Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 11-03-2017, 10:18 AM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default Any 17 hornet shooters out there

Well as much as I dislike the look of the savage model 25's i found a new one in 17 hornet for just about half price and have been wanting to try this little cartridge out.

Just looking for real world experience on yotes and reloading combos you guys are liking ive shot a number in the past with an hmr so realize the limitations of the 17 cal but am thinking the hornet will be a nice little close range pelt saver. I primarily use a 22-250 and 223 and own a 204 as well but this little cartridge has been an itch for a while im excited to play around
Reply With Quote
  #2  
Old 11-03-2017, 01:18 PM
tchardy1972 tchardy1972 is offline
 
Join Date: Mar 2008
Location: Nacmine
Posts: 2,286
Default

My next purchase for sure.
__________________
Proud To Be A Volunteer Fire Fighter.
Reply With Quote
  #3  
Old 11-03-2017, 01:55 PM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default

I've shot about half a dozen coyotes with a 17 hornet. One little entrance hole, and I've never seen an exit. I've used the hornady 20 gr vmax. If you hit any vitals, lungs, etc., it's a dead dog. I've used a rangefinder to check, and have killed yotes at 278 yards first shot.

Only negative I've noticed is lack of a blood trail if you have to track one down. Not enough hole to leave any kind of a blood trail. In fact, you're lucky to get more than a few drops outside of the yote, and if there's any kind of heavy fur, the fur will absorb the blood.

Using a CZ 527 american with a Swarovski 4-12 brh for reference. Have to do a good cleaning about every 200 rounds, or accuracy degrades.
Reply With Quote
  #4  
Old 11-03-2017, 06:44 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Well ran a few rounds after work just off my deck at a 50yd target function was good and after sight in put 4 under a 1/2" off a crude rest than rang a steel gong i have at 200yds so looks good so far will give it a better shoot and evaluation when i have more time at 100-200yds and try the 20g vmax i bought this was done tonight with 15.5g ntx.
Most notably i cant believe how queit this round is im sure my 22mag is louder and best of all this model 25 savage is so ugly nobody will want to borrow it on me haha
Reply With Quote
  #5  
Old 11-03-2017, 07:47 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,825
Default

I haven't used the cartridge on coyotes, but for loads, I have had good luck with n120 and Lil Gun with the 20gr v-max. Accuracy is compareable with both at 1/2" at 100 yards for five shots, but about 200fps more velocity with Lil Gun.
__________________
Only accurate guns are interesting.
Reply With Quote
  #6  
Old 11-03-2017, 07:54 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Quote:
Originally Posted by elkhunter11 View Post
I haven't used the cartridge on coyotes, but for loads, I have had good luck with n120 and Lil Gun with the 20gr v-max. Accuracy is compareable with both at 1/2" at 100 yards for five shots, but about 200fps more velocity with Lil Gun.
That was the combo im planning to load lilgun and 20gvmax just waiting for my dies to show up. I picked up 50 rds factory 15.5gntx cheaper than i could buy brass and 50 of the 20g vmax for close to as cheap so im gonna burn them up then start loading.
What primers have you been using
Reply With Quote
  #7  
Old 11-03-2017, 08:29 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,825
Default

Quote:
Originally Posted by dogslayer403 View Post
That was the combo im planning to load lilgun and 20gvmax just waiting for my dies to show up. I picked up 50 rds factory 15.5gntx cheaper than i could buy brass and 50 of the 20g vmax for close to as cheap so im gonna burn them up then start loading.
What primers have you been using
Just a heads up, the Hodgdons online data lists the Lil Gun loads as 9.6 to 10gr. . I am shooting 9.5 gr and am seeing 3680fps, so I see that as the maximum load for my rifle. Some people tried to reach 10gr and were blowing primers. I use the Remington #7-1/2 primer.
__________________
Only accurate guns are interesting.
Reply With Quote
  #8  
Old 11-03-2017, 08:52 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Quote:
Originally Posted by elkhunter11 View Post
Just a heads up, the Hodgdons online data lists the Lil Gun loads as 9.6 to 10gr. . I am shooting 9.5 gr and am seeing 3680fps, so I see that as the maximum load for my rifle. Some people tried to reach 10gr and were blowing primers. I use the Remington #7-1/2 primer.
Thanks for the warning that was the only lil gun loading source i had guess i will watch the chrono on load development. I have a ton of br-4 primers im gonna try. What are you seeing for brass life ive read it can be limited
Reply With Quote
  #9  
Old 11-03-2017, 09:10 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,825
Default

