|
10-07-2017, 03:43 PM
|
|
|
Join Date: May 2014
Posts: 275
|
|
How to fix braided line slipping on reel?
I have 8lb braid on one reel and 30lb on another. Problem is that both lines slip on the reel. What do others do to prevent this? I make sure to put it on with tension and I have redone a few times but this keeps happening. I cant remember the brands, Suffix maybe, but was decent quality stuff.
|
10-07-2017, 03:45 PM
|
|
|
|
Join Date: Mar 2016
Posts: 117
|
|
Start with a mono as a backing and a a few wraps of it, then tie your braid to the mono
Sent from my iPhone using Tapatalk
|
10-07-2017, 03:52 PM
|
|
|
Join Date: Aug 2017
Location: Morinville
Posts: 699
|
|
Use mono for a few wraps then double uni knot to your braid and finish spooling , also you can wrap electrical tape on the spool so the braid has something to bite into .... Or buy a pfluger they come braid ready spools now lol!
|
10-07-2017, 03:59 PM
|
|
|
Join Date: Aug 2011
Posts: 521
|
|
Quote:
Originally Posted by slamilton
I have 8lb braid on one reel and 30lb on another. Problem is that both lines slip on the reel. What do others do to prevent this? I make sure to put it on with tension and I have redone a few times but this keeps happening. I cant remember the brands, Suffix maybe, but was decent quality stuff.
|
I do not know if this is the right way, but this is the what has worked for me.
Tie a uni-knot (a slip knot) on the braid. Keep the loop open. fold the loop back on itself 3 or 4 times, making 3 or 4 wraps around the spool before cinching up the knot. This way, you have 3 or 4 counter-turned wraps with pressure on each other
|
10-07-2017, 04:28 PM
|
|
|
|
Join Date: Dec 2008
Location: Lethbridge, Alberta
Posts: 4,067
|
|
Put a small piece of tape to hold the knot to the spool and reel all the line back on.
|
10-07-2017, 04:50 PM
|
|
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,965
|
|
i put my reels in the freezer for a while to shrink the bob, then i wrap some electrical tape around the first 3 wraps of line, then spool the whole thing.
__________________
Trudeau and Biden sit to pee
|
10-07-2017, 05:09 PM
|
|
|
Join Date: Apr 2009
Location: Southern Alberta
Posts: 7,350
|
|
I put on what ever amount of superline I wish to use(some reels have only 50 yds) then I fill the rest of the spool with mono(about 1/8th in from spool lip). Run on to same spool if I have one and if not I run to a spare line spool then back to another spare line spoon then back to the reel I want it on. Bit of work but you get proper amount on the spool. Can save you money this way.
Otherwise I usually run a slight bed of mono, but have used the tape way of doing it. Both work well.
__________________
.
eat a snickers
made in Alberta__ born n raised.
FS-Tinfool hats by the roll.
|
10-07-2017, 05:46 PM
|
|
|
Join Date: Mar 2008
Location: South Alberta
Posts: 288
|
|
Running some mono mono first and then double uni knots to your braided line is easy to do, prevents slippage and saves you some money on how much expensive braided line you need to spool.
|
10-07-2017, 10:43 PM
|
|
|
|
Join Date: Sep 2007
Location: Sibbald Flats
Posts: 1,102
|
|
Quote:
Originally Posted by Dweb
Use mono for a few wraps then double uni knot to your braid and finish spooling , also you can wrap electrical tape on the spool so the braid has something to bite into .... Or buy a pfluger they come braid ready spools now lol!
|
One wrap electrical tape, used this for years works great
Quote:
Originally Posted by DiabeticKripple
i put my reels in the freezer for a while to shrink the bob, then i wrap some electrical tape around the first 3 wraps of line, then spool the whole thing.
|
Interesting, will have to add this to the routine. Makes sense
|
10-07-2017, 11:10 PM
|
|
|
|
Join Date: May 2007
Location: Canmore
Posts: 4,762
|
|
I use the electric tape wrap around the empty spool too. Or better yet, a grippier 'plumbers tape' type if you have any.
__________________
The world is changed by your action, not by your opinion.
|
10-09-2017, 08:27 AM
|
|
|
Join Date: May 2014
Posts: 275
|
|
Thanks all.
|
10-09-2017, 08:53 AM
|
|
|
Join Date: Jul 2010
Location: North of Cochrane
Posts: 6,708
|
|
Timber hitch?
That's what I used to use, before the uni knot was invented, it wasn't perfect but it worked for me.
