Load data is readily avail on the bullet mfgr's websites, and on the powder mfgr's websites. The first thing to determine is what bullet YOU want to use.
Then go to that mfgr's site and see what they recommend on load data. Whether or not that load is any good in your gun is up to the gun, and the accuracy standards you want to set. Most magnum cases respond best to near full case capacity or compressed loads using magnum primers and slower burning powders such as IMR 4350 or IMR or H4831, reloader 19, IMR7828.
There is lots of info avail on the .300H&H, it's a good cartridge.
|