Quote:
Originally Posted by dogslayer403 View Post
Thanks for the warning that was the only lil gun loading source i had guess i will watch the chrono on load development. I have a ton of br-4 primers im gonna try. What are you seeing for brass life ive read it can be limited
I only have a few firings on the cases, no issues yet.
__________________
Only accurate guns are interesting.
Reply With Quote
  #10  
Old 11-04-2017, 09:04 AM
Captainkip Captainkip is offline
 
Join Date: Nov 2017
Location: With my dog Trapper
Posts: 87
Default

A good varmint round forsure. Just hit them right.
Reply With Quote
  #11  
Old 11-04-2017, 11:29 AM
BKG BKG is offline
 
Join Date: May 2010
Location: Calgary Area
Posts: 54
Default 17 Hornet

I have a Savage 25 and did some load development this summer. The best I found was with 9.7 gr of Lil'gun with the 20 gr vmax. It was running 3750. No issues with brass yet but only 3 firings.

I acquired some accurate 1680 but haven't had a chance to try it out yet.

Also just got a CZ 527 so have some more testing to do in the spring.

Last edited by BKG; 11-04-2017 at 11:30 AM. Reason: correct
Reply With Quote
  #12  
Old 11-04-2017, 02:15 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Quote:
Originally Posted by BKG View Post
I have a Savage 25 and did some load development this summer. The best I found was with 9.7 gr of Lil'gun with the 20 gr vmax. It was running 3750. No issues with brass yet but only 3 firings.

I acquired some accurate 1680 but haven't had a chance to try it out yet.

Also just got a CZ 527 so have some more testing to do in the spring.
I will most likely end up with a cz if the cartridge grows on me
Reply With Quote
  #13  
Old 11-04-2017, 02:52 PM
Unregistered user Unregistered user is offline
 
Join Date: May 2007
Location: Calgary
Posts: 5,140
Default

jamescalhoon.com makes the .19 Hornet just a zinger of a cartridge and years ahead of Hornady. would be nice if someone did a .20 hornet.
__________________
Former Ford Fan
Reply With Quote
  #14  
Old 11-06-2017, 09:28 AM
Groundhogger's Avatar
Groundhogger Groundhogger is offline
 
Join Date: Aug 2011
Location: Ontario~looking west
Posts: 1,158
Default

Quote:
Originally Posted by dogslayer403 View Post
Well as much as I dislike the look of the savage model 25's i found a new one in 17 hornet for just about half price and have been wanting to try this little cartridge out.

Just looking for real world experience on yotes and reloading combos you guys are liking ive shot a number in the past with an hmr so realize the limitations of the 17 cal but am thinking the hornet will be a nice little close range pelt saver. I primarily use a 22-250 and 223 and own a 204 as well but this little cartridge has been an itch for a while im excited to play around
I'm following this with interest, as I asked the same questions myself so many times that I finally ordered a 527 Varmint in 17 Hornet myself! Only got it last week, THEN remembered I hadn't considered rings. lol So, mine won't see any action for a while yet.

Curious to know (from the hand loaders) what powders are considered the best for 17 Hornet, whether or not CCI BR4 (my preferred for .223) is a good choice for a primer, etc. Most of what I have for powders are geared for .204/.223/.243...I've never owned a Hornet. From what I gather, you don't want powders on the faster end of the spectrum.

Not trying to hijack the thread, I think the questions are in line...
Reply With Quote
  #15  
Old 11-06-2017, 09:32 AM
Groundhogger's Avatar
Groundhogger Groundhogger is offline
 
Join Date: Aug 2011
Location: Ontario~looking west
Posts: 1,158
Default

...and dies too. I've read a bit about "bushing" dies but have no experience with them. Recommended for 17 Hornet? My only experience is with FL sizing dies.
Reply With Quote
  #16  
Old 11-06-2017, 10:07 AM
amosfella amosfella is offline
 
Join Date: May 2013
Posts: 3,221
Default

I've been using WC735 for powder. I doubt that will help you as last I checked, it's not available. It's kinda in the middle of H322 and H335. I just jamb the case full. Use rem 7.5 primers.

