Go Back   Alberta Outdoorsmen Forum > Main Category > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2018, 10:09 PM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default gimmicky tools that actually work

Do you have any tools that look gimmicky, yet work great for their job?

One of the ones I have found is a set of Knipex pliers wrench. It's a great tool. I find myself reaching for that tool quite often when doing repairs.
Reply With Quote
  #2  
Old 05-29-2018, 10:15 PM
HalfBreed's Avatar
HalfBreed HalfBreed is offline
 
Join Date: Nov 2014
Location: Parkland
Posts: 1,659
Default

An aerating tool from Lee Valley. It only does 2 holes per stomp, yet works a treat.

Not sure of a multi purpose though.
__________________
I take everything with a grain of pepper, I'm just different that way.
Reply With Quote
  #3  
Old 05-29-2018, 10:53 PM
trailraat trailraat is offline
 
Join Date: Dec 2014
Posts: 306
Default

The Pulaski. Axe on one side hoe on the other. You can chop and dig quite effectively. Use it all the time around the house when working on the yard.

Sent from my Nexus 5 using Tapatalk
Reply With Quote
  #4  
Old 05-29-2018, 11:09 PM
MRM MRM is offline
 
Join Date: Oct 2013
Posts: 151
Default

The "As Seen On TV" Power Jaws pipe wrench from the early 90's has been a last resort more than once over the years. Total gimmick tool, but works as advertised.


https://www.toolsource.com/ball-join...-p-116993.html
Reply With Quote
  #5  
Old 05-29-2018, 11:14 PM
CaberTosser's Avatar
CaberTosser CaberTosser is offline
 
Join Date: Aug 2007
Location: Calgary
Posts: 19,417
Default

I have three sets of those same Knipex pliers (2 in the 10" and a 12"), love 'em. I wish they made them in 15"or 16" too.


The small spring-loaded close-quarters tubing cutters that just about every plumbing tool company makes are great, they seemed gimmicky in the beginning but now they're must-have's. Same goes for a self-lighting torch, I like these units by Turbotorch, hooked up to Mapp gas I can solder and braze to my hearts content and its not just and on/off like with some trigger actuated torches, I can dial in the flame : http://www.airgas.com/p/VIC0386-0851...86-0851:nosale


I've found these Milwaukee USB power source adaptors to be pretty handy, you can use them to power or charge your phones or iPad's etc. Mine was handy when I had my engine cowling off and had no cigarette lighter port to charge from for quite a while. I have them for both Milwaukee's 12V and 18V batteries:

https://www.milwaukeetool.com/Produc...ear/49-24-2371

https://www.milwaukeetool.com/Produc...ear/49-24-2310

I'm really fond of these brass hose quick-connects, just like an air compressor connector and made of brass instead of those Gardena brand ones that I can't look at without being sure I'll break them like a bull in a china shop:

http://www.leevalley.com/en/garden/p...t=2,2280,33160

For gardening I have one of these valves on the working end of the hose upstream of the quick-connect so I can easily change hose attachments. I then have the corresponding fittings on the various attachments including my pressure washer. I also have them on hoses on my service truck as they are very useful tools:

http://www.dahlvalve.com/products/mi...121-04-04F.php
__________________
"The trouble with people idiot-proofing things, is the resulting evolution of the idiot." Me

Last edited by CaberTosser; 05-29-2018 at 11:31 PM.
Reply With Quote
  #6  
Old 05-29-2018, 11:22 PM
fed fed is offline
 
Join Date: Dec 2010
Posts: 318
Default

Quote:
Originally Posted by CaberTosser View Post
I have three sets of those same Knipex pliers (2 in the 10" and a 12"), love 'em. I wish they made them in 15"or 16" too.


The small spring-loaded close-quarters tubing cutters that just about every plumbing tool company makes are great, they seemed gimmicky in the beginning but now they're must-have's. Same goes for a self-lighting torch, I like these units by Turbotorch, hooked up to Mapp gas I can solder and braze to my hearts content and its not just and on/off like with some trigger actuated torches : http://www.airgas.com/p/VIC0386-0851...86-0851:nosale
If your looking for those knipex tools look for a tool truck. They all carry that brand and can get you anything from them. The truck today had probably a 24" or so better pair of chanell locks on there. Worth looking into if you want some?
Reply With Quote
  #7  
Old 05-29-2018, 11:41 PM
CaberTosser's Avatar
CaberTosser CaberTosser is offline
 
Join Date: Aug 2007
Location: Calgary
Posts: 19,417
Default

Quote:
Originally Posted by fed View Post
If your looking for those knipex tools look for a tool truck. They all carry that brand and can get you anything from them. The truck today had probably a 24" or so better pair of chanell locks on there. Worth looking into if you want some?
Checking Knipex's website I don't see any models longer than 300mm, which is the larger pair I have.

http://knipex-tools.com/index.php?id...500&artID=2959
__________________
"The trouble with people idiot-proofing things, is the resulting evolution of the idiot." Me
Reply With Quote
  #8  
Old 05-30-2018, 12:14 AM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default

I do use the hose quick connects, bu I get them from Gregg's. Those are great to have as well. They're brass with a rubber grip.

