Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #31  
Old 03-11-2010, 10:06 AM
walking buffalo's Avatar
walking buffalo walking buffalo is online now
 
Join Date: Dec 2009
Posts: 10,207
Default Model 125

After a futile google search, I'm back to the this question.

CIL Anschutz .22 SLLR Model 125

Value?

Any suggestions for links to sites for gun values?

Thanks for all the help guys, it is appreciated.
Reply With Quote
  #32  
Old 03-11-2010, 08:41 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

Quote:
Originally Posted by walking buffalo View Post
After a futile google search, I'm back to the this question.

CIL Anschutz .22 SLLR Model 125

Value?

Any suggestions for links to sites for gun values?

Thanks for all the help guys, it is appreciated.
The 125's usually go for about $150 - $175.
The reason for this is that they have only one action screw and the rigger is housed in a cast body.
The bolt as well has been known to break at the junction of the two pieces.

That being said, the barrels are still made by Anschutz and can post some incredible groups for an entry level .22!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #33  
Old 03-11-2010, 10:26 PM
canpuma canpuma is offline
 
Join Date: Jan 2010
Location: Saskatoon-ish
Posts: 2
Default

I grew up shooting a similar 125 same one as did my father when it was purchased new..in the 60's when he was a kid. Great little gun, the action and trigger is far better than any of my american built .22s.

.

the shatty scope has since been replaced with a cheap but better BSA

My good friend has a 310(?) and when we went shooting the other day, even properly cleaned his 64 action still seemed clunky at the end compared to the 125 and the both shot roughly the same groups.

+40 years of shooting and never any problem. I love this gun !!

I'll also try hijack this thread with a question of my own

I just purchaced and recived a 22mag both the previous owner and now myself cannot figure out the model. Any Help

64 action
4 shot clip
anschutz marking (of course)
# 519XXX

He registered it as a 141m savage/anschutz but from all my reading it should have the "Savage <> Anschutz " stamped on it which it does not. It has a similar stock the the 141m but does not have the dark inlay at the frount.
I tore it down and found no other marks..???...any help would be good..sorry no pic yet.
Reply With Quote
  #34  
Old 03-12-2010, 05:26 AM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

The 141 is a .22LR, and your 141M is correct as a 22 mag.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #35  
Old 07-14-2010, 09:35 PM
gforce55 gforce55 is offline
 
Join Date: Dec 2009
Location: Fort Saskatchewan AB
Posts: 5
Thumbs up Cil 310

I collect 22 rimfires and have a couple of them, they shoot well with the right ammo, they are worth $300 - $400 depending on condition. If they are worth $900 i will give some one a heck of a deal 2 for $900 and I'll pay the shipping.
Reply With Quote
  #36  
Old 07-15-2010, 12:04 AM
greylynx greylynx is offline
Banned
 
Join Date: Feb 2009
Posts: 12,078
Default

As for a spare clip, be very careful of what is posted on the internet for a replacement for the 125.

It appears that only an Anshutz clip will fit, not even a CIL clip.

Then there are the postings that some Savage clips will fit.

If any of you guys know better, please post.

I am still looking for a reasonably priced Anshutz clip for my Dad's 125.

I remember him buying the gun at Wally's Sporting goods in Dawson Creek in 1965 for fifty bucks.
Reply With Quote
  #37  
Old 07-15-2010, 06:01 AM
Dean2's Avatar
Dean2 Dean2 is online now
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,971
Default

You can make the cheap Savage clip that Brownell's sells work, but my advice is just order the Anschutz clip. They are expensive for a reason. These guys always have them in stock.

http://www.targetshootingproducts.com/
Reply With Quote
  #38  
Old 09-25-2010, 09:35 PM
OntarioTrapper OntarioTrapper is offline
 
Join Date: Sep 2010
Posts: 2
Default CIL Anschutz .22 model 310

I have also inherited a model 310 and while it is excelent shape I was told that at one point the bolt came apart while at a range and would not shoot after that.
I am not sure why it was taken out and how it came apart but upon getting it home I took it out myself and discovered that the firing pin was no longer there! Everything works except that when you pull the trigger you get no bang!
Does anyone know where I could find a replacement?
Reply With Quote
  #39  
Old 09-25-2010, 10:32 PM
Dean2's Avatar
Dean2 Dean2 is online now
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,971
Default

