. Maybe customer service has had problems before like this and there is a common cause that needs to be addressed.
__________________
You are what you do, not what you say.
|
01-06-2016, 11:00 AM
|
Banned
|
|
Join Date: Nov 2009
Location: High River, AB
Posts: 10,788
|
|
The thing is about precise torquing is that it will never remain as initially set due to the expanding/ contracting nature of wood due to temperature and humidity fluctuations. Pillars of steel, aluminum or brass eliminate this problem. I see that John's stock wears an Accutrigger making it not overly old. His stock is likely fitted with factory pillars which would make me question how the action screws loosened if that is in fact the case. I know, I know...it's a Savage, but you must admit that the model 14 is a pretty nice gun, albeit a lefty... ☺
Edit: also curious to hear back from the OP is to what he found.
Last edited by gitrdun; 01-06-2016 at 11:13 AM.
|
01-06-2016, 11:10 AM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
Quote:
Originally Posted by sns2
Come on guys, the OP hasn't disassembled a rifle. You think he is gonna run out and get a torque wrench? Not likely. Good n tight will be good enough in all likelihood for what he is looking for.
|
Unfortunately, good n tight varies from person to person. I have seen damage resulting from some people's idea of what good n tight is. The Wheeler torque screwdrivers are not overly expensive, and quite easy to use.
__________________
Only accurate guns are interesting.
|
01-06-2016, 12:12 PM
|
Banned
|
|
Join Date: Jan 2015
Location: Calgary, AB
Posts: 2,208
|
|
gitrdun - thank you for your insight, I will definitely follow your suggestions. I was talking with SkytopB regarding him bedding my action, but he's up in RMH area. PM inbound... And you know, being lefty is somewhat of a curse & a blessing ! You're just jealous...
sns2 - your assumptions are just that, and I'm capable of more than you give me credit for. I've dis/reassembled a few P/A & semi-auto shotguns, built my own 7.5" AR-15 which ran flawlessly, had 2 lever-guns (Win 94 & Rossi R/H) I tore apart a dozen times, and tinkered around with a few rimfire rifles & even changed the stock on one (10/22). But every time I get into something new & want/need to take it apart and/or fix it, I always consult the respective forum to (hopefully) get 1st hand knowledge on the topic...
Everyone else, thank you for your replies.
|
01-06-2016, 03:18 PM
|
Banned
|
|
Join Date: Nov 2013
Location: Manitoba
Posts: 1,529
|
|
Quote:
Originally Posted by elkhunter11
Unfortunately, good n tight varies from person to person. I have seen damage resulting from some people's idea of what good n tight is. The Wheeler torque screwdrivers are not overly expensive, and quite easy to use.
|
That would be kinda like the advice in post # 6 would it not.LOL
|
01-06-2016, 03:34 PM
|
Banned
|
|
Join Date: Nov 2009
Location: High River, AB
Posts: 10,788
|
|
[QUOTE=J0HN_R1;3095900] gitrdun - thank you for your insight, I will definitely follow your suggestions. I was talking with SkytopB regarding him bedding my action, but he's up in RMH area. PM inbound... And you know, being lefty is somewhat of a curse & a blessing ! You're just jealous...
You're welcome John. I'm curious as to what you've discovered if anything other than a few loose screws.....I mean on the gun.
|
01-06-2016, 04:27 PM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,462
|
|
Quote:
Originally Posted by J0HN_R1
sns2[/B] - your assumptions are just that, and I'm capable of more than you give me credit for. I've dis/reassembled a few P/A & semi-auto shotguns, built my own 7.5" AR-15 which ran flawlessly, had 2 lever-guns (Win 94 & Rossi R/H) I tore apart a dozen times, and tinkered around with a few rimfire rifles & even changed the stock on one (10/22). But every time I get into something new & want/need to take it apart and/or fix it, I always consult the respective forum to (hopefully) get 1st hand knowledge on the topic...
|
Sounds like you've got her covered then. From your video it appeared you didn't know how to tighten an action screw.
|
01-06-2016, 05:54 PM
|
Banned
|
|
Join Date: Nov 2009
Location: High River, AB
Posts: 10,788
|
|
According to the OP's post, the first owner hadn't even fired 20 rounds out of it. That seemed a bit odd to me. Why would one sell a gun after only 20 rounds or less if one didn't think that it had serious issues?
|
01-06-2016, 05:57 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,582
|
|
Quote:
Originally Posted by gitrdun
According to the OP's post, the first owner hadn't even fired 20 rounds out of it. That seemed a bit odd to me. Why would one sell a gun after only 20 rounds or less if one didn't think that it had serious issues?
|
Heck, Ive sold guns I hadn't shot, let alone a few rounds!!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
01-06-2016, 06:04 PM
|
Banned
|
|
Join Date: Nov 2009
Location: High River, AB
Posts: 10,788
|
|
Quote:
Originally Posted by catnthehat
Heck, Ive sold guns I hadn't shot, let alone a few rounds!!
Cat
|
Yeah, but he ain't you either.
|
01-06-2016, 06:20 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,128
|
|
Quote:
Originally Posted by catnthehat
Heck, Ive sold guns I hadn't shot, let alone a few rounds!!
Cat
|
I have bought and sold some the same day. I can remember going to pick one up at WSS after waiting almost a year for it to arrive, and then making a deal with someone in the store. I went to the bank with the owner, he paid me, and he took it home instead of me.
__________________
Only accurate guns are interesting.
|
01-06-2016, 07:40 PM
|
|
|
|
Join Date: May 2007
Posts: 6,922
|
|
Sold 2 brand new rifles within the last month, never fired either one.
|
01-06-2016, 07:47 PM
|
Banned
|
|
Join Date: Jan 2015
Location: Calgary, AB
Posts: 2,208
|
|
Quote:
Originally Posted by gitrdun
According to the OP's post, the first owner hadn't even fired 20 rounds out of it. That seemed a bit odd to me. Why would one sell a gun after only 20 rounds or less if one didn't think that it had serious issues?
|
He wanted a " bigger gun"... A caliber that would " take deer, moose, & elk".
I think he said .300 Win Mag.
|
01-06-2016, 10:16 PM
|
Banned
|
|
Join Date: Mar 2009
Posts: 5,296
|
|
Quote:
Originally Posted by Bushrat
Sold 2 brand new rifles within the last month, never fired either one.
|
You’re evil.
But that is not a bad thing.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:56 AM.
|