U want to get the quick connects for an oxy acetaline torch hose as well.

Lock and lube grease gun adaptors are great. A lot less grease winds up on the ground. And a Milwaukee m18 grease gun... Saves a lot of time when one has 400+ grease points on a drill... It pumps out grease like it's possessed... Or on speed...

Oh, and those socket adapters for an impact screwdriver make doing a lot of things so much easier.

Last edited by amosfella; 05-30-2018 at 12:20 AM.
Reply With Quote
  #9  
Old 05-30-2018, 06:11 AM
canuck canuck is offline
 
Join Date: May 2007
Location: NW of Calgary
Posts: 437
Default

Get yourselves a pair of these, they are pretty cool

https://surewerx.com/jet-equipment-t...t#.Ww6UKEgvzIU
Reply With Quote
  #10  
Old 05-30-2018, 08:32 AM
Puma's Avatar
Puma Puma is offline
 
Join Date: May 2007
Location: WMU 214
Posts: 1,816
Default Dog Bone Wrench

Don't know if its a gimmick tool, but I love my Dog Bone Wrenches.

They were made by Craftsman, prior to Stanley wreaking the brand.

Keep one in my tractor tool box, and one in my flat deck tool box.

Last edited by Puma; 05-30-2018 at 08:37 AM.
Reply With Quote
  #11  
Old 05-30-2018, 09:18 AM
Iron Brew Iron Brew is offline
 
Join Date: Oct 2007
Location: To Be Determined.
Posts: 2,190
Default

K. You guys got me researching Knipex. So... Does anybody have a review on the mini set? Seems to me they would be convenient for the job.

Thanks
Reply With Quote
  #12  
Old 05-30-2018, 12:16 PM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default

Quote:
Originally Posted by Iron Brew View Post
K. You guys got me researching Knipex. So... Does anybody have a review on the mini set? Seems to me they would be convenient for the job.

Thanks
I've never used the mini set, but the heat treat on the pliers wrench and the cobra pliers dad got (Yes, I'm using his tools all the time) seems to be very good. The teeth haven't flattened out on the cobra pliers, and there's no gnarling on the pliers wrench, and I've used it hard on some nasty stuff.

They're dad's favorite tools as well.

I like the cobra pliers better than Channelock, as the pliers have a finer adjustment to get the jaws gripping in a more comfortable position for the handles than a channelock set does.
Reply With Quote
  #13  
Old 05-30-2018, 01:15 PM
josey josey is offline
 
Join Date: Oct 2013
Location: Outside Airdrie
Posts: 1,290
Default

Does a breakfast sandwich maker count? I love that thing!
__________________
There are so many people out there who will tell you that you can't. What you have got to do is turn around and say "watch me". - unknown

"If life is tough, it's time to get stronger!" - Joel Runyon (reminder to myself)
Reply With Quote
  #14  
Old 05-30-2018, 01:29 PM
Capt. awesome Capt. awesome is offline
 
Join Date: Apr 2016
Posts: 135
Default

Quote:
Originally Posted by josey View Post
Does a breakfast sandwich maker count? I love that thing!
I gotta second that. great to have for a Saturday morning to make a few sandwiches to take hunting
Reply With Quote
  #15  
Old 05-30-2018, 01:33 PM
Norwest Alta Norwest Alta is offline
Banned
 
Join Date: Jun 2016
Posts: 3,666
Default

Quote:
Originally Posted by Capt. awesome View Post
I gotta second that. great to have for a Saturday morning to make a few sandwiches to take hunting
I'll third. Wish it made 2.

Slap chop is junk.
Reply With Quote
  #16  
Old 05-30-2018, 01:41 PM
josey josey is offline
 
Join Date: Oct 2013
Location: Outside Airdrie
Posts: 1,290
Default

Quote:
Originally Posted by Norwest Alta View Post
I'll third. Wish it made 2.

Slap chop is junk.
Dude!!! https://www.amazon.ca/Hamilton-Beach...ch+maker&psc=1
__________________
There are so many people out there who will tell you that you can't. What you have got to do is turn around and say "watch me". - unknown

"If life is tough, it's time to get stronger!" - Joel Runyon (reminder to myself)
Reply With Quote
  #17  
Old 05-30-2018, 02:00 PM
Norwest Alta Norwest Alta is offline
Banned
 
Join Date: Jun 2016
Posts: 3,666
Default

Quote:
Originally Posted by josey View Post
Thanks I'll tell the kitchen boss. 😁
Reply With Quote
  #18  
Old 05-30-2018, 03:48 PM
ÜberFly's Avatar
ÜberFly ÜberFly is offline
 
Join Date: Jun 2010
Location: Calgary
Posts: 1,921
Default

X4 👍👍
And we have the double!!
Quote:
Originally Posted by josey View Post
does a breakfast sandwich maker count? I love that thing!
__________________
The virtuous find delight in mountains, the wise in rivers.

-Confucius
Reply With Quote
  #19  
Old 05-30-2018, 04:55 PM
dodger's Avatar
dodger dodger is offline
 
Join Date: May 2007
Location: Calgary
Posts: 3,342
Default

Quote:
Originally Posted by josey View Post
Just ordered this bad boy. Thanks for the link.