__________________
"The well meaning have done more damage than all the criminals in the world" Great grand father "Never impute planning where incompetence will predict the phenomenon equally well" Father
|
10-09-2017, 09:13 AM
|
Banned
|
|
Join Date: Nov 2008
Posts: 821
|
|
Small rubber band works. Any tape will leach out glue when exposed to water.
|
10-09-2017, 09:22 AM
|
|
|
Join Date: Oct 2007
Location: Stony Plain, AB
Posts: 530
|
|
jeprli; couldn't agree more. I just picked up a couple of reels at a garage sale, with spare spools. They had a mix of electrical tape, medical tape, and even bandaids used to provide this bite. The tape adhesive "leaked out" to cover the first few wraps, and severely weakened the line on the spool. I f the owner had given line to that point on a big fish, the line would have snapped. Cleaning up this mess was no easy task either! Any of the non-tape suggestions work well for me.
Vic
|
10-09-2017, 12:29 PM
|
|
|
|
Join Date: May 2007
Location: Canmore
Posts: 4,762
|
|
I haven't experienced that 'adhesive leaking' problem yet - but then again, I haven't been that deep into my backing on the tiddlers I've been catching! I think I'll strip some down to the spool and check. Thanks for the warning!
__________________
The world is changed by your action, not by your opinion.
|
10-09-2017, 08:03 PM
|
Banned
|
|
Join Date: Nov 2008
Posts: 821
|
|
It has nothing to do with size of fish. If you cast longer distances line picks up water and you end up with a soaked spool.
|
10-10-2017, 07:02 AM
|
|
|
Join Date: Dec 2013
Location: Edmonton
Posts: 392
|
|
Like all the other guys said you should have some electrical tape... but something se i picked up on is that youve filled your whole spool with braid. If you are doing that make sure that you actually need that much line. Most spools are normally large enough that its more cost effective to wrap 10-20 yards of mono to chew up a little bit of space before you put your braid on so its not so expensive.
Also, to save a litle more a guys can flip the line once if you want another brand new season on it. Every year, or second depending on how much you fish!
Good luck man!
Ps fishin hole will spool for you if youd like
|
10-12-2017, 07:47 AM
|
|
|
Join Date: May 2014
Posts: 275
|
|
I never thought of flipping the line. I'll have to remember that.
|
10-12-2017, 02:47 PM
|
|
|
Join Date: Jun 2013
Posts: 1,406
|
|
a healthy dollop of gorilla glue
|
10-17-2017, 10:04 PM
|
|
|
Join Date: Jun 2016
Posts: 180
|
|
a couple wraps of hockey tape or shin pad tape
|
10-18-2017, 10:07 AM
|
|
|
|
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
|
|
Quote:
Originally Posted by jeprli
Small rubber band works. Any tape will leach out glue when exposed to water.
|
Never had any issues caused by tape glue leaching out on the 10+ reels I have braided line on.
Tape is the industry standard for securing braided line to a spool and almost everyone uses it as do almost all the stores that put line on for you.
Some tapes do have more glue and stickier glue then others. Electrical tape be a little slimy, duct tape can create a bit of a mess and scotch tape is tough to get off. My favourite is what I believe is hockey tape(pretty sure that is what The Fishin' Hole uses). It doesn't have a lot of sticky glue and it has a nice rough surface which the braid grabs onto good(you want to rely more on the friction then the tape stickiness).
I have used electrical tape, duct tape, hockey tape, scotch tape, heck even the little sticky pads that come on a spool of line. They all get the job done in but as mentioned the hockey tape is by far my favourite.
|
10-19-2017, 11:03 PM
|
|
|
Join Date: Dec 2009
Location: Edmonton
Posts: 464
|
|
there is little catches on side of spool, do your knot then go around each side of spool around the catches and carry on filling spool. works for me anyways
|
10-19-2017, 11:27 PM
|
|
|
|
Join Date: Mar 2017
Location: West Central Saskatchewan
Posts: 260
|
|
Electrical tape when you put the line on. If it ever slips when you are fishing, dunk the whole reel in the water for a bit and it is a quick fix.
|
10-20-2017, 05:36 AM
|
|
|
|
Join Date: Aug 2010
Location: Edmonton
Posts: 2,815
|
|
I’ve been known to use the little piece of tape that holds the tag end of the new line to the spool that the line comes on. I put that piece on the reel spool and position the knot right over it. Seems to hold fine.
Sent from my iPhone using Tapatalk
__________________
Princecraft, Humminbird, MinnKota, Cannon, Mack's Lure, & Railblaza Pro Staff
YouTube: Harder Outdoors
Instagram: @harderoutdoors
FB: HarderOutdoors
|
10-25-2017, 12:42 PM
|
|
|
Join Date: Mar 2012
Location: Medicine Hat
Posts: 24
|
|
Piece of tape
|
10-25-2017, 12:49 PM
|
|
|
|
Join Date: Jan 2012
Location: 204
Posts: 5,532
|
|
Has anyone suggested using tape yet?
__________________
"I like to quote my own quotes" ~ Dewey Cox
|
10-25-2017, 01:40 PM
|
|
|
Join Date: May 2007
Posts: 4,461
|
|
Quote:
Originally Posted by Dewey Cox
Has anyone suggested using tape yet?
|
Maybe but no one suggested Gorilla tape yet
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:24 PM.
|