It should be a standard model 64 firing ppin. Order one froo mthe dealer here in Canada. It should not be hard to fit to the old bolt.
Reply With Quote
  #40  
Old 10-29-2010, 08:23 PM
OntarioTrapper OntarioTrapper is offline
 
Join Date: Sep 2010
Posts: 2
Default Replace the firing pin Anschutz 22 model 310

Thanks Dean2 but what dealer?? No idea on where to begin here to find who would carry anshutz parts can any one help out here?
Reply With Quote
  #41  
Old 10-29-2010, 09:17 PM
twofifty twofifty is offline
 
Join Date: Nov 2007
Location: S.E. British Columbia
Posts: 4,579
Default

Try targetshootingproducts.com

They sell Anschutz target rifles and may have spare parts for your rifle.
Reply With Quote
  #42  
Old 10-30-2010, 09:27 PM
mudbug's Avatar
mudbug mudbug is offline
 
Join Date: Feb 2010
Location: 3rd rock from the sun, formerly from 4th rock from the sun
Posts: 5,000
Default

That's a nice looking 22 Walking Buffalo, so nice I think I'll have to find one for myself now without the scope. I have some people that want to learn to shoot and that would be a good starter to teach people with

Last edited by mudbug; 10-30-2010 at 09:52 PM.
Reply With Quote
  #43  
Old 04-09-2014, 09:32 PM
Goddard Goddard is offline
 
Join Date: Apr 2014
Posts: 5
Default model 174 22cal

dose anyone know much about the 22 cal s.l.l.r model 174 single shot bolt action . all i know is it has been in the family for years and is in great condition. just wondering what years they made them and a price rang not selling but just interested to know more. thanks.
Reply With Quote
  #44  
Old 04-09-2014, 09:50 PM
dgl1948 dgl1948 is offline
 
Join Date: Oct 2009
Posts: 1,240
Default

Quote:
Originally Posted by catnthehat View Post
Nope, the 190 is a single shot 64 action in a match rifle stock.
the 180 is the same action in a sporting class stock.
The are charicterized by the right hand safety on the side of the stock, much like a Remington 700 action has.
the 54 action ( a much higher quality action) has a wing safety much like a mauser
The rifle in the pic is a 125.
BTW, I have seen 54's go for $900, and the occasional 64MS, but NEVER a 310!!
They simply are not worth that much.

Cat
I shot a 190 in sporting rifle compotation for years. It did not have a match rifle stock. The stock on the 190 met all the specs for sporting rifle compotation. The 1403 was basically the same as the 190 but it had the match stock. It could not be used in sporting rifle, only match compotation. Both used the 64 action.
Reply With Quote
  #45  
Old 04-09-2014, 10:30 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

Quote:
Originally Posted by dgl1948 View Post
I shot a 190 in sporting rifle compotation for years. It did not have a match rifle stock. The stock on the 190 met all the specs for sporting rifle compotation. The 1403 was basically the same as the 190 but it had the match stock. It could not be used in sporting rifle, only match compotation. Both used the 64 action.
It depends on what style of match stock you are talking about the 100 used a standard rifle stock which is indeed a match stock
The 180 had s completely different stock .
It is the wright that matters for SFC sporting rifle competition , not so much the stock design except for maybe being none adjustable , which is what the standard rifle is made for as well. I am not sure when you started shooting the 190's but I have shot them since before they
were available to the publican the early 60's

Cat

Last edited by catnthehat; 04-09-2014 at 10:43 PM.
Reply With Quote
  #46  
Old 04-10-2014, 05:46 AM
Dean2's Avatar
Dean2 Dean2 is online now
 
Join Date: Dec 2008
Location: Near Edmonton
Posts: 14,971
Default

Quote:
Originally Posted by OntarioTrapper View Post
Thanks Dean2 but what dealer?? No idea on where to begin here to find who would carry anshutz parts can any one help out here?
Check my post right above yours, link to dealer is there. Also, these guys carry parts too.

http://www.nordicmarksman.com/
Reply With Quote
  #47  
Old 04-10-2014, 06:23 PM
dgl1948 dgl1948 is offline
 