Dodger
__________________
Freedom comes with responsibility and integrity. Not stupidity and self entitlement.
Reply With Quote
  #20  
Old 05-30-2018, 05:58 PM
Grizzly Adams's Avatar
Grizzly Adams Grizzly Adams is offline
 
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
Default

Don't know about gimmicky, but just bought a nail puller that comes with the California cancer warning.

Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
Reply With Quote
  #21  
Old 05-30-2018, 07:23 PM
Blockcaver Blockcaver is offline
 
Join Date: Oct 2017
Posts: 132
Default Tools

The cheap plastic "folding post level" for installing fence posts plumb that Peavy sells works great and will also level a horizontal pipe brace. Plumbs in two directions. Was <$5 and it got used around our build all the time.
Reply With Quote
  #22  
Old 05-30-2018, 10:58 PM
fishtank fishtank is offline
 
Join Date: May 2010
Location: edmonton
Posts: 3,835
Default

Is fence pliers consider a gimmick tool ? I have one in my garage ... mostly use it as a hammer ..
Reply With Quote
  #23  
Old 05-31-2018, 06:51 AM
josey josey is offline
 
Join Date: Oct 2013
Location: Outside Airdrie
Posts: 1,290
Default

Quote:
Originally Posted by fishtank View Post
Is fence pliers consider a gimmick tool ? I have one in my garage ... mostly use it as a hammer ..
No gimmick tool. It's the larger version of a leatherman :-) "Farm size leatherman"?
__________________
There are so many people out there who will tell you that you can't. What you have got to do is turn around and say "watch me". - unknown

"If life is tough, it's time to get stronger!" - Joel Runyon (reminder to myself)
Reply With Quote
  #24  
Old 05-31-2018, 07:03 AM
Newf Newf is offline
 
Join Date: Aug 2011
Posts: 542
Default

I’ve got a pair of those flip grip pliers that get used pretty often.
Reply With Quote
  #25  
Old 05-31-2018, 07:50 AM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default

Quote:
Originally Posted by josey View Post
Does a breakfast sandwich maker count? I love that thing!
Congratulations on your nuptuals!!!
Reply With Quote
  #26  
Old 05-31-2018, 07:52 AM
josey josey is offline
 
Join Date: Oct 2013
Location: Outside Airdrie
Posts: 1,290
Default

Quote:
Originally Posted by amosfella View Post
Congratulations on your nuptuals!!!
Not sure if I understand. Wedding gift? Nope, I definitely bought mine for myself.
__________________
There are so many people out there who will tell you that you can't. What you have got to do is turn around and say "watch me". - unknown

"If life is tough, it's time to get stronger!" - Joel Runyon (reminder to myself)
Reply With Quote
  #27  
Old 05-31-2018, 08:08 AM
CaberTosser's Avatar
CaberTosser CaberTosser is offline
 
Join Date: Aug 2007
Location: Calgary
Posts: 19,417
Default

Quote:
Originally Posted by josey View Post
Not sure if I understand. Wedding gift? Nope, I definitely bought mine for myself.
He was getting at the same thing about the old politically incorrect joke: “Why does a bride wear white?”

A: So the dishwasher matches the other appliances

The sandwich maker he referred to is bipedal, kisses you and collects shoes and purses.
__________________
"The trouble with people idiot-proofing things, is the resulting evolution of the idiot." Me
Reply With Quote
  #28  
Old 05-31-2018, 08:16 AM
josey josey is offline
 
Join Date: Oct 2013
Location: Outside Airdrie
Posts: 1,290
Default

Quote:
Originally Posted by cabertosser View Post
he was getting at the same thing about the old politically incorrect joke: “why does a bride wear white?”

a: So the dishwasher matches the other appliances

the sandwich maker he referred to is bipedal, kisses you and collects shoes and purses.
tsk!
__________________
There are so many people out there who will tell you that you can't. What you have got to do is turn around and say "watch me". - unknown

"If life is tough, it's time to get stronger!" - Joel Runyon (reminder to myself)
Reply With Quote
  #29  
Old 05-31-2018, 08:22 PM
rockydave rockydave is offline
 
Join Date: Oct 2008
Posts: 20
Default

Quote:
Originally Posted by CaberTosser View Post
Checking Knipex's website I don't see any models longer than 300mm, which is the larger pair I have.

http://knipex-tools.com/index.php?id...500&artID=2959
I have a pair of knipex that are 22" or 560mm long, bought them thru g2s catalog
Reply With Quote
  #30  
Old 05-31-2018, 11:25 PM
brslk's Avatar
brslk brslk is offline
 
Join Date: Oct 2012
Location: Edmonton
Posts: 2,375
Default

I wouldn't consider Knipex Cobras or their plier wrench a gimmicky tool. They've been around for a long time and are the best slip joint pliers there is. I put my Channellocks in the garage sale box a few years ago when I got these.
Attached Images
File Type: jpg k2.jpg (50.0 KB, 66 views)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:00 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.