I'm still shooting up the factory ammo I bought as at the time, buying loaded rounds was cheaper then buying unloaded cases by 2 cents a case.

Once I get through the factory ammo, I'll go back to reloading. The reloads shot to a different point, but the group was under an inch at 100 yards.

As for brass life (and a lot of others don't like me saying it), I found that taking spray on lithium grease, and spraying it a rag, and wiping the case with the rage greatly extended the case life. Took 6 random brass. First I fired 3 with full loads till the cases were getting dangerous. 7 shots. Then I lubed the cases, and fired them till they failed. 35 shots. The unlubed cases had case head separation. The lubed cases showed no case head separation, but cracked necks. I wonder how much further the lubed cases would have gone if the necks had been regularly annealed, say every 5 shots. Even after 35 shots, the primer pockets were still tight.

I thing I may still have the cases, but I never sawed them in half. Just checked with a bent wire.

I have a theory about what causes loose primer pockets and case head separation, but I can't prove it at this point.
Reply With Quote
  #17  
Old 11-06-2017, 06:56 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Quote:
Originally Posted by Groundhogger View Post
...and dies too. I've read a bit about "bushing" dies but have no experience with them. Recommended for 17 Hornet? My only experience is with FL sizing dies.
I just ordered some hornady FL dies, 20g vmax and 20g varmagedon, and some lil gun powder I too use br4 for my 223 thats why i hope they work well but most of what i read suggests rem primers.
Ill burn up the 100rds of factory first anyway.
Hogdon data on cfe blk looks good too might try that if lil gun isnt the answer in my gun
Reply With Quote
  #18  
Old 11-06-2017, 06:59 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,825
Default

Quote:
Originally Posted by dogslayer403 View Post
I just ordered some hornady FL dies, 20g vmax and 20g varmagedon, and some lil gun powder I too use br4 for my 223 thats why i hope they work well but most of what i read suggests rem primers.
Ill burn up the 100rds of factory first anyway.
Hogdon data on cfe blk looks good too might try that if lil gun isnt the answer in my gun
I intend to try some cfe blk myself next spring. The Armageddon are just v-max with different colored tips, and the 500 box was actually cheaper than the v-max.
__________________
Only accurate guns are interesting.
Reply With Quote
  #19  
Old 11-06-2017, 07:07 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Quote:
Originally Posted by elkhunter11 View Post
I intend to try some cfe blk myself next spring. The Armageddon are just v-max with different colored tips, and the 500 box was actually cheaper than the v-max.
Good to know guess i have lots of vmax then lol oh well seems to be the way to go anyway
Reply With Quote
  #20  
Old 11-06-2017, 07:46 PM
blackpowderrlw blackpowderrlw is offline
 
Join Date: Jun 2010
Location: donalda ab
Posts: 238
Default 17 hornet

Are the Varmagedden not made by Nosler?
__________________
hold centre
Reply With Quote
  #21  
Old 11-06-2017, 07:53 PM
elkhunter11 elkhunter11 is offline
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,825
Default

Quote:
Originally Posted by blackpowderrlw View Post
Are the Varmagedden not made by Nosler?
You are correct, the Zombiemax are the same as the v-max.
__________________
Only accurate guns are interesting.
Reply With Quote
  #22  
Old 11-10-2017, 04:58 PM
dogslayer403's Avatar
dogslayer403 dogslayer403 is offline
 
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
Default

Well got some shooting in seen some dangerous pressure with factory 15.5g ntx superformance even had a primer leak they shot very well though. Stopped using them pulling bullets to save brass switched to factory superformance 20g vmax pressure signs drastically reduced with it and to my delight shot one 1/2" 3 shot followed by an 8shot string that was just over 3/4" both 100yds followed by a 3 shot group at 290yds that measured 1 3/8" cant wait to see what reloads produce for me even though after seeing factory do that well i may just stick to it lol
Probably not i have a hard time leaving well enough alone
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.