Join Date: Oct 2009
Posts: 1,240
Default

Quote:
Originally Posted by catnthehat View Post
It depends on what style of match stock you are talking about the 100 used a standard rifle stock which is indeed a match stock
The 180 had s completely different stock .
It is the wright that matters for SFC sporting rifle competition , not so much the stock design except for maybe being none adjustable , which is what the standard rifle is made for as well. I am not sure when you started shooting the 190's but I have shot them since before they
were available to the publican the early 60's

Cat
I did most of my shooting in the late 60's, 70's and early 80's. If I remember right the match stocks depth was one thing that kept match stocks out of sporting rifle competition as well as weight. The 180 was used by a lot of cadets for target shooting.
Reply With Quote
  #48  
Old 04-10-2014, 06:47 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

Quote:
Originally Posted by dgl1948 View Post
I did most of my shooting in the late 60's, 70's and early 80's. If I remember right the match stocks depth was one thing that kept match stocks out of sporting rifle competition as well as weight. The 180 was used by a lot of cadets for target shooting.
There were many stocks that met the match riflle category and you are partially correct, some of themm did not make the dimensions for sporting rifle, but some also did.

That is why the 190 was fitted with a rail, so it could be slung up for match rifle competition, but still be used in sporting rifle competition.
The 64 action was fitted with a heavier barrel in that stock originally that would not make weight for sporting rifle , it was made for match competition.
All that was needed to do was put the lighter barrel on it to make weight.
Cat
Reply With Quote
  #49  
Old 04-11-2014, 08:40 AM
stob stob is offline
 
Join Date: Jun 2013
Posts: 1,428
Default

very accurate... I bought 2 extra clips on ebay

Looking forwad to see when / if a .17wsm version makes the market
Reply With Quote
  #50  
Old 04-11-2014, 02:59 PM
dgl1948 dgl1948 is offline
 
Join Date: Oct 2009
Posts: 1,240
Default

Quote:
Originally Posted by catnthehat View Post
There were many stocks that met the match riflle category and you are partially correct, some of themm did not make the dimensions for sporting rifle, but some also did.

That is why the 190 was fitted with a rail, so it could be slung up for match rifle competition, but still be used in sporting rifle competition.
The 64 action was fitted with a heavier barrel in that stock originally that would not make weight for sporting rifle , it was made for match competition.
All that was needed to do was put the lighter barrel on it to make weight.
Cat
My 190 had the same stock as the 64MS but had the lighter barrel. It had the rail as well. I used a 54 MS for silhouttes. I should have never sold it but detached retena sort of ended a lot of shooting. The only Anshutz I have left is a 520. I enjoy your knowledge of the Anshutz family Cat. I remember you posting some of your pictures of a few of the strange ones you have in one of our conversations here a year or so ago.
Reply With Quote
  #51  
Old 04-11-2014, 03:26 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

Quote:
Originally Posted by dgl1948 View Post
My 190 had the same stock as the 64MS but had the lighter barrel. It had the rail as well. I used a 54 MS for silhouttes. I should have never sold it but detached retena sort of ended a lot of shooting. The only Anshutz I have left is a 520. I enjoy your knowledge of the Anshutz family Cat. I remember you posting some of your pictures of a few of the strange ones you have in one of our conversations here a year or so ago.
C.I.L. had some pretty cool guns back then, and even today they are quite a bit cheaper than the Anschutz branded guns, lucky for us that like them!!
My first one had a different grip than the later ones, the grip sloped quite a bit as opposed to almost straight down like the later ones.
I just wish they had gone with the light sporter stock with the 54 action , that would have been a real zinger!!
Cat
Reply With Quote
  #52  
Old 05-24-2014, 12:45 PM
elser37 elser37 is offline
 
Join Date: Mar 2011
Location: Deathbridge
Posts: 3
Default

I inherited a model 310 from my dad. I dont know what the value of the gun is but i know i wont be selling mine. It is an amazingly smooth operating and tight shooting gun that i feel is equivalent or superior to the higher quality 22 rifles today. I use marksman guns and sports in lethbridge as my anschutz magazine guys. Awesome rifles. Happy shooting.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